R studio description. Recovering files in R-Studio

Every person who has any digital technology faces this problem - losing files. And, by the way, it doesn’t matter at all what is lost: a unique home photo, a favorite recording, a video clip downloaded from the Internet, an unfinished dissertation. No one will rejoice at such an event. What to do now? Experts recommend using one of the special programs. We will now figure out how to use R-Studio, one of the applications for recovering lost files.

general information

Regardless of the method of data loss, the manufacturers of this utility guarantee a high chance of saving your information. This does not apply only to cases where the carrier has received physical damage. Users, of course, have tried many different programs for file recovery, but judging by their reviews, R-Studio is one of the best, and it is also completely understandable to use for the most inexperienced user. During some experiments, only she coped with the task 100%.

Before we move on to talking about how to use R-Studio, you need to pay attention to two ironclad rules that you need to clearly understand before starting to work with any restorative product:

1. Under no circumstances should you save the information you are recovering to the same section of the media, or even to the media itself. Do not perform any operations related to writing to it.
2. If you are not confident in your ability to complete this work, it is better not to start it, but contact specialists. It may happen that they will no longer be able to help. In such situations, one does not learn from one's own mistakes.

R-Studio demo mode

In order for the user to experience all the capabilities of this program, he has a chance to work with the demo mode of R-Studio. The only difference from the full one is the limitation in the size of the restored file. The demo mode of this utility allows you to test and verify all the capabilities of R-Studio. This version can be registered absolutely at any time and at any stage during the operation of the program. To do this, you just need to buy an activation key for R-Studio and enter it in the specially designated field.

So, download the application for free, install it and launch it. After scanning and detecting lost information, you can immediately restore those files that are no larger than 256 KB in size. The rest can be viewed and the possibility of returning them back to the owner can be assessed. If you do not know how to use R-Studio, please read the User Guide first. If you are satisfied with its performance, you can immediately register the utility and continue recovering files of any size.

Getting started with R-Studio

And now, finally, let's start talking about how to use R-Studio. Having launched the program, we will see the main window in front of us, where we will see all the drives available in the system. Not only hard drives are supported, but also floppy disks, CDs, DVDs, USB flash drives, various flash cards, and some exotic media types. All this is conveniently located in a form reminiscent of a standard conductor. You can see all the necessary characteristics and parameters of the media.

If the files were simply deleted, and the system itself was not damaged, then you can restore them by opening required disk. As in Explorer, you will see: on the left side there is a standard directory tree, and on the right side there is a regular list of files. Those that have been removed are recognizable by the icon with a red cross in the list.

Continue file recovery

Keep in mind that some files may not be recoverable, no matter how well you understand how to use R-Studio. This depends on whether any other information was written to the same location. Let's continue further. Using the checkboxes, select the files we need to restore. Then click on the “Restore marked” button and specify the path to save.

If you are a very advanced user, you can select by mask and other attributes, such as creation date, name or size. If the file system is damaged or modified, the recovery process will be a little more difficult and much longer. A scanning operation will be added, which can last several hours. During it, the original location of the searched files is established and the ability to read them is checked. Often this is successful, but with the loss of the name. Many file types are supported.

Completing the scan

Once the scan is completed sooner or later, the user will be able to see a list of partitions that were recognized. The color coding shows whether there is a correct boot record and the same fragments in the media section. From this you can already see the possibility of recovering information. The R-Studio program, in addition to the basic functionality already described, performs some highly specialized tasks, for example creating a media image. This will be very useful for subsequent recovery, since it happens that information disappears right before your eyes when analyzing a directory.

This may be caused by viruses or bad sectors. Even a long-term scan, not to mention recovery, such media may simply not withstand. This is where a bitwise copy comes in handy. R-Studio also recovers information from partitions combined into a RAID array, which are automatically recognized and accessible as regular hard drives.

Final part

This program has a large number of different configurations. Some of them have additional functionality that is completely unnecessary for home use, but for a system administrator of a large company this is exactly what is needed. And their prices are different, so why overpay for extra bells and whistles? When you purchased R-Studio, the instructions will help you understand all the nuances of the utility.

There are separate versions that allow you to restore information even within any local network. But, regardless of the functionality, all deliveries include R-Studio Emergency - an application that works from a set of floppy disks or a CD, which is extremely necessary when the operating system cannot be started. Before deciding whether to buy a license or not, read the reviews. They are mostly positive. Users were often able to recover even those files that they had already said goodbye to. There are two disadvantages: weak capabilities in the demo version and the length of the scanning process when searching for files. Sometimes, according to reviews, it took up to three days. But the results that you get are worth it. So the choice is yours.

Is one of best programs to recover lost data. First, you need to scan the contents of all data in a specific partition where the file was previously located.
To do this, you need to launch the program, select a hard drive partition and click on the “Show disk contents” menu.

The program will launch an analysis and a dialog box displaying the speed, status and number of hits.

After a successful check, the program will display all the content that was previously located at the specified path in the selected section. The red cross marks those files and folders that have been deleted. To restore them, you need to check the box next to the item that needs to be restored and click on “Restore marked data”.

In the new dialog box that appears, you must specify the recovery parameters, the location where the files will be restored, and apply the operation.

If a file or folder was not found when analyzing a disk partition, the structure of the deleted file has been damaged and now it is necessary to resort to more thorough scanning and recovery using signatures.
Select the section again, and in this case click on the “Scan” button.

In the window that appears, you need to specify the scanning parameters, after which you can begin the process itself. The program will automatically indicate the required values, but if necessary, they can be replaced.

The scanning process takes some time, as proofreading is carried out by blocks and sectors.

After the scan is completed, you need to go to the “Found by signatures” section.

The program will display all files in separate folders, sorted by file type.

Now you need to select the files that need to be installed and click on the “Recover marked files” button.

Also, using the program, you can not only recover files, but also carry out various other procedures that relate to hard drives. For example, you can edit the properties of NTFS files.
Select the file and open the context menu, where we select “Editor”.

In the binary data editor, you can change various properties and values, but this requires special knowledge and skills.

In order to quickly and efficiently restore the system, you can create a recovery image. This function can be applied both to individual directories and to entire disk partitions for subsequent backup.
To create an image, select the required disk or partition and select “Create image” in the context menu.

In the parameters window, we specify all the necessary data, including the file name, path for the created image, speed, and so on. Then we apply the operation.

Previously, on my blog, I already published a lesson about a free program for recovering data from a hard drive and other storage media - . Today we will talk about its paid and more powerful analogue - R-Studio program.

R-Studio is more than a recovery program. The capabilities of this utility are much wider. It is capable of recovering not only deleted files, but also any damaged information, even entire partitions as a result, for example:

• computer malfunction
• disk sector damage
• disk formatting
• after a virus attack
• after MBR destruction
• after a failure or incorrect operation of other disk utilities
• when the disk partition structure is damaged, which, by the way, I personally recently had to deal with. And I want to note that this program coped with its task very well. Actually, this incident prompted me to find and publish a video tutorial on R-Studio.

There are two main versions of R-Studio programs: for data recovery on local drives, and over a network. There are also different variations of these versions for different file systems and the specifics of a particular task.

It should be noted that the R-Studio program can recover data from almost any storage media, namely:

R-Studio features:

• support for 64 and 32 bit operating systems (Windows)
• support for file systems FAT12/16/32, NTFS/NTFS5 and others (for Linux, Macintosh)
• support for dynamic GPT and MBR partitions
• RAID 6 support (including Reed-Solomon and Vertical XOR)
• reconstruction of damaged disk arrays
• creating an HDD image file, a separate partition or part thereof, divided into several files for recording on a CD, Flash or network drive (network version)
• byte-by-byte disk copy
• ability to view and edit recovered data in the built-in editor.

Advantages of the R-Studio program:

• easy tracking of the data recovery process
• flexibility in setting program parameters
• filter found data by: disk structure / extension / creation date / modification date / last access time
• understanding file and directory names in Cyrillic
• saving long names and directory structure
• intuitive interface (like Windows Explorer)
• Russian language support.

Now let's go directly to the video tutorial, from which you will learn:

• how to use R-Studio (absolutely all functions will not be considered)
• familiarization with the interface
• how to view service information about a disk and why it might be needed
• how to view the contents of the storage medium
• how to filter data to find the files you need
• Why do you need a log of your actions in the program and how to view it
• what is not recommended to do if you are not a professional
• what to do if, when viewing the contents of the disk, the program does not see the necessary files
• recovery settings overview
• One important point in the settings when recovering data.

Video tutorial: R-Studio - how to use the program

Most likely you came to this page because you need to recover data lost as a result of some incident with your computer. Sometimes such recovery can be a very complex task that only data recovery specialists can handle, but most cases fit well into the typical data recovery scenarios that we have included in the list below. All you need to do is select the most suitable case from this list and get detailed instructions on how to get your data back specifically in your case. However, before proceeding, we recommend that you read our general tips for data recovery.

General tips:

1. First and most important: Stay calm, don't rush, and don't make the situation worse. Do not allow any further changes to the data to occur on the storage device that contained the lost data.

2. Learn more about data recovery. We recommend reading our article. You will understand how data recovery works and what to expect from it in your case.

3. Analyze the affected disk. You should not work with disks with damaged hardware. Signs that your hard drive has hardware problems:

• The hard drive is not recognized by the operating system or is recognized under some unusual name.
• The operation of the hard drive is accompanied by atypical sounds, clicks, and it works very slowly.
• Bad sectors constantly appear on the hard drive.
• Assessment programs hard state SMART disk displays messages about significant malfunctions of its hardware. To do this, you can use our data recovery programs.

Attention! If you think that your computer's hard drive is faulty, then use the R-Studio Emergency utility only to create an image of it. DO NOT TAKE ANY ACTION WITH THE DISK YOURSELF! Do not attempt to start the scanning or file recovery process. Do not try to use any other data recovery software. Remember that any incorrect actions with such a disk will likely cause even more data damage. It is best to use the services of data recovery laboratory specialists, otherwise you risk, at best, incurring even greater financial costs, and at worst, permanently losing your files. Take the disc to specialists: they have special equipment and, most importantly, the necessary level of knowledge to work with such discs.

5. Prepare enough space to save the recovered files and, if necessary, images. Never try to save recovered files on the drives on which they were located.

6. Last but not least, do not buy any data recovery software until you are sure that it can recover the files in your case. All normal data recovery programs allow you to work in demo mode so that you can find lost files and evaluate the chances of their successful recovery. Please note that even if the program shows the correct file structure, this does not guarantee that the files can be successfully recovered. Only those files that are successfully displayed in the viewer can be successfully restored.

Typical data recovery cases:

Problems with computer programs . Signs that computer hardware is working normally, and the problem is damaged system programs: the computer turns on, the boot procedure begins, it starts to boot operating system, but then the download stops and the computer either freezes or goes into reboot. Signs that the computer"s hardware works normally and the problem is in faulty system software:
. How to recover files from a Windows or Linux computer that won't boot.
. How to recover files from a Macintosh that won't boot.
. How to recover files from a non-booting computer over the network.
Problems with computer hardware. Signs that your computer won't start due to faulty hardware: the computer won't turn on, you hear unusual beeps when you turn it on, the boot procedure ends suddenly, the computer gives warnings about faulty components in the computer, etc.

R-Studio how to use right, so as not to complicate the probably already difficult situation in which you find yourself.
Please listen to a short course by a young soldier on working with such programs, without this you can make a lot of mistakes and instead of getting your deleted data back, you will overwrite it even worse.

R-Studio how to use

The first mistake is excitement, which is accompanied by the ensuing consequences, for example, rash actions, calm down, read the article to the end, calmly think about everything, and then act. By the way, if you accidentally deleted photos from your hard drive, then we have a very simple article that I am sure will help you. You may also find this article useful: How to recover deleted files free programs, and and paid - , .

When you and I, my dears, accidentally delete a file, without which our further existence on planet Earth will not be joyful for us, know that it is not physically deleted from the hard drive, but you can lose it forever by writing any information over it. Therefore, even if you read how to use R-Studio, but you don’t have any experience as such, we immediately turn off the computer and preferably in an emergency. We do not perform any further actions with your hard drive, then our chances of successful success increase.

• Note: Many times people have contacted me with similar problems and could not remember what actions they took before contacting technical service. They couldn’t even really name the exact name of the program they were trying to save their data with, and most importantly, after deleting their files, for example, past the recycle bin, they actively used the computer (sometimes for several days), which is absolutely forbidden to do, only then they still went to the service and demanded a miracle.

After we turn off the computer, we take the system unit and go to the professionals, 90% of your data will be saved, naturally they will take a little money from you, it’s better to find out how much right away, but if they ask for a lot of money, read on.

Now I am writing this article, and in front of me there is a system unit, it contains HDD, it was accidentally formatted, that is, everything that was on it was deleted, let's try to recover lost files from using R-Studio, and at the same time we will learn how to use this good program.
First of all, you and I need to evacuate the victim, in other words, remove the formatted hard drive and connect it to my computer, I always do this, because it is impossible to save the recovered information on the same media from which the files were deleted.

If this is difficult for you, then at least do not restore the files to the partition of the hard drive from which they were deleted.

Note: Friends, the most important rule when recovering information is: the number of calls to hard drive with deleted data should be kept to a minimum. This means that before working with R-Studio, it is advisable to make an image of the hard drive with lost data and restore information from the image. How to make a sector-by-sector image of a hard drive and recover information from it is written in.

So let's start, on our hard drive that suffered from formatting, a lot of folders with family photos and videos have disappeared, we need to get them back.

Let's launch R-Studio, the program has an intuitive English-language interface, but we are no strangers to it, I am sure that after using it once, you will remember it forever.
The main window of the Device View program "Disk View" on the left side shows almost all the drives in the system: hard drives divided into logical partitions, USB drives, DVDs, flash cards, the right window provides complete information about the drive we have selected , starting with the name and ending with the size of the clusters.

Select our drive (N:) and click Open Drive Files,

Now we are using the easiest way to recover deleted files, several folders with a tree structure open in front of us, we open everything starting from the first, I warn you, do not expect the usual names of your files, in our case Photo of your son, etc. We can say we were lucky, there are folders crossed out in the window

red cross, this means they were deleted, look at the names: Chapter 01, 02, etc., these are the folders we need with lectures by a University professor, the fact is that before such recovery operations, I carefully ask people about the names of deleted files and their extensions , this is needed in special advanced cases for searching by mask, etc. You don’t have to bother yourself the first time, at the end of the article we will use the advanced scanning method (Scan) and restore everything that was on the hard drive, this will of course take time compared to in a simple way ten times more. Now check the boxes everywhere and then Recover,

select where to restore, by default to the personal R-Studio folder in My Documents and the offer to change the default recovery settings, leave everything as is, click OK.

File recovery process in progress

A window may appear, the contents of which I translated for you in Photoshop, I think nothing will happen to me for this, a window with a warning that any of the files being restored has the hidden attribute, R-Studio will offer to remove this attribute from all such files, we agree, set check the box where necessary and Continue.

After the restoration process is completed, go to the My Documents folder, then the personal folder R-Studio, it’s called R-TT and look at the result, folders with the very necessary video Chapter 01, 02 were restored, as well as several folders with personal photos, not bad anymore , but we are not satisfied with this result.

Complete search and recovery of deleted files

To search and recover other deleted data, we will use the full disk scan (Scan) function.

In this window, check the Search box known types files, and select Detailed scanning and click Scan.

Let's be patient, the operation is quite lengthy, in the right window in the form of multi-colored squares, the progress of the process is displayed, at the moment only 13% have been scanned.

We are waiting, almost half of the hard drive space has been scanned 43%

At 55% my patience is over, since almost an hour has passed, and I stop the process, click on Stop

In the program window below, you can see the file systems recognized by the program and, accordingly, information or data that can be restored.
Recognized 0 or Recognized 1, Recognized 2 – marked in green, this contains data that can be recovered almost 100%.
Extra Found Files – marked in yellow and red, data that the program could not recognize and compare with any file system, it will most likely not be possible to restore them, and if anything is restored, it will be unreadable. In order to extract information from such files, you need a hex editor, but this is another topic that requires not one, but several large articles.
Recognized 0, marked in yellow, also has little chance of recovery.