DIY table for a hand-held circular saw. Reliable DIY table for a circular saw

Most people who work professionally with wood would like to have all the necessary machines at their disposal. But unfortunately, this is not always possible. Some people don't have the space to do it, others, and I think the majority, it's money. Any, even the most primitive machine is quite expensive.

But what’s stopping you from just doing it yourself? Nothing is impossible for a person with intelligence. For every carpenter, a circular saw is the main tool. But it happens that only hand saw, and this is not always convenient for large volumes of work. In order not to purchase a separate tool, you can make a stationary mini saw yourself for ease of work - make a sawing table (stand) for it.

Table saw

When choosing a circular saw, you need to be guided by the following characteristics:

• Saw power. If the amount of work is quite large, it is advisable to take a tool with a power of at least 1.2 kW.
• Cutting depth. The thickness of the material to be processed depends on this parameter. For hand saws it is 40–70 mm. But when installing it in a table there will be a decrease of around 10 mm.
• Button placement. The design of the sawing table must provide free and safe access to all control buttons, otherwise it will be necessary to modify the control system yourself.
• Rotational speed. For cutting wood, high rotation speed is preferred. This affects the cutting quality. For plastic, for example, this is not very good. Due to the high rotation speed of the circle, the plastic heats up. You need to choose average characteristics. 3-4 thousand rpm will be enough.

Do-it-yourself table for a circular saw, installation, fastening

To make the saw table itself, you will need to acquire materials that are sold at any hardware store.

We will need:

• plywood 15–20 mm thick;
• timber 50*50 mm;
• boards, approximately 50*100 mm;
• switch;
• socket;
• self-tapping screws;
• PVA glue;
• rollers;
• metal corners.

Making a workbench

1. Mark and cut a tabletop from plywood the right size. Clean the surface with sandpaper.
2. At the bottom of the tabletop we mark places for holes for attaching the saw. To do this, you need to remove the blade and install the saw in Right place, making notes. The holes for the bolts are countersunk on the surface, and the heads of the bolts need to be sanded.
3. If the material will be cut at different angles, the hole for the disk should be made in the shape of an inverted trapezoid.
4. Mark the places where the stiffening ribs are attached to the tabletop (from below, at a distance of about 8 cm from the edge). The legs need to be secured to the ribs. The ribs are screwed on with self-tapping screws at intervals of 25 cm and glued with PVA.
5. The legs are made from timber 100 cm long. Then a screed is made from timber for additional strength.
6. To be able to adjust the height of the table legs, nuts and M14 bolts are attached from below.
7. We fix the saw from below.
8. We attach the socket to the inside of the table. From it we pull the wire to the switch.
9. We make a parallel emphasis. We cut two strips of plywood, the same length as the width of the table. The width of the stripes is 10 cm. We make the corners round. We sand both strips and fasten them with self-tapping screws. Then we cut two strips of the same length, but three times wider. We fasten them. This will be the guide. We fasten the stop and guide. We set a right angle relative to the disk. We attach the rollers.

Table drawings for a circular saw

There are other ways to make a stand for a hand-held circular saw with your own hands. Here are two more examples.

Table for hand-held circular saw with lifting mechanism

To change the depth of the cut, you can additionally install a lifting mechanism (elevator).

The lifting mechanism itself is mounted from a metal sheet that is attached to the frame on the machine. Lifting will take place along the guides by tightening the bolts.

One way is to install the adjusting rod with fixation nuts. Instead of rods, we use studs. The adjustment handle is made from a plate welded to the end of the stud. At a distance of 4–5 mm from the center we make holes for self-tapping screws. We weld a rod to the edge of the plate, which we will use to rotate the structure.

Conclusion

From the experience of many people, we can say that although such machines do not look very attractive, with the right and diligent approach, they are no worse than factory ones, such as Interskol, and have no less service life. The big advantage is that the cost of such a machine will be three times lower. In addition, you can make a machine “to suit yourself,” which will greatly increase labor productivity.

How to make a homemade one table For hand circular saw?

• making a table
• Assembling the front of the table
• Installation of the control unit

Owners of hand-held circular saws often think about improving this tool, because, with all its advantages, it cannot 100% replace a full-fledged circular saw. It is quite possible to convert a hand saw into a stationary one by making table For circular saw.

Disk saw necessary for precise longitudinal and transverse cutting of wood and metal.

There are many ways to correct the shortcomings of hand tools. One of them is buying a new one circular saw. But once you have become the owner hand circular saw, then your plans probably include its direct use. Then why don't you do it yourself? table especially for circular saw, with which you can turn your circular saw into a stationary machine. Well, as a result, in addition to the satisfaction of a job successfully done, you will have the planned result and experience in this industry. In the case when you already have one that is unsuitable for other use, but is still strong table(for any purpose) you can use it as a bed. But if there is nothing like this on the farm, then use the tips for creating a support table for your circular saw.

Selection of the required material and technology making a table

To make table For circular saw made of plywood, it must be treated with special means.

As a work surface, like best option, we recommend choosing Finnish plywood. There are a number of significant reasons for this. The material is laminated, which will ensure good sliding of the workpieces on the working surface of the table. In addition, the thickness of the material can support quite a lot of weight. These boards are moisture resistant and at the same time have all the properties of wood and are quite easy to process, which is very important.

To make a table, you can even use simple plywood 20 mm thick, but then it must be additionally treated with special compounds or later covered with a sheet of PCB or steel.

Read also

Simple boards with a thickness of at least 40 mm are suitable for making all drawers. And for the legs you can use not only wooden blocks or boards, but also profile pipes.

It is necessary to clarify before starting work that the use of a circular table will significantly reduce the cutting depth of the disk plate, just by the thickness of the table cover. Only if the saw has a larger disk will this not affect the work in any way.

Making the lid and sidewall

Installation hand circular saw V table, part 1/ Homemade table saw, part 1

The first part of the circular installation saws V table!! Do not judge strictly. Enjoy your viewing everyone)))) JOIN VSP GROUP.

Rework hand circular saw Interskol into a circular tabletop

Instagram General characteristics saws Interskol Type - disk.

Scheme of a homemade table for circular saw.

Before making a table for circular saw on our own Even at the stage of choosing its size, it is necessary to take into account the fact that the dimensions of the table must correspond to the dimensions of the workpieces with which you will work. That is, when working, they must be completely placed on the tabletop, since the accuracy with which you can then process them greatly depends on this. You can make one more improvement. Attach a jigsaw and a plane to the bottom of the same table; if you use these tools, you will provide yourself with a convenient multifunctional machine.

Assembling the front of the table

From the prepared sheet of plywood, following the preliminary calculations of the final dimensions of the table, cut out a rectangle and process its edges. And from below you can immediately apply markings for fastening. Place the circular saw against the inside of the lid, outline its outline, and then use a file to make a cutout corresponding to the outline. In cases where work is expected to be done with workpieces at different angles, this slot should be wider on top than on the back side.

If you really don’t have enough cutting depth, then you will immediately need to remove a few millimeters from the thickness of the tabletop.

Using a template for making a table.

Read also

Next, we make side chip boards, which serve to improve its support. In addition, you can conveniently place accessories on them that turn the saw on and off. They should be fixed at a distance of 5-10 cm from the edge of the tabletop. Taking this into account, measure and saw off 4 such boards. And fasten them with screws in the form of a board. On those edges that are adjacent to top cover table, and wood glue should be applied to the table top itself. Next, attach the drawers to the lid and secure them well until the glue dries completely.

Carefully choose the height of the table legs. After all, the height of the table will determine how convenient it will be for you to use. The legs are attached to the side bars, you can use screws or screws for this. Be sure to separate screws, nut heads or screws from the wood using special washers.

When planning a table, no detail should be left out, so you need to install a bounding box.

After you have carefully secured the table legs, they still need to be further strengthened, because the pressure that will certainly appear during work is incomparable to the load on an ordinary table. That is why there is an urgent need to install additional spacers at the table legs.

When planning a table, you should not miss a single detail, they are all important, so there is a need to install a bounding box. It is available on some models, but it is clearly not enough for working with large workpieces.

Select the length of the plank to be the same as the length of the table top. If it is convenient for you, you can allow it to move along the tabletop or firmly strengthen it with bolts. Such a limiter can be made either from a bar or from a metal corner.

A circular saw is a convenient and productive tool that is present in the workshop of every real man. If you work with lumber in large volumes, then for a circular saw you will need to make.

Of course, you can make an individual order from a furniture company. But you can build such a table on your own, if you have the necessary drawings, materials and tools.

Design The table consists of only two elements:

If desired, craftsmen can add the following to the product:

• drawers;
• racks.

Important: The circular saw is mounted under the table; only its blade is located on the tabletop. The hole for the saw should be slightly larger than the blade. This way, sawdust will not clog the mechanism.

Such a piece of furniture must be quite durable and reliable. Keep in mind, the greater the power of the saw, the higher the load on the table surface will be.

TO benefits a homemade table for a circular saw can also be added:

• comfort and ease of use;
• saving money;
• high labor productivity;
• the opportunity to make a product based on personal needs and the characteristics of the workshop.

Material

You can make a circulation table yourself from different materials. The most common are considered:

• or laminated chipboard;

Each individual option has its own advantages. Laminated chipboard, plywood and MDF are easy and simple to work with. In addition, these lumber are affordable. But products made from wood have higher strength and technical characteristics.

Attention: Before you begin assembling the product, all of it wooden elements treated with antiseptic compounds.

Drawing and dimensions

Before you start working, it is recommended to make a drawing of the product. On it indicate all the dimensions, materials of manufacture and other important information. You can make a high-quality drawing of any piece of furniture using special computer programs..

When making a drawing of the table, be sure to consider the size of the circular saw. Each brand of tool will have a specific size.

If you like to leave materials on the table during the work process, then The dimensions of the tabletop must be at least 120 by 120 cm.

Tools

To make a practical and comfortable table, you will need different tools and materials:

• lumber (plywood, chipboard, MDF and others);
• boards for legs;
• furniture glue;
• paints and varnishes;
• self-tapping screws;
• drill;
• milling cutter;
• electric jigsaw;
• circular saw;
• Ruler and pencil.

How to make a table for a manual circular saw?

The manufacture and assembly of a table for a circular saw is divided into certain stages:

Finishing

After manufacturing and assembling the circulation table, to simplify working moments, place it on the table it is advisable to mark. It is this that will make it easier to cut materials.

To extend the life of the product and increase its aesthetics, a hand-made table can be prime and varnish. These manipulations will also prevent the lumber from sliding on the surface and protect the product from increased moisture.

Safety in use

Keep in mind that working with a circular saw is dangerous. To avoid injury during the work process, it is necessary to constantly monitor the position of the saw table, its strength and stability.

Each time, before turning on the equipment, check how firmly it is secured in place.

Attention: Holding the cut material with your hands while the saw is running is strictly prohibited. Otherwise, your fingers may be damaged.

To prevent bouncing wood particles from getting into your eyes, work Wear safety glasses recommended.

Photo

Depending on what materials you used and how you solved the issue finishing, you might end up with something like this:

Useful video

We recommend watching the following video for a detailed description of the manufacturing process:

Conclusion

In conclusion, it is worth noting that making a table for a circular saw on your own is not so difficult. And its presence will significantly simplify and even expand the functionality of using the circular saw.

In contact with

When purchasing a circular saw, the future master does not always imagine the amount of work that he will have to perform with this equipment. This is one side of the problem. On the other hand, the master understands that it is better for him to immediately purchase a circular saw, but it is very difficult to choose a convenient table that would meet all the requirements.

A circular table allows you to make a more accurate and even cut.

Thus, the idea is born to make a table for a hand-held circular saw with your own hands. In this area, real craftsmen have no restrictions.

Read also:

For what work is it necessary?

About do-it-yourself blade for a walk-behind tractor.

General requirements for a table for a circular saw

A table for a working saw must meet several basic requirements:

• support rigidity;
• sustainability;
• evenness.

In addition to these requirements, there are several necessary conditions, which must be taken into account when creating a machine for a circular saw.

1. Safety and reliability of saw fastening.
2. Guarding for the saw blade, which very often remains unfulfilled.
3. Free access to the on and off button.

The additional set of functions of the devices depends on the requirements of the master himself and his qualifications. This set includes accessories that:

• help to perform an even longitudinal cut;
• same quality cross cut.

A standard table, which can be purchased along with a circular saw, is usually made from of stainless steel. The sawing device itself is mounted upside down; an incision or slot is made approximately in the middle to place the saw blade itself into it. Its width must correspond to the width of the saw blades used. This gap should not be allowed to be too wide. In this case, chips and other working debris will often clog the device, rendering it inoperable.

As for the technical parameters of the saw that will be used for machine sawing, its engine power may be greater than that of a conventional hand saw. But still do not exceed 1200 W; experts consider such a risk unjustified. After all, the more powerful the saw, the more durable and reliable the table is needed.

Industrial machines are made, as already mentioned, exclusively from metal, but their support is often filled with cement for more reliable fastening of the device.

Return to contents

Required material and table assembly for a hand-held circular saw

To make a table, you can take the following materials:

• plywood 20-50 mm thick;
• plexiglass;
• fiberglass slabs.

When choosing saws in a store, the buyer often pays attention to the immersion depth of the device, which means the maximum thickness of the material being processed. It must be assumed that using a hand saw for other purposes will remove approximately 1 cm of the cutting thickness.

Table parameters largely depend on the surfaces being processed.

If the products are expected to be bulky, for example, more than 2.5 m long, then the table will have to be strengthened with additional legs.

The circular table has several features in its assembly. The blank for the table top must be described in a separate paragraph.

So, the legs for the tabletop are made from the same plywood, but of greater thickness. To secure it, clamps are made along the table or crosswise. This will allow the table to be more rigid. The stability will be affected by the correctly selected length of the legs and installation location.

The table can have different sizes; the master determines these parameters independently. For example:

• cover 70x80 cm;
• height 110 cm.

Return to contents

Table cover: how many useful things can it have?

For the saw itself, depending on the selected thickness of the table top, a cut is made with a depth of about 1 cm. The cut is made to secure the working table of the device itself around the perimeter. In order to make it, using a ruler, a simple pencil and the handsaw itself, mark the place where the device will be located.

There are several options for attaching the saw to the table. It all depends on what goal is set. If a person wants the saw to be freely dismantled if necessary, the mount must allow this, but at the same time be reliable.

To do this, limit bars with grooves are installed around the marked perimeter of the working surface of the saw, without forming a closed frame. This secures the hand saw. But this installation is applicable for small volumes of work and low disk speeds.

A more reliable fastening looks similar, but with this fastening the bars have smaller size: there are not 4 of them, but 6 or 8, each is fixed near a specific section of the frame, and if necessary, the master will have to unscrew the bolts near each such block. Some attach the circular without wooden beams, screwing it directly to the table, making holes in the frame.

Turning the table cover over, you can see a slot with a saw blade sticking out of it. During installation, the disc platform locking function is used.

You can make a slot on the sawing table for a removable riving knife, which will be attached with a clamp next to the saw on the underside.

Return to contents

Guides for longitudinal and transverse cuts

The table must have guides; aluminum construction U-shaped slats are used for their manufacture. With the open edge they cling to the table. Subsequently, auxiliary fastening parts will move along them, allowing more precise cuts to be made.

The first to be built-in is a guide running along the saw. The parallel rails will run along the edges of the table, perpendicular to the saw itself. The guides themselves are also made of plywood.

Return to contents

How to make cross cuts?

To make cross cuts, a plank is most often used, which is similar to small table. It is upside down, has 2 parallel bases and a slot through which the saw blade can pass. If all angles have been observed, the cut will be strictly perpendicular.

Another interesting option could be a solution for the transverse sawing direction. The bars are attached to the plywood (slightly larger than the table) from the bottom side. They should be positioned clearly across the width of the table. 2 parallel plates are attached to the top of the board, which are higher than the saw blade and have slots for its passage. The result is the same, but this solution is easier to implement.

In addition, the table top can be equipped with rulers along both guides.

A circular saw is used to cut wood lengthwise. Its cutting base is a disc-shaped plane with a jagged outer edge. Such saws are not only hand-held, but also fixed on a table. How to make a universal table for a circular saw so that this cutting tool can be installed on it? Below are several ways to make a table for a circular saw with your own hands.

DIY table for a circular saw

How to make a table for a circular table from chipboard? To make such a table for a circular table, you need:

• sheet of laminated plywood 9-11 mm thick (800x800 mm);
• 4 sheets of chipboard 16 mm thick (400x784 mm);
• several bars 40x40 mm;
• several bolts and screws;
• aluminum cornice.

On such a table you can attach any hand-held circular saw with a large blade. Drawings of a table for a circular table of this type can be easily found on the Internet.

This saw is manufactured in several stages:

Guides for a circular saw are made of timber or aluminum cornice.

The second version of the table for a circular table. Photo of manufacturing technology

A do-it-yourself saw table is made from boards, as the most affordable material, quite often. To make this table you will need:

• plywood sheet (thickness 20 mm and above);
• boards 50 by 100 mm;
• bars 50 by 50 mm;
• several screws;
• wood glue;
• one of the types of wood varnish.

A blank with a hole is cut out of a plywood sheet using a jigsaw - a tabletop in which the saw will be placed. When marking the holes, follow the dimensions of the saw blade. Stiffening ribs are made from the boards, which will be attached to the tabletop with self-tapping screws. During the fastening process, the boards are tightened using clamps. A start button is later installed on the front stiffener. To make the legs, use boards about a meter long. They are attached externally to the stiffeners with bolts.

Video of a circular table made from a hand-held circular saw

Examples of finished tables for a circular saw

Making a table for a circular table with your own hands is not always advisable. It can be bulky and awkward and difficult to adapt to precision wood cutting. Therefore, if you don’t mind spending a certain amount of financial resources, it is better to purchase factory-made tables. They are made of durable and easy-to-use materials, safe when turned on electric current, and also have a factory warranty in case of breakdown.

The Jet JBTS-10 circular saw has a retractable table on each side, increasing the area suitable for work. Thanks to the belt wire, the cut is noiseless, and the service life of the electric motor is also increased. The presence of an eccentric clamp prevents the machine from moving during operation, which makes its use convenient in any conditions.

Using table saw Caliber EPN-1100 there is a possibility to saw wooden materials in the longitudinal and transverse direction, as well as at different angles. The level of saw inclination can be selected and fixed.

The Enkor Corvette-10M 90101 sawing machine uses side and parallel stops, which greatly simplifies the work. The saw blade can be tilted at an angle of up to forty-five degrees when cutting. An industrial vacuum cleaner can be connected to the machine to remove wood dust. At the same time, the device is characterized by lightness and small dimensions.

The use of a stationary circular saw Einhell TC(TH)-TS 820 allows you to work with lumber in mass production conditions. It is a suitable tool for processing not only wooden, but also fiberboard workpieces. The design of this model provides a hole into which devices that perform wet and dry cleaning of the machine are connected. Moreover, the equipment is so compact that it can be installed on any workbench.