home Heating systems Dishwasher to hot water. Connecting the dishwasher to the water supply and sewerage: we use the connection diagram for work

Dishwasher to hot water. Connecting the dishwasher to the water supply and sewerage: we use the connection diagram for work

Middle-aged and elderly people cannot get used to bills for housing and utility services. Some are so obsessed with this issue that they are constantly looking for something else to save 2-3 rubles on. According to users distributing advice in in social networks, connection dishwasher to hot and cold or only to hot water, will provide significant savings. Is this really true, is it possible to connect the machine to the hot water supply yourself and is it worth doing, let’s find out.

Connection features

Connecting a dishwasher to hot water is not the same as connecting to cold water. It is very important to remember a number of features that must be taken into account when making such a connection.

You should take an inlet hose designed for hot water.
Read the instructions for your dishwasher first. You need to understand whether the manufacturer allows or does not allow the connection of its product to hot water supply.
Between the inlet hose and the outlet of the hot water pipe, install an additional flow filter that will trap impurities contained in the hot water.

Remember! Although the service provider claims that the hot water supplied to the pipes is absolutely clean, our experience tells us the opposite. So it’s better to play it safe and install a filter, and then check it at least once a year.

Before connecting the dishwasher to hot water, you need to assemble all the components. First, we take a high-quality inlet hose that can withstand hot water. By the way, such a hose can be included with a dishwasher, especially if such a machine is designed to be connected to a hot water supply. Secondly, a tee tap, with the help of which you can organize the connection and then turn off the water when the need arises. Thirdly, let’s take any flow filter that fits the inlet hose and we can get to work.

For such work no special tools are required, the hose is quite easily screwed on by hand, but in order to reliably install the tee tap on the outlet water pipe, you need to take fum tape and a small adjustable wrench. So let's get started.

We turn off the hot water so that we are not splashed with boiling water.
Remove the plug from the outlet of the water pipe.
At the end of the pipe outlet, screw a fuse directly onto the thread.

We screw the foam in a small amount against the thread.

We screw ours on and make sure the connection is tight.
We screw a plug onto one terminal of the tee, and screw a fuse onto the other.
We screw the end of the inlet hose onto the free outlet of the tee, making sure that its other end reaches the dishwasher body normally.
We screw the flow filter to the second end of the hose, and then screw this entire structure to the filling valve of the machine.

Finally, we need to open the water and check how tight the connections are. If everything is in order, you can test run the dishwasher connected to hot water. Strictly speaking, a dishwasher needs cold rather than hot water, so the equipment will last longer, but if you really want to connect the “home assistant” to the hot water supply, you can do this. Just keep in mind that there are both pros and cons to such a connection.

Advantages and disadvantages of such a connection

If you connect the dishwasher traditional way and you only use cold water, the machine operates as usual. But if we connect the dishwasher to hot water, some unforeseen situations may arise. Let's start with the advantages of connecting the machine to hot water.

The washing process is faster because there is no need to heat the water in the tank.
The heating element wears out more slowly because it has to be turned on less often. This thesis is controversial, but we will still take it into account.
Energy saving. In this case, we save on electricity, but at the same time we waste expensive hot water, so the money will not be cheaper, but rather more expensive.

As you can see, the advantages are very, very dubious. There is no need to make an effort to turn the information provided and turn advantages into disadvantages, although the final decision is of course yours. Now about the absolute disadvantages of connecting the machine to a hot water supply.

Hot water damages the meshes of flow filters, so they have to be changed frequently. At the same time, you can’t do it without filters either, otherwise all sorts of debris and dirt will end up in the dishwasher.
Very hot water damages the pipes and drain hose of the machine, which reduces the life of the dishwasher.
IN normal conditions When pre-washing in a dishwasher, the dishes are rinsed with cold water, which begins to warm up only during the main wash. Imagine if the pre-rinse takes place in hot water. This will end with the fact that the remains of buckwheat, dough and other food that does not tolerate hot water will stick to the dishes and the quality of washing will decrease.

IN cold water It will be impossible to wash anything, since the dishwasher can heat the water, but cannot cool it.

After reading the above information, many begin to doubt whether it is really necessary to connect their favorite “home assistant” to hot water. If you are still used to standing your ground to the end and it is not easy to convince you, read the next paragraph, which you may find interesting.

About hybrid connection

Some expensive dishwashers have what is called a hybrid water connection. They can be connected in three ways: only to cold water, only to hot water, to cold and simultaneously to hot water. Our experts like the last option the most and here's why.

A user whose dishwasher is connected to both cold and hot water can really save money by choosing the most preferred washing mode. The machine itself will mix hot and cold water in optimal proportions, instantly providing a mixture of water and detergent to the dishes. There is only one drawback here - the abundance of hoses that need to be carefully hidden behind the body. But if you succeed, you can enjoy using a hybrid machine for many years without having to deal with dirty dishes!

To summarize, it should be noted that dishwashers can be connected to hot water supply only if the manufacturer allows this. If you connect a machine that is not designed for hot water, you will ruin the equipment. Good luck!

If you don’t like washing dishes, and your hands treat this work the same way, if you want to relax together after a hearty lunch or a romantic dinner, if you are not one of those who get lost in everyday affairs and value your time, nerves, and take care of your hands, You need a dishwasher!

Is it possible to connect the dishwasher to hot water?

A dishwasher is usually designed to handle cold water only. At least most of the commercially available models. The heater built into the dishwasher brings the water to operating temperature. Different operating modes of the dishwasher use different water temperatures.

There are models on sale that are designed to be connected to hot water; it is known to be somewhat cheaper than heating with electricity. But such people are in the minority. In addition, in our conditions, hot water is often of worse quality than cold water. This may have a negative effect on your dishwasher. Another nuance is that the heater can heat the water to the temperature required for the program to operate, while the temperature of hot water from the tap may be far from hot; it is even now called heated.
At the same time, it is not at all uncommon for people to independently connect their dishwasher to hot water instead of cold. This allows you to save money, unless an individual water flow meter is installed. If we take into account that if hot water is connected instead of cold, it is spent on all operations of the dishwasher operating cycle, then it is difficult to say whether real savings are obtained.

In addition, if you connect to hot water instead of cold, then during preventive maintenance periods, which happens annually, there may be no water available. You can, of course, connect two taps or even install a tee. But it’s hard to say how justified this is.

Thus, to summarize, it can be noted that most dishwashers not only do not require a connection to hot water, but are also not designed for such a connection. However, if you have a desire, it is technically possible to make such a connection. I believe that unless otherwise stated in the user manual, it is better to refuse this method of operating the dishwasher, at least for the period of warranty service.

Pros and cons of connecting a dishwasher to hot water

Yes, indeed, not everything is so smooth when it comes to connecting the washing machine to hot water. So, a washing machine and hot water from a tap – is it possible, are these two concepts compatible?

There are (albeit in small quantities) models of washing machines that are designed to connect to both cold and hot water at the same time. Those. There are 2 hoses suitable for the washing machine. Recently, manufacturers of washing machines have begun to move away from this practice, especially in our country and other post-Soviet countries. This is mainly due to the poor quality of the incoming hot water.

Besides, it's hot tap water carries a lot of impurities, which makes it necessary to clean the inlet filter of the washing machine more often. Plus, hot water is usually harder, which leads to increased consumption washing powder.

Many washing powders are designed to gradually heat up the water, so sudden exposure of the powder to a hot environment will not allow many biological additives to perform their function. The quality of washing, of course, drops.

Disadvantages of connecting to hot water:

The quality of washing noticeably drops, the dirt “brews”, strongly sticks to the fibers of the fabric, and then even during the entire washing cycle it may not be completely washed off. This is perhaps the most important disadvantage.
The powder is not completely washed out of clothes when rinsing. hot water. Do you want to wear clothes soaked washing powder and get a skin disease?
After rinsing with cold water, laundry smells better than after rinsing with hot water, and things do not become gray and washed out.
Hot water in our country is often turned off and it is not possible to do laundry if necessary :)
Time savings will still remain minimal, since the heating element ( a heating element) heats the water within 15-30 minutes.

Advantages of connecting to hot water:
Getting rid of scale on the heating element of a washing machine. It would seem like a huge plus. But you shouldn’t be so afraid of scale, because there are proven recipes for cleaning your washing machine from scale. By the way, you can read about scale and general care of your washing machine at this link.
Yes, connecting your washing machine to hot water saves energy. But how much? The answer and calculations are below.

Let's say you don't have water meters. Then let's calculate the time spent washing machine electricity for one wash. For one wash, a washing machine consumes on average about 2 kW of electricity. For Kyiv, this is equivalent to 24.36 kopecks per 1 kW (tariffs for 2011), i.e. 50 kopecks per kW. If you refuse to heat water and electricity is spent only on operating the electric motor, then the savings will be approximately half. Those. about 25 kopecks is the entire price of the issue. Minor savings, considering all the disadvantages and risks of connecting a washing machine to hot water. It's worth it?

It’s stupid to pay hundreds of bucks and wash, rinse by hand, walk around in poorly rinsed laundry, which also doesn’t smell fresh. After all, that’s not why you bought it. washing machine.

Even though a washing machine consumes a lot of energy to heat the water, the savings own strength and time is more important. Calculate the cost of an hour of your working time and you will immediately understand that interfering with the operation of automation is unprofitable!

Therefore, if your washing machine is connected to hot water, then it is strongly recommended to abandon this stupid idea and connect the washing machine to the water supply, and always using high-quality materials. !

electrolux esf dishwasher smv bosch dishwasher siemens dishwasher Processed

Buying a dishwasher is only part of the task; you also need to connect it and place it in the most comfortable spot. You can, of course, pay money and call a specialist, but the matter is not so complicated that you cannot handle it yourself. On the other hand, connecting a dishwasher requires at least minimal knowledge of electrical engineering, as well as sewerage and plumbing. If you have at least some idea about these industries, you can try to install a dishwasher yourself.

If you decide to connect the dishwasher yourself, you need to have a clear procedure. Then there will be no surprises. Even before installation begins, it is necessary to ensure that there is a separate power supply line that goes directly from the panel. Connection to tees and carriers is not approved by manufacturers. In this case, the warranty is not supported. The socket must be separate, with a mandatory working grounding contact. If there is an outlet, the procedure for connecting the dishwasher is as follows:

If the dishwasher was purchased in the cold season, before plugging it into the network, it should sit indoors for some time. It can and should be unpacked, but it is not advisable to plug it into the network. Tests should begin after it has warmed up to room temperature and the condensation that can form during a sudden change in temperature has dried.

Connecting the dishwasher to electricity: electrical line parameters

A dishwasher can consume up to 2.5-3.0 kW of electricity when heating water. Therefore, a separate power supply line is required to connect it. Since water is used in the process, the equipment carries a potential threat, so there must be a circuit breaker on the line, which in the event of a short circuit (short circuit) will turn off the power supply. To ensure your own safety, you need to install an RCD that will break the circuit if the insulation breaks down. That is, connecting a dishwasher to electricity is possible to a dedicated line on which a circuit breaker and an RCD or one replacing them are installed.

Protective device ratings and cable cross-sections

The ratings of the circuit breaker and RCD for connecting a dishwasher are calculated depending on the current consumed, but in most cases there are two options:

A 16 A circuit breaker and a 25 A RCD with a leakage current of 10 mA. In this case, the cross-section of the cable cores should be 2.5 mm².
The rating of the circuit breaker is 10 A, the RCD is 16 A (the leakage current is also 10 mA), the cable cross-section is 1.5 mm².

Both options are possible. The first one is taken with a significant power reserve; the wiring will work at a minimum load, but such a line will cost more. The second option is less expensive financially and it is also more than efficient (the maximum permissible load is 4.1 kW, which is more than enough, since the average power consumption of dishwashers is 2.1-2.5 kW). But, when buying a cable, . Unfortunately, with a declared cross-section of 1.5 mm², you can end up with 1.2 mm² or even less, which is unacceptable in this situation.

Which outlet should I install for the dishwasher?

A few words about sockets. To connect powerful consumers, which is a dishwasher, power rather than conventional electrical installation products are recommended. In this case, you can count on the fact that the socket will not melt even after several years of operation.

Power sockets are not chosen according to appearance, but by the current for which they are designed. For most dishwasher models, the maximum current consumption will not exceed 11 A, so you can use 10/16 A power sockets. In this case electrical connection the dishwasher will be made in accordance with all the rules, the manufacturer will be required to maintain its own warranty.

Connection to sewerage

It is advisable to connect the dishwasher drain to the sewer. Anyone can do this in an accessible way. If there is a separate outlet in sewer pipe, the drain hose is lowered there, sealing the connection with a special silicone insert. When purchasing it, you need to know the diameter of the outlet and the diameter of the drain hose. The insert is simply placed in the outlet socket, and the hose is inserted on the other side. No additional measures to seal the connection are required, since sealing occurs due to the elasticity of the material.

If there is no separate outlet, the dishwasher drain is diverted into the sink siphon. For this, there are special siphons with side outlets into which the dishwasher drain hose is inserted. Since these siphons are modern, the connection is also very simple: the hose is inserted and that’s it. For greater reliability, the joint can be additionally sealed with fum tape, but this is usually not done.

Connecting the dishwasher to the sewer should be done so that the hose sags slightly in the shape of the letter V. With such an overflow, there is less chance that wastewater from the sewer will end up in the dishwasher. The second option is more reliable, but it is possible with a sufficient supply of drain hose and free space. In this case, it is lifted above the entrance to the siphon, securing the loop with a special holder (in the figure below on the left). Please note that the hose must be positioned so that there are no other loops or kinks. In all these places, water stagnates, which then begins to “smell” strongly. If the hose is too long, it can be shortened.

Sometimes the entrance to the sewer is further away than a standard hose allows for connection. In this case, it is possible to extend the drain hose, but its length should not exceed the maximum permissible distance to the drain, which is indicated in technical specifications. In general, it is better to choose a place to install the dishwasher so that the hose does not have to be extended. This way the pump is guaranteed to work longer.

How to connect to the water supply

To connect the dishwasher to the water supply, any end point is suitable - a tap, faucet, etc. If there is no outlet, you will have to cut the line, insert a tee (or fitting with a tap), to which you then connect the dishwasher supply hose.

When connecting the dishwasher to the water supply, connect the inlet hose to the created outlet. A tap is installed on the outlet, then a filter (at least coarse mechanical cleaning) and only after that the hose from the dishwasher is connected. A filter is highly desirable. It doesn’t cost that much and can save you from the need for premature repairs. You also need a tap - so that you can, if necessary, turn off the water supply to the dishwasher, and not turn off the water in the entire apartment or house.

All connections can be wrapped with fum tape or, in the old fashioned way, you can use packing paste and linen winding. Tighten connections better with your hands, putting in a good effort. The key in this case is dangerous, as it can be overtightened. After connecting the dishwasher to the water supply is completed, smoothly open the tap to supply water. If the connections do not get wet, everything is fine, you can test run the machine.

Reinstalling the dishwasher

The last stage of connecting the dishwasher is installing it in a permanent place. If the machine is free-standing, place it in the chosen place and level it using a level. You need to check both vertically and horizontally. There are height-adjustable legs for display. Controlling the position with a level, we use these legs to correct the position of the body. This procedure must be carried out carefully, since the quality of washing and drying dishes depends on it. When the machine is set crookedly, jets of water do not fall into the places where they should be, which is why the dishwasher washes dishes worse. Another nuisance if the machine is positioned incorrectly is that the water will not be completely removed, which will make it worse for the dishes to dry.

When installing a fully integrated dishwasher, it is important to align it correctly. If you ordered the cabinet when you had already chosen the model, it will be made for you according to the body parameters. Usually leave gaps of 5 mm on each side so that the machine can be pushed in. When leveling it, it is raised so that its top rests on the tabletop. To install a dishwasher, it is raised to the desired level using adjustable legs. If the cabinet is too high, place chipboard on the bottom or under the legs, but there should be no gaps.

After the built-in machine is set in height and level, it can be secured. In most cases there are several holes on the sides and top of the case. Also included is a pair of brackets. We attach the dishwasher to the side walls of the cabinet through the side holes. Then we screw the brackets on one side to the dishwasher body, and on the other to the countertop. You should not pay too much attention to the choice of fasteners. This fixation is more necessary for confidence, since the dishwasher stands still without fastening and does not move anywhere.

Questions may arise when installing a fully integrated dishwasher in a cabinet that is too wide. This happens if the unit was purchased after the kitchen set was ordered. There are several options to solve the problem. The first is to screw the slats to the sides - front and back, and then fix the body to the slats. The second way is to make false sides from laminated chipboard. The thickness of the chipboard must be selected so that the width of the opening is 10 mm or so greater than the width of the car. Screw the “secondary” side panels to the cabinet frame, and secure the machine body to them. The second method is more expensive in terms of money, but in this case there is no gap in which debris, dust, etc. accumulate.

A useful appliance in the kitchen is a dishwasher. It helps to save water, valuable time that can be spent on proper rest, communication with family, and doing household chores. If the family is large and everyone loves delicious home-cooked food, by the end of the day a lot of dishes accumulate, left over from preparing and eating food.

This wonderful device will easily cope with the task of washing dishes; the quality of the wash will surprise the demanding housewife. When the machine is purchased, it needs to be installed and connected. Below is step-by-step instruction, which will tell you how to connect a dishwasher with your own hands to water supply, cold and hot water, sewerage, electricity, how to choose the right place, how to install equipment.

Dishwasher in the kitchen

Dishwashers are gaining great popularity and are often found in apartments and houses. Washing dishes in a machine is convenient and comfortable. The device allows you to save water consumption and electricity required to heat water. It is not surprising that a dishwasher is present in many homes or is planned for the nearest purchase. The best time to decide to purchase this device is when renovating a kitchen.

If the place is determined and prepared, you can install the machine at any time. Installation work are not complicated, you can successfully complete them yourself. What is needed to connect a dishwasher?

The dishwasher does not require any special installation. After installing the machine, you will need to connect to the main networks:

electricity,
water supply,
sewerage.

In some cases, you can connect the device to hot water, but not all models allow this method; this should be indicated in the instructions.

Preparing the installation site

First you need to decide on the location of the equipment. It is advisable to foresee the placement location in advance in the kitchen design, but you can easily install it at any time if the necessary networks are nearby: water supply, sewerage, electricity.

The best option location - near the sink. Before purchasing, it is necessary to evaluate the amount of space available, because the equipment is offered in different sizes. To gain additional space, it is worth giving up one kitchen cabinet.

Freestanding models have standard widths:

60 cm,
45 cm.

The standard depth is 60 cm, height is 85 cm. In most cases, the machines are equipped with legs that allow minor adjustments (raise, lower by 2-4 cm). Some freestanding models allow for under-counter mounting kitchen set, they are filming top cover. Built-in machines have similar dimensions.

Installing and connecting a built-in machine will require great accuracy in measuring the installation location. The built-in option must be provided at the stage of ordering kitchen furniture. When the machine is built-in, any intervention is difficult or impossible.

An interesting solution is a compact dishwasher installed on the kitchen table. The compact model resembles a home microwave oven in appearance and does not require much space. Compact appliances will complement a small kitchen, where standard size It is impossible to supply equipment. Compact models are purchased by residents of rented apartments, childless couples, and bachelors.

What kind of water can I connect to?

The machine must be connected to a water supply, usually cold water. Some models can use hot water at 60°C. However, the profitability of this option is noticeable in the following situations:

water is heated by use alternative sources energy ( solar collectors, heat pumps);
hot water is supplied by a boiler or gas heater, you can save a little, because the energy from burning gas is cheaper than electricity;
The water is heated by a solid fuel boiler or a fireplace with a water jacket.

Using hot water is useful if the heating element burns out; replacing this component is expensive. Unfortunately, in modern technology, spare parts do not last very long; they are sold assembled, as a unit, so replacement is expensive. As the experience of the author of the article shows, this rule applies to little-known and popular brands present on the market household appliances.

Before connecting to the water supply, you need to make sure that the water:

not too hard
does not contain large amounts of iron, manganese.

What hardness is acceptable?

if the total hardness is less than 7 on the hardness scale, there is no need to use conditioner - the water is considered soft;
If the total hardness exceeds 7, water softening should be used.

When heated, compounds contained in water decompose into insoluble carbonates, forming scale (a phenomenon known to people using electric kettles).

Increased water hardness can:

damage the device,
significantly reduce the quality of washing.

To reduce hardness, it is necessary to install appropriate main filters at the entrance of the water supply to the apartment or directly in front of the equipment.

Connection to water supply

You can connect the water to the dishwasher yourself. Each machine is equipped with a water supply hose. Depending on the manufacturer, the lengths of the hoses are:

If the hose in the purchased model is too short, you need to purchase an extended version. It is not recommended to extend water hoses by connecting them to each other, as this may cause water leakage at the joints.

An easy way is to connect the dishwasher to the water - under the sink. Flexible high-pressure hoses that need to be hidden in the sink cabinet are suitable for these connections (the hose is included with the machine).

To connect you need

Turn off the main water supply valve in the apartment.
Unscrew the pipe.
Water is supplied to the sink through 2 pipes (cold and hot). A tee with a faucet for the machine is installed on the cold water pipe. If the dishwasher is connected to hot water, a similar tee is installed on the hot water pipe.
We screw the high pressure hose to the faucet and to the machine.

Checking the tightness of the system

After installing the pipes, it is necessary to check the tightness of the system. The tightness is checked by opening the main tap in the apartment, and then after the first start of the machine.

It is important to check the pressure in the water supply system. To operate the device, it is sufficient to provide a water supply of at least 10-15 l/min; the water pressure must have the value specified by the manufacturer (range: 0.1-1 MPa).

How to install a dishwasher yourself, video

Connecting a dishwasher to the sewer - options

Most dishwashers have their own hoses and tubes for draining used water. They have different lengths, but the outflow pipe, if necessary, must be lengthened while maintaining the necessary tightness.

Attention! To prevent unpleasant odors from appearing in the dishwasher, it is important to remove Wastewater with the proper slope.

If the sewer system is being built from scratch, it should be remembered that near the location of the device there must be an outlet to the sewer with a diameter of at least 4 cm, preferably with an inlet opening directed upwards, possibly extending horizontally from the wall. The bent end of the flexible drainage hose, which is usually equipped with the machine, must be placed in the drain pipe and secured to the wall with a special handle so that it does not fall out.

Connection to the sewer, photo

You can use a special rubber plug with a hole for the hose or a plastic sewer connection with a 1/2-inch connection to attach the drain hose.

If there is no drain to which the dishwasher can be connected directly, you can use a sink trap. You will need to replace the top fitting of the siphon with a tee for connection with a side connection. The design of some siphons includes a tee fitting for installing a drain pipe, then you do not have to install anything additional. This connection is used to install the drain hose. To increase the tightness of the connections, you must additionally use clamps.

The minimum height of the drain hose is 40 centimeters. The height of the drain hole is usually specified by the manufacturer in the instructions. Compliance with this slope will protect against unwanted odors from sewer pipes.

Scheme. Drain height - installation rules

Electrical connection

All devices available on the market operate at a nominal voltage of 220 V, have electrical cable with a fork.

Important! The outlet must be grounded.

It is worth noting that for safety reasons this should not be done when connecting to the mains. Dishwashers are equipped with a system that interrupts the water supply when malfunctions or internal leaks occur.

What not to do!

An extension cord must not be used. According to safety regulations, the machine should be connected directly to a grounded outlet.
Location of sockets. If the appliance is installed next to a sink, there is a electric outlet, and there is a risk of contact with water. You should ensure safety - consider installing a moisture-resistant outlet. This issue is especially important if children live in the house.

Using the above rules, you can easily connect the dishwasher to the networks with your own hands. You will need a little skill, basic tools, a tee, a faucet. Installing a dishwasher is not difficult, it is important to follow the recommendations exactly. If the task is to do the installation professionally, to prevent sudden flooding of the apartment, it is better to entrust the work to a plumber.

How to properly connect a dishwasher to hot water? Most models are designed to be connected to a cold water supply, so check the instructions first. It will indicate how and in what sequence to act. According to consumer reviews, by connecting equipment to a hot spring, you can save on electricity consumption. Is it so? We'll look into it in the article.

Is hot water needed to connect the PMM?

Depending on the brand of your dishwasher, the instructions indicate degrees for correct connection. Does the appliance work without hot water? For example, for Bosch models no more than +20 degrees is provided. This means that connection to a hot water supply is not possible. Otherwise, your warranty may be voided.

Do you think you can save money by using high-temperature water? After all, then the heater will not work, this will reduce electricity bills. Why do manufacturers recommend using cold water supply?

The permissible water temperature for a dishwasher is 60 degrees. Using a source with elevated temperatures will damage the filtration systems.
Hot water carries more debris than cold water. You will need to install an additional cleaning filter.
Hoses quickly deteriorate and gaskets wear out. When exposed to high temperatures, hoses and pipes may bend and connections may weaken.
The quality of dishwashing decreases. Pre-rinse to remove food residues always with cold water. Otherwise, pieces and particles of food will stick to the plates.

Remember! The dishwasher can heat the water, but not cool it.

Keep in mind that hot water has higher pressure than cold water. With a conventional mixer, the high-pressure flow will flow through the low-pressure flow pipe. Therefore, you will have to install a special mixer that will block one channel.

Connection steps

Collect everything necessary tools and details for convenient operation:

an intake hose that can withstand high temperatures (if your model is designed for such a connection, the hose is included);
brass tee with shut-off valve;

special mixer;
cleaning filter;
wrench;
fum tape for sealing.

Doing the work yourself:

Turn off the water supply.
Prepare the water pipe outlet.
Install a brass tee to the pipe outlet.
Connect the intake hose to the tee.
Attach a filter to the free end of the hose.
Connect the structure to the dishwasher.

Carefully seal all connections with fum tape, wind it against the thread at least 10-15 times. Now open the water supply and check that the connections are correct. Is nothing leaking? Feel free to test run the PMM.

Other connection options

In more expensive dishwasher models, it is possible to connect to water in three ways:

to cold;
to hot;
to both sources at once.

The latter option is a success. The equipment independently mixes the streams, bringing the water to the desired temperature. You really save on electricity; you can choose the dishwashing mode yourself.

The hybrid connection requires a large number of hoses, which is not always convenient or aesthetically pleasing. But if you find a way to connect everything neatly, then you can use the machine to your satisfaction.

Think twice before connecting the dishwasher according to the instructions. This can damage not only the dishes, but also equipment in general.