DIY supports for climbing plants - photo. Homemade support for flowers and garden plants For weaving house flowers, do-it-yourself support
Stems climbing plants long. To prevent them from creeping along the ground and deteriorating, it is necessary to install supports. What kinds of trellises there are, what materials they are made of and how they are installed, read the article.
What is a trellis?
This is a multifunctional design. It is used to create comfortable conditions for climbing garden and vegetable crops. Each plant needs its own support. The trellis must be strong, reliable, durable, especially for grapes and climbing roses.
What is a trellis needed for?
Without support, the stems of climbing plants will break, and if they spread along the ground, they will deteriorate. If these are garden crops, the fruits will begin to rot if they come into contact with the ground. Flowers or vegetables grown on a trellis are easy to harvest. Plants will not be trampled, wet or dry out.
In addition, it is convenient to grow climbing plants on a support, since their development can be given the desired direction. And finally, a beautifully made support is always a decoration for the garden. A do-it-yourself trellis for climbing plants is a simple device, thanks to which many problems in growing garden and vegetable crops will disappear by themselves.
Growing plants on a trellis - pros and cons
For climbing crops, support is a necessity, not a whim. A DIY trellis for climbing plants has the following advantages:
- It is possible to move freely between the rows of grown plants without fear of stepping on them.
- On the trellis, flowers or fruits are well blown by the wind, the leaves do not fog up, and water does not form on them. As a result, the plant is not susceptible to diseases, especially fungal ones.
- Collecting fruits or picking flowers is much easier; there is no need to probe each stem in search of a harvest.
- There is no need to constantly turn the shoots over and direct them towards the light.
- The disadvantage of the trellis is the complexity of its manufacture.
Wooden trellis for cucumbers
It is installed after sowing the seeds, before the shoots appear. A wooden trellis can have different design. The reliability of the racks at the edges remains unchanged, since they bear the main load. Therefore, the cross-section of the beams for the outer supports is always larger. With a trellis height of 2.5-2.7 meters, it is 50 millimeters. Internal supports are made from bars with a cross-section of only 35 millimeters.
If vegetables will be grown on the plot constantly, then the cucumber trellis open ground must be a durable structure. To do this, the bars must be prepared from hardwood: chestnut, oak, ash. If you use poplar, maple, or birch for supports, the structure will not last long, it will rot very soon.
But tree supports of even the hardest species are susceptible to the effects of microorganisms living in the soil. To prevent this process, you need to treat that part of the beams that will be buried in the ground with an antiseptic substance several times. You can use drying oil. The wooden trellis is installed as follows:
- At points along the edges of the planned area, you need to drive in support posts at a distance of 2 meters from each other. The pillars go 60 millimeters into the ground.
- The supports must be secured, with the outermost ones installed at an angle of up to 70 degrees. The tilt should be fixed. To do this, metal corners are buried perpendicular to the ground. Then a wire mount is formed. Its edges need to be secured to the corners. To prevent the middle from sagging, it is fixed to the support.
- A DIY trellis for climbing plants should have a strong frame. The ends of the supports are fastened from above with a cross member. The sheathing will be attached to it.
- It is made from slats, each of which is 30-35 millimeters thick. These thin slats are screwed to the frame with self-tapping screws, cells of 15x15 centimeters are formed. To make the structure more durable, the joints are treated with waterproof glue.
- The mesh can be secured with staples. To do this, nails are nailed onto the rail every 50 centimeters, their ends are bent to form hooks. The rope is wound to them and pulled strictly parallel to the surface of the ground.
Metal support for cucumbers
Before you start work, you need to make a drawing of the trellis. In accordance with the size of the area for each part, a right size. The structure is made only of metal: for the supports - reinforcing bars, for the crossbar - thin pipes. In addition, you also need pegs and steel wire. Metal trellis is more durable.
The rods are pre-cut to the required length. To ensure the reliability of their installation, a drill is used. Holes are made 45 centimeters deep. Supports are placed in them, which are fixed in the ground with a hammer. It is important to prevent the presence of voids, otherwise the reinforcement will move. They need to be covered with earth and compacted.
The supports at the top along the edges are connected by a crossbar. For this purpose they are produced welding work. All metal parts should be coated with a corrosion protection compound or painted.
A wire with a cross-section of 3.5 millimeters must be secured between the supports. You need to start fixing the wire from a height of 20 centimeters from the ground. The distance between the tension is set as desired, but not less than 50 centimeters.
Branch support
A trellis for climbing plants is easy to make with your own hands. The simplest and most affordable material is the branches left over from pruning. garden trees. To make a trellis you will need approximately 20 branches with a diameter of 1 centimeter, wire or rope. The work is carried out in the following order:
- First you need to collect the branches, then arrange them into piles depending on their size.
- The first branch is stuck into the ground to a depth of 10 centimeters, next to it is the next one, but at an angle of 60 degrees to it.
- At the next stage of work, the branches are connected. The algorithm of actions is repeated several times.
- The resulting diamonds are given the correct shape by permanently fastening them together. For this, wire is used; if it is not available, use rope.
- The ends protruding beyond the perimeter of the geometric figure are cut off. The result will be a neat, rectangular lattice - a trellis, the dimensions of which may vary.
Wicker trellis
This design looks unusual in the garden. To make it you need flexible willow or walnut branches. The rods are prepared independently or purchased in the store. They are first soaked and treated with antiseptic substances. The intended figure is woven from flexible rods. Then the frame is made from wooden beam, on which the canvas is attached. This trellis is suitable for flowers and climbing garden crops.
Tire trellis
It is easy to set up such a structure. To do this, you need a car tire and a bicycle wheel rim without spokes. It will serve as a support for the upper part of the structure. This original trellis is used for growing climbing plants: flowers and garden crops. The stages of work are as follows:
- The tire must be cut lengthwise with a sharp knife. One part is placed on the bed, cut side up.
- A pole is installed in the center of the circle, in the upper part of which a rim from a bicycle wheel is attached with wire.
- Vertical supports for plants can be wire. It is passed through the holes on the rim, stretched vertically and attached to the tire, which was previously well secured in the ground.
- Soil is added to the inside of the wheel.
- All this is covered with burlap with holes made in it, into which the seeds of climbing plants will be planted. As they grow up, they will begin to stretch upward along the taut wire.
- To temperature regime soil was constant, agrofibre should be spread around the perimeter of the bed. It is removed when the plants reach a height of 15 centimeters.
Such trellises can be arranged in different parts of the garden, or a composition can be created from them. Braided with climbing plants, they look very beautiful.
Arch
Its purpose is to be a support for climbing plants. The arch visually enlarges the garden. It is perceived as an entrance to a new, unknown space. Typically, an arch for climbing plants is installed at the entrance to a garden or yard. You can install it near your house or gazebo. Metal or the best types of wood are used to make the arch. Each material is attractive in its own way.
A good combination is considered to be wood, flowers and leaves of a rich green hue. Plants with thick stems are mounted on wooden arches. However, thin shoots look much better on metal structures. Arches for climbing plants made of metal have the only advantage over wooden structures - a longer service life.
The base of the arch is made of reliable material; concrete is used to secure it to the ground. Once the base is established, the vault is constructed. It can be arched, triangular, or a simple crossbar. The pillars must be at least 1.8-2.0 meters high, otherwise a tall person will have to bend down when passing through the arch.
Support for climbing roses
Using a trellis, you can fence off part of the garden or divide it into zones. A rose trellis is a rectangular frame and a wooden (made of slats) or metal (made of wire) lattice. You can buy ready-made plastic gratings, but they are not in demand. The simplest trellis for roses is made as follows:
- Stands made of wood or metal up to two meters high are buried in the ground.
- Holes are made in them. The distance between them can be 25-50 centimeters.
- Hooks are made from long nails and inserted into the holes.
- The wire is pulled onto the hooks.
- The finished structure is disinfected and painted.
You can make a trellis differently. To all measurements of structural elements, the length by which they will be dug into the ground is added. Each element is bent and reinforcement is inserted into it. This will be the base of the trellis. The curved elements are installed in the desired place in the garden bed, and jumpers are made between them. They increase the stability of the entire structure and will become holders for roses.
Climbing plants for decorating arches
Arches on summer cottage or in the garden add charm and elegance to the area. They are created to shade terraces and create an oasis of silence. There is a large selection of climbing plants that will weave around the structure. But climbing roses, ivy, decorative grapes, clematis, kampsis, hops and others.
Plants entwining the arch are rightfully considered a unique element of the garden. In addition, with their help you can hide from prying eyes the unsightly parts of the buildings on the site and the fence with which they are surrounded.
Climbing plants create their own atmosphere in the garden; with them, the area looks different - brighter, more colorful, more comfortable. There are more places for relaxation and secluded corners formed by a living green wall. And if this wall is also covered in flowers - good mood you are guaranteed, since the energy flowering plants very positive. Supports for climbing plants are various devices for displaying their decorative qualities, also providing the plants with proper growth and development.
Supports can either be created with your own hands or purchased from manufacturers - many companies produce pergolas, arches, and trellises specifically for climbing plants. At one time they were not given due attention, in the courtyards there were hops and maiden grapes, but climbing plants do not deserve oblivion, and today the fashion for vines and bindweed has returned again, and with them our gardens have become much more beautiful and comfortable.
The simplest and most cost-effective support options
Let's consider the option of constructing the simplest support for a climbing plant in the shape of a cone. You will need 4-6 strong long sticks, wire or twine and smaller sticks to create the lattice. We make a marking on the ground - a square, in the corners - recesses for sticks, fix them in the soil, add the rest, connect the tops and tie them. Then we attach small sticks crosswise onto large ones. The support is ready.
It can be used in the garden for pumpkins, cucumbers, grapes, and can also be used for flowering plants - sweet peas, morning glory, kobeya, honeysuckle, ampelous gloxinia, etc. This support is small in size, it is better to use it for climbing annuals - they are more miniature.
It’s very easy to build such a simple support; you don’t have to spend money on materials; they can be made as much as needed. The area will look more attractive, and you will ensure proper growth for the plants
Ready-made forged supports of various shapes can be purchased for miniature climbing annuals. Morning glory, decorative beans, ivy are ideal for them
There are also ready-made supports for hanging and climbing annuals; this is an interesting alternative to flowerpots and hanging pots
Design #2 – support made of chain-link mesh
For climbing plants, a chain-link mesh with large sections will be an excellent support. You can simply buy one and a half to two meters of canvas and stretch it between two wooden or iron posts. Buy a galvanized chain link, or, even better, plasticized – it does not rust and looks aesthetically pleasing. We treat wooden poles with a protective agent, paint metal ones, stretch the mesh, secure them with wire or special hooks - and the support is ready. Over time, the plants will curl it so that the mesh almost completely disappears from view, and you will have a living green wall against which you can place a bench or hammock.
Support for climbing roses made of chain-link mesh with decorative wooden posts. Carved pillars give such support aesthetic appearance, and when the roses grow up, it will become a wonderful element for decorating the garden
Chain-link fences, in addition to their protective function, are a good support for climbing plants; the mesh will be especially quickly hidden from view by grapes or hops, which grow quickly and grow well.
Pergolas, arches and trellises as supporting structures
Lightweight grilles with a diamond or square pattern, made of wood, metal or plastic, have appeared here relatively recently. These are pergolas designed specifically for garden decoration and as supports for climbing plants.
Classic pergola - supporting pillars and a lattice-shaped roof. Wisteria was used as a decorative climbing plant, resulting in a walking gallery of amazing beauty
Pergolas are usually combined with garden decorative elements such as an arch, gazebo, or bench. If a bench and a pergola form a single structure, then in company with a climbing plant, for example, a campsis, you get a very picturesque corner. A classic pergola is a structure of vertical posts with a roof of cross bars in the form of a lattice. Any vines and climbing plants can grow on the roof. This design looks especially beautiful with maiden grapes, when its leaves turn red in the fall, with wisteria.
Very often, a pergola and an arched structure are used as a single whole - this is one of the most beautiful decorative elements, both on its own and in combination with plants. A double arch with a lattice on top can be placed above a gate, a bench, use arches instead of support pillars in a row and create a wonderful gallery. It will look very beautiful with climbing roses.
Forging on the site always looks great; you can order various unique arches-pergolas for the garden and use them as a support for roses, grapes, honeysuckle
Arches made of climbing roses have already become classics - today they are widely used for wedding ceremonies and other celebrations, and such an arch or several on the site will create a festive atmosphere in which you will stay every day
One of the small forms used to decorate the garden is a trellis. Trellis were widely used in Russian noble estates, they came to us from Europe, where they were used to decorate gardens by both simple peasants and noble gentlemen. Initially, this concept meant dense planting in a row of low-growing shrubs or trees forming a green vertical wall. Today, a trellis is also a support in the form of a metal or wooden lattice; a trellis is also called a mesh stretched between the posts.
Unlike a pergola, a trellis can be an independent support - it can be leaned against the wall of the building, fixed in in the right place garden The design can be either light or massive, in a strong frame. You can use either single trellises or a group, creating screens of climbing plants in the garden. , like indoor screens, can be used to zone an area.
Such a fence in the form of a trellis fence is a decoration in itself. The sun penetrates through it, climbing roses look picturesque against the background of a wooden lattice
Options for garden trellises with a plant box. The most convenient way to make them is from wood; in the first case you will get an interesting arch in the center, in the second - a green wall
Such a trellis is very easy to make from thin timber, painted - and you will have the opportunity to accent a separate area of the garden by choosing the appropriate plants
To transform a garden today there is a considerable selection of various interesting devices; choose, experiment, and create your own masterpieces in landscape design.
Climbing vines can enhance any corner. Under natural conditions, nature itself takes care of their support and nutrition. And in gardens, houses and on window sills, support for climbing plants - necessary condition their proper development and the opportunity to maximize their decorative qualities.
Many different options can be purchased in stores, but making flower supports with your own hands is much more interesting and cheaper.
The material from which the support for climbing plants will be constructed depends on the type of vine and the installation location.
Supports can be constructed from both synthetic and natural materials. Products made from bamboo, dry processed branches, and willow twigs look very beautiful. But they are short-lived when installed outdoors. In a rainy summer, bacteria and mold will quickly develop, which can destroy not only the support, but also the plants themselves.
It is widely believed that bamboo is a very durable material that can last up to 8 years. But the bitter experience of many flower growers has proven the opposite. Therefore, it is better to install bamboo support in the house or in a covered gazebo.
Structures made of wire, treated wood, plastic, metal, and stone will last a long time. But if everyone can do wooden and wire products, then to work with other materials you will need skill and a special tool.
Regardless of the material chosen, the support for climbing plants must be stable and durable. Otherwise, it will collapse along with the vegetation.
There are many ideas on how to make flower supports. Below are a few ways to implement them for indoor and outdoor plants.
Cone
The simplest structure is a support in the form of a cone or “wigwam”.
It is made as follows:
- markings are made on the ground in the form of a square;
- 4 long, relatively even sticks are pressed into the corners at an angle and tied together above the center of the square;
- Small twigs or branches are attached crosswise to the resulting frame; you can tie a mesh of soft wire or twine.
This design without plants looks a little rough, but entwined it is very beautiful. Annual vines grow quickly, so the support will be transformed in two weeks.
Using the same scheme, you can make a more durable support from wooden slats, fastening them with nails.
This design is suitable for sweet peas, morning glory and other plants that are not too heavy. It is best to focus on two main contrasting colors.
A large-diameter conical support, on which cucumbers will happily “climb,” is not only a decoration for the garden, a space-saver, but also clean fruits.
Column
It is appropriate to place such structures on both sides of the porch of a house or a garden bench. The manufacturing technology can be extremely simple: stick long, even poles or rods into the ground in a circle and tie them with wire.
And you will have to work hard to create a tall and durable column:
- 4 metal rods are fixed in the cement-filled foundation;
- Several rings of wire are welded to them parallel to each other. Or one long rigid wire in a spiral, fixed at the points of contact with the supports.
Mesh, trellis
Another simple and budget-friendly option for do-it-yourself supports for climbing plants is a mesh stretched between two posts. Indispensable if there is a need to decorate an unsightly fence or wall. Or maybe just create a beautiful backdrop next to a gazebo, bench, or shade an area.
A trellis (or screen) is essentially the same type of support as a mesh, but more durable and decorative. It can be oriented towards the wall, or it can serve as a kind of territory delimiter.
On the picture simplest option trellises: wire stretched over a frame of poles.
A wooden screen is made quite easily: slats are placed on the frame in the form of a lattice.
The trellis-shaped screen looks interesting.
Arch
Arched supports entwined with flowering vines always look festive and elegant. Despite the complexity of the design, this support for climbing plants can also be made with your own hands. Suitable materials are metal, wood, plastic, brick or stone.
The easiest and fastest way to assemble from plastic pipes, which are buried at their ends into the ground, and fastened with wire on the sides and center. But such an arch will not survive the cold winter, so it must be dismantled and sent for storage in a barn or garage.
More complex, but more durable and decorative, is a metal arch.
To make it you will need:
- steel rod with a cross section of 10*10 mm;
- pipe with a diameter of 31-33 mm;
- welding machine.
4 support pillars are cut from the pipe, and arcs from the rod are welded to them. For convenience, all welding work is carried out on the ground. Then the structure is raised, leveled, and the support posts are concreted into the ground. All that remains is to paint.
You can fasten the halves of the arch not in parallel, but crosswise. Then it will be more durable and unusual.
Arches made of logs or beams are less common, but they look original.
Pergola
Perhaps the pergola is the most exotic and freshest trend in the world. garden plots. The word itself is of Italian origin and means “canopy” or “stand”. Since ancient times, these structures have served as support for vines, without any decoration purposes.
It is best to make such a support for climbing plants from wood.
It is quite possible to reproduce a version of a simple design with your own hands. You will need 8-10 wooden beams measuring 50x100 mm, 4 beams for pillars 100x100 mm and concrete mortar.
Sequencing:
- a square area with a side of 2000 mm is marked;
- holes about 60 cm deep are dug in the corners;
- support beams are installed in the holes, leveled and filled with concrete;
- grooves 35 mm wide and 50 mm deep are cut into the beams;
- the beams at the edges are cut at an angle of 45 degrees for decoration;
- After the concrete hardens, two beams are attached to the supports, and the rest are laid on them.
The result is a design like in photo 11.
Bush holders
When designing a site, do not forget about such plant supports as bush holders. They not only give a neat appearance to ornamental and fruit bushes, but also save them from root rot and fungal development by providing ventilation. Similar designs can be bent from wire and installed on one or both sides.
Phlox and peonies also feel comfortable in such a frame, and you can learn about growing them from seeds. And if you deepen the frames further, you can raise the nasturtiums and petunias growing on the ground.
DIY flower supports will undoubtedly fill the house and area with warmth and comfort, regardless of the complexity of the design, but only if they are appearance harmonizes with the general background.
A support for indoor and garden plants is a decorative and practical detail that helps give flowers with insufficiently strong stems the desired shape, improve their growth, and create interesting landscapes. But in order to get the desired effect, it is important to choose the right product. The article will tell you what kinds of supports there are for home and garden plants, what requirements are put forward for them, and how to make such a structure yourself.
Supports are made from various natural and synthetic materials. The choice of option depends on the installation location and type of flower. Products made from willow twigs, processed dry branches, and bamboo look elegant. True, they are short-lived and are not suitable as street supports. In rainy weather, mold and bacteria quickly develop in them, which have a detrimental effect on the condition of the crop. Therefore, it is better to install such products at home.
Structures made of plastic, wire, stone, metal and wood are more suitable for the garden. Wooden collapsible structures are the cheapest. Their shape is round and square. The disadvantage of such products is that over time they begin to rot. After 7-10 years, the supports will have to be replaced.
Metal poles are many times more expensive, but their service life is longer than their wooden counterparts. Pipes can be square or round. The first ones look more aesthetically pleasing. Plastic versions of trellises are lighter and more practical, moisture resistant. For the winter, they can be simply disassembled and stored in the house. In any case, the support must be strong and support the weight of the plant. A lot of useful information in the article about .
Making your own support
The stores offer many different options for supports for indoor and garden plants, but it is much more interesting and cheaper to create the structure yourself.
In addition, you can make a beautiful support of the desired design, size and shape. To work, you will need available tools and a minimum set of tools. You should also decide on the material. Making a product is not difficult, especially if you find a project on the Internet with detailed description and photo. Let's look at how to make flower supports from different materials.
Metal structures for flowers
For creating metal structure For supports, gardeners most often use metal mesh due to its practicality. It is secured to a fence, pole or facade. The material is sold in rolls in specialized stores. First you need to decide on the size of the piece. To do this, you need to decide whether the material will partially or completely cover the surface. Next, markings for fastenings are applied. Holes are drilled and self-tapping screws are inserted onto which the mesh is attached.
The metal mesh is convenient because it is practically invisible behind the flowers. If you have a welding machine, then you can build a more complex, but beautiful option from metal. For example, a structure in the form of a pyramid, slanting grilles, awnings over the veranda, curved arches.
Plumbing pvc pipes, fittings, iron rods, wire - all this is suitable for creating support for flowers. The metal strips and pipes are first sanded, primed and painted. The pillars are fixed to the surface of the earth using concrete. It is recommended to paint it green, black or white. Forged products are also used.
Plastic pipe supports
Plastic is a practical, easy-to-install material. The structure is attached to the wall of the house or buried in the ground. To give strength, they are concreted. They make plastic supports for plants in the form of arches, trellises, trellises. You will need a piece of plastic tube, fishing line and sphagnum moss.
Below is an algorithm for making supports for bushes, shrubs and flowers:
- Take polypropylene pipe the required length.
- Wrap a thick layer of moss 10 centimeters wide around it. In this case, the part that will be in the ground must be left open.
- Compact the wet moss and tie it with fishing line.
- Do the same to the top of the plastic product.
- At the end you need to tie a knot and melt it with a match.
- Make staples from wire.
- Attach the plant stems to the finished structure.
A trellis is also convenient for climbing plants. It is a combination of several plastic trellises connected to each other. Such a structure will provide a pleasant shade. And if you make a ceiling, you will get a good gazebo.
Wooden flower supports
Because wood is an environmentally friendly, durable material, it is often chosen to create support for plants. The following tools will be useful for the job: sandpaper, hammer, nails and saw. You will also need special impregnation against moisture, moisture-resistant paint.
The design is made in the form of:
Bamboo plant supports
It is easy to build structures for grapes of any geometric shape from bamboo. For example, arches, ladders. Ropes are used to secure the jumpers. If the bamboo trunk is strong, it can be used as a pole. A stick of a certain thickness is inserted into the ground and fixed using special clamps. Such products are ideal for supporting large, short and long climbing plants. To protect parts from moisture, they are coated with varnish. To give the product strength, it is recommended to cover bamboo supports with plastic.
With the help of bamboo supports it is easy to build an obelisk for clematis, guide a vine shoot, and support a rose. These products are suitable for most types of plants. They look beautiful and natural among the green foliage.
If a bamboo support for clematis is installed at home, a hole 1 to 2 centimeters deep is drilled in the ceiling for better fixation. The diameter of the hole should match the diameter of the bamboo pole.
Coconut flower supports
A coconut stick makes a good support for flowers. Many people use coconut varieties for sheflera, monstera and other plants consisting of several thin stems. The coconut structure is used to form large flowers that grow in floor planters.
To make a rose support you will need a plastic stick, a wooden stick, coconut fiber and wire. Fiber is sold at an affordable price in any specialized store. One briquette will cost about 150 rubles.
The work algorithm is presented below:
- Take a stick of the required length.
- Coconut fiber soaked in water is wound around it.
- The material is securely fixed using wire.
- The structure is mounted in the center of the flower bed.
- The stems of the plant are tied up or secured with clamps.
The product looks aesthetically pleasing. If all stages of the algorithm are completed, the structure will withstand heavy loads.
Types of structures for plants
All structures that serve as supports for plants are classified into decorative and technical.
The former look aesthetically good even without flowers. What is relevant in autumn and winter time when plants shed their leaves. Decorative options include arches, nets, garden screens, towers, and trellises. The second ones are intended solely for support. They don't look particularly attractive. But they are reliable and durable. Such supports can be mesh or wire.
For indoor flowers
Many gardeners in apartments grow tall plants with large buds and leaves. To support crops and give them a neat appearance, metal-plastic or plastic structures are used. Bamboo sticks tied with moss or twine look good among green foliage. Such products are made in different heights and diameters, taking into account the size of the flowerpot. If the plant is spreading, several sticks are inserted into the pot and secured with rope.
If the plant is climbing, has a fragile and thin stem, support will help give it a beautiful shape and set the desired direction for growth. Small arches made of wood, metal or plastic look good. By tying the stems down, there is a chance to stimulate the formation of new buds. Some gardeners hang trellises on the wall. This design stops the growth of the crop in width and causes the plant to stretch upward. The advantage of choosing such a support is that a sufficient amount of light falls on the pot. Therefore, the flower grows much better and gets sick less often.
For hanging and spreading crops, interior supports consisting of one or more rings are often chosen. The number of elements of the circular support depends on the height of the plant. This product saves space and makes the flower more neat.
For garden crops
Many garden crops need support. For this purpose, different support structures for tomatoes are used. The choice largely depends on landscape design, gardener preferences.
All options are combined into three large groups:
The above classification of fittings is considered conditional. Indeed, often a garden support structure for tomatoes consists of several types of supports. For example, pergolas include pillars, nets, arches, and trellises. The main thing is to combine all the elements correctly.
When choosing the type of support for peonies, it is important to remember: the design elements must be in harmony. Only then will the site look beautiful and aesthetically pleasing.
Requirements for supports
Every gardener wants a plant tied to a support to develop well and please the eye. For this purpose, the supporting structure must be chosen correctly. There are a number of requirements that the support must meet.
Support for indoor and garden flowers should:
- Be reliable and durable. Support the weight of the plant and hold onto the pot well, standing firmly in the ground. For exotic crops, light peat and moss are often used as a substrate. The support will not be able to stand in loose soil. Therefore, it is attached to the pot, and the flowerpot is attached to the windowsill or wall using available materials.
- Allow the plant to spread out completely, evenly.
- Be practical. Stores sometimes sell bulky, pretentious, unstable versions of flower supports. Therefore, it is advisable to create the product yourself. The essence of practicality is that the plant looks beautiful when supported, all branches are well selected.
- Be safe. Therefore, it is better to choose a product from environmentally friendly, natural materials.
- Be attractive in appearance.
