DIY metal wire products are masterpieces. Original and useful DIY metal crafts

Decorate the interior of your home or country house You can buy not only purchased accessories, but also metal products that you make yourself. Anyone can do this, as it requires a minimum set of knowledge and tools. Such things can decorate any interior.

When thinking about creating such items, everyone has the opportunity to choose a production technology for themselves, focusing on their knowledge and experience. In each case, the selected equipment will involve certain costs necessary for the manufacture or acquisition of special equipment. Everyone has the power to produce a lot of different metal products and decorate a room or garden with them. It can be different decorative elements or forged bridges, as well as crafts or pieces of furniture.

Manufacturing technology

Manufacturing metal products is a very popular way of earning money today. DIY metal objects can make any design more attractive. These may include:

• cornices;
• benches;
• pieces of furniture.

Moreover, the master can choose the style at will, turning Special attention to ensure that the thing being done looks harmonious in any room. In retail outlets, metal products are offered at fairly high prices, due to the fact that they are made manually. However, if you wish, it becomes possible to master the science of creating such objects on your own. Metal products, firstly, are highly valued in certain markets, and secondly, you can save decent amounts. The only costs incurred may be related to the purchase of materials.

To produce steel parts and patterns, you can choose any technique you like. Quite popular among them are:

• filigree;
• cutting;
• bending;
• forging;
• stamping;
• coinage.

After the following have been prepared: a drawing or diagram of the product, necessary materials, the master will be ready to implement the plan of creating a beautiful and unusual product.

Metal is the material on the basis of which it becomes possible to create a whole composition of all kinds of crafts for the home or garden. For this reason, many methods have been developed that allow you to create very original things at home.

Methods for creating metal products

1. Casting. The essence of the presented technique is that a liquid alloy fills a special mold. As the material hardens, it turns into a super-strong and beautiful thing or subject.
2. Forging. This method is based on the impact on a pre-prepared workpiece different ways: hammer, temperature, press and other deformation methods.
3. Bending. This technique is in many ways identical to forging, only it is based on welding and riveting of structural elements.
4. Difovka. This method is characterized by the use of a hammer, with the help of which thin iron sheets are given the required shape.
5. Cutting and stamping. Using this technique, you can without any special effort transform the shape of the workpiece, as well as make holes.
6. Filigree. The presented method involves the use of smooth or cast wire as a raw material, from which the product is made by soldering the bent components of the pattern.
7. Coinage. This processing method is characterized by simplicity of implementation, and its essence consists in placing a special tool on the workpiece, which must be impacted with a hammer. Thus, the shape of the product changes.

How to make a drawing

There are several ways to make a drawing for metal products. You can create it yourself or using special computer programs.

Using a drawing, you can determine in advance how much material will be needed to make things. First of all, you can’t do without it when making large objects, for example, grilles or gates. Having a ready-made sketch, it will be easier for the master to determine, even before starting work, the harmonious presence of the resulting product in the chosen location.

Making simple metal objects

If you do not have experience in making this kind of thing with your own hands, it is recommended that you start in this matter by creating the simplest metal objects that anyone can handle. A metal box can serve as an educational product. It can be used not only as a decorative element, but also for storing small items.

Necessary tools for work

An ordinary tin can can be used as a basis for creating a metal box. To make the box you will need the following equipment and things:

• Sandpaper.
• Scissors.
• Ruler.
• pencil and pen.
• A solid base that will be used as a working plane.
• Paper that will serve as the basis for creating a drawing.

The process of making a box begins with cleaning the outside of the jar from paint and labels, using sandpaper for this. It is recommended to perform the operation with a filled jar. Otherwise, such preparation must be carried out extremely carefully, since the metal can easily deform.

• Cut off the bottom, then cut along the top. During this operation, unevenness is sure to form along the edges, which must be sanded immediately.
• Next, the jar needs to be placed on a hard surface. At this stage of work, you can begin to draw images with a pencil that were previously drawn in the drawing.

Then they proceed directly to creating the ornament.

The master has no prohibitions or any restrictions in choosing decorations for the box, but it is still better to use symmetrical details.

To create the pattern you will need ball pen, with which you can push through the aluminum layer. You can achieve the effect of a vividly expressed texture if you trace the outline of the pattern several times with a pen. Having done all the specified work, the master will only have to assemble all the parts of the box together.

If you have welding equipment, as well as the necessary skills to work with it, you can always make not only various objects, but also crafts. For example, a very beautiful metal owl.

To create it you need to prepare the following tools:

• paper;
• pencil;
• grinder;
• hammer;
• thin metal;
• cardboard;
• scissors;
• chisel;
• welding equipment;
• bolts and washers;
• steel wire or rods.

At the first stage, you should draw a sketch of the owl on paper, after which it is repeated on cardboard. Thus, the process of cutting out individual components of the craft is greatly simplified. To make a metal owl, you will have to make the eyes, body, feathers, tail and wings in advance. To make it easier to cut metal parts, it is recommended to use a grinder.

When forming the eyes for the owl, you should make sure that large holes are made in them into which bolts can be mounted. The craftsman needs to make notches on each scale, which will ensure the effect of real, living plumage. To achieve this result, the master will have to use a chisel.

The legs can be made by connecting parts of metal rods to each other, using welding for this purpose. To create the beak, a piece of bent metal is used.

The legs and beak should be welded at the very end of the product assembly stage. When all the details are in place, the owl can be further decorated by treating it with a special varnish.

How to make frosty patterns from metal

Creating frost patterns is not a very time-consuming procedure, but at the same time it can make a metal product match the ancient products of masters.

This is facilitated by the appearance of the tin structure, which looks like crystals. To make frosty patterns, you will need cans, since there is already a layer of tin on their surface.

You can complete the drawing in the following way.

You will need a candle, over which you need to hold individual parts of the metal for a while. The can must be heated for a strictly defined time. If it is not maintained and heated longer, this will lead to damage to the product. The main goal to achieve when heating the tin layer is to allow it to develop.

A frosty metal pattern can be made by first placing tin on the plane of a steel plate, and then melting or heating it. A torch is suitable for this task: due to the stable flame, you can easily heat the desired area of ​​tin. As the tin heats up, you can notice how a shine appears on it, which disappears after a few seconds.

You need to try to process the metal sheet so that its areas are heated unevenly, because otherwise, you may end up with a monotonous and uninteresting pattern.

To give the workpiece an original look and make a unique pattern, you need to heat the sheet at the corners. When the desired pattern is obtained, it is necessary to quickly reduce the temperature of the metal sheet. To do this, you need to dip it in cold water or spray.

In order for the resulting pattern to be as clearly visible on the sheet as possible, its surface can be additionally treated with hydrochloric acid. It is important to follow safety precautions here. Prepare a tool in advance - a stick to which a cotton swab is tied. Often, after heating the metal, the craftsman is unable to achieve the required gap.

In this case, you can remove it with sandpaper. It is important to note that this procedure can only be done once. You should not repeat this technique, as this can lead to complete removal of the tin layer.

Wax paints can be used for decoration. They need to treat certain areas of the metal sheet, after which they should be heated. You can fix the pattern created on the can by coating it with a special varnish. It will be even better if you apply a colored clear varnish on top. The finished item will look even more original.

You can decorate your home not only with modern fashion accessories and beautiful little things that are found in a wide range in stores. If you wish, you can make metal things and objects with your own hands that will look no worse than ready-made ones. Of course, in the absence of skills in making such products, it is possible that the first owl, box or other thing made with your own hands will not be so beautiful.

However, as you hone your skills, even a novice master will find it increasingly easier to cope with this task, and after a while it will not be difficult at all to create more complex things. This will allow you to turn your hobby into a fairly profitable occupation. After all, the metal products on display, created with your own hands, are very highly valued.

The decoration of any cottage or mansion in the suburbs can be not only a purchased accessory, but also metal crafts made by hand. Any person can make them, since no special knowledge is required.

When thinking about making metal crafts, everyone is given the chance to choose the desired production process, relying on their own skills and experience. The chosen work technique will always imply certain expenses necessary to create or purchase the necessary equipment.

Everyone can create many different metal crafts and, thanks to them, transform the interior of a home or garden.

Product technology

Creating crafts from wood and metal today is considered in a modern way to earn money. Metal structures made by hand decorate the cornices and benches. In this case, the master has the right to choose the desired style that is suitable in the house.

In stores, metal objects are sold at a high price, because they are made by hand. Therefore, today it is important to create such products yourself.

For the production of metal parts and patterned images, it is recommended to choose a suitable working process.

The most modern are considered to be: filigree, cutting, bending, forging, stamping, embossing. Upon completion of the drawing metal product and the required list of materials, the master can begin work.

Metal is the material from which entire compositions of various crafts for home and garden are created. In this regard, many ways have been developed to make it possible to create characteristic things at home.

Methods for creating metal products

Casting. The essence is to fill the mold with liquefied steel. Once frozen, it becomes durable. This makes a beautiful uniform product.

Forging. Based on exerting an action on the workpiece using a hammer, temperature regime, press, etc.

Bending. This technique is similar to forging. The essence of the technique is welding and riveting of elements.

Difovka. This method is characterized by the use of a hammer. This is how the iron sheets acquire the desired appearance.

Cutting and stamping. Using this technology, the shaped appearance of the workpiece changes and holes are made.

Filigree. The raw material is wire of any shape. The craft is created by soldering the bent components of the pattern.

Coinage. The method is considered the simplest. Its essence is the location of the equipment on the workpiece, subject to further impact with a hammer. This changes the shape of the product.

How to make a drawing

Nowadays, many methods are used to make drawings of metal crafts. You can actually do them yourself, or using automated programs.

Thanks to the diagram, there is a specific understanding of how much material is needed for the work. Initially, it will be needed when making large items, for example metal gates. Having a prepared sketch, the master will be able to understand whether the craft will look harmonious in the desired location.

DIY metal rose

To decorate the garden in a country house, crafts from sheet metal. Among them, most often distinguished beautiful flower called rose. The completed product will be able to please you for many years.

To complete the craft, the following teaching method will be useful:

When carrying out work, it is necessary to take into account safety precautions, using special gloves and a mask for welding work.

Take sheet metal and cut out flower petals and leaves from it. The petals should be cut in the following order: from smallest to largest, starting at 15 mm and ending at 80 mm. You will need to make about 30 petals. This way the flower bud will look compact and beautiful. Afterwards, the edges of all petals should be smoothed with a sharpening stone.

From the remaining sheet metal it is necessary to cut triangular shapes of at least 10 mm in size, which serve as rose thorns.

Making a bud. Take the two smallest petals, squeeze them in a yew, then fold them into two parts. Then we form eight petals in an arc, keeping to the middle of the bud. Each detail of a metal craft is fixed by welding. After this, you need to do a cleanup.

All other leaves are formed in a similar way along an arc, but with the top bent. The bend is carried out with a hammer. All other petals are fixed by welding and cleaned again.

It's time to weld the thorns to the prepared stem. Afterwards the cleaning is done.

And finally, the rose leaves themselves. You need to clamp and unclench the leaf in a yew so that the vein comes out. The edges of the leaves are bent with pliers. We fix the leaves to the stem by welding and clean the seams.

The final stage is welding the bud to the stem. Cleaning is also done in those places where the parts are connected. Afterwards, the entire rose is painted with a special paint.

DIY metal rat craft

Metal crafts for the garden and dacha have excellent appearance. For example, you can do it by following step by step instructions metal rat or other animal.

Step-by-step process of creating crafts:

Take a couple of pieces metal pipe(with a rat size of 50 cm). One of them will serve as a head: we cut equal parts in diameter, and the workpiece comes out.

Then, using electric welding, we attach the parts and use a grinder to clean the seam area. When working, you should take into account the proportional dimensions: the head is larger than the body. We weld these two parts together.

On a thin metal sheet 2 mm wide we apply samples of the animal’s ears and paws, then cut them out. For the correct shape of the legs, the workpieces are rolled up in the form of a funnel. We use a welding machine to connect the legs to the body and clean the seams. Work with the ears is done in a similar way.

Afterwards we make the paw hands from twigs. Rods will fit on the upper and lower legs smaller size. We weld them and clean them.

To make the tail you will need a rod 14 mm long. It is attached to the rat's body by welding.

Now let's take care of the muzzle. Initially, two openings are made in the head for the eye sockets. They are smaller in size than ball bearings.

We carefully clean the entire animal with an angle grinder. We make welding lines along the length of the rat, located nearby. This will resemble elements of wool.

Finally, a non-colored varnish is applied to the rat to obtain the best effect. In the photo of a metal craft, the animal is coated with a colorless varnish that has a shiny effect. Now the craft is ready, you can give it to your loved ones, or place it at your own dacha.

Photos of metal crafts

Every owner spends a lot of time thinking about how to decorate their home. Today there is a huge choice of materials - wood or plastic, but in the first place is metal - one of the durable, strong, resistant materials in the world, serving as an example and standard of metaphors.

History of origin

Metal products became most popular in Europe in the 11th century. Everywhere, facades of buildings, fences, and decorative statues began to be decorated with unusual forging, and the profession of a blacksmith became an honorable and famous figure in the early Middle Ages.

What kind of craft can be made from metal?

Having thought carefully, the owner decides to present a piece of the unusual to his home, but the question immediately arises: should he buy it or make it himself? Of course, do it yourself, because doing something with your own hands is much more pleasant and more profitable from a price point of view.

Today, forged ornaments for grilles, doors or fences are in fashion; forged animals, a mysterious owl, or a Russian bear also look great in the garden. Ladies prefer forged bouquets, and a rose created with their own hands will surprise anyone.

What do you need to make metal crafts?

There are not as many tools as it seems, all you need is the following list:

• Photo of a craft you like;
• Paper;
• Welding machine;
• Chisel and hammer;
• Grinder for cutting metal;
• Special rust solvent;
• Pencil and scissors, when using a stencil;
• Several washers or bolts for decorative elements;
• Steel rods, from a few centimeters to a meter.
• The basis of creation is sheet iron.

Step-by-step DIY crafts

An original idea for a metal craft would be an owl. First, for aesthetics you will need a template or stencil. It can be made from a sheet of paper with drawings printed on it.

After cutting out the owl drawing, the stencil should be applied to a sheet of steel and the drawing should be transferred; it should be done in the most realistic way.

The next step is to trim the metal with a grinder and drill holes for mounting and inserting the owl's eyes. After creating the body, you should move on to the details: the legs are made from a rod, and the irregularities are smoothed out with a grinder. At the end our beauty is processed chemical agent from rust and paint.

Master class on making roses

And materials. List of basic tools:

• Welder.
• Hammer and pliers.
• Sheet steel
• Bulgarian.
• Special paint for metal.
• Grindstone.
• Steel wire with a diameter of 6 mm.
• Metal scissors.

Attention. Do not forget about safety precautions when working with these tools! Be sure to wear gloves and a welding mask when working.

We take metal cutting scissors and cut out thirty rose petals (thirty petals will make the bud seem more magnificent). You need to move in cutting from small to large, that is, from 15 mm to 80 mm. Your rose should not be prickly. Therefore, a sharpening stone will help smooth out all the unevenness of the petals.

After forming a complete flower, we weld the spikes and clean off the excess with a grinder, clean the seams and cover with a layer of protective paint - the craft is ready.

Metal products with steel wire

The British National Academy of Sciences declared in 1856: “Everything that can be invented has long since been invented,” but time has shown a different outcome. So it is now. Every year new ways of decorating are invented.

For example in last years It is fashionable to make a figure from wire or rod. Combinations and special weaves create an impression of indescribable beauty.

Master class - butterfly made of twig

In terms of its complexity, a steel butterfly is not difficult and will not take much time. Typically, the work technique consists of twisting the wire (the manufacturing process depends on the correct material: the material should not be too thick so that it can bend, but should not be too thin so as not to bend) into several layers.

A body is created using spiral turns, after which wings made from two ovals are attached.

Some interesting facts

Metal is the most ancient mineral of interest to humans. He mined it, forged it, and then a new fence or another forged deer lit up the smile of passers-by.

During the rapid introduction of Hollywood films and development artificial intelligence, the topic of androids and the like has become relevant. Although the world is far from the rise of the machines, it is always possible to forge a transformer, say, for an exhibition.

Vitaly Yashkovich from Krasnoyarsk became famous throughout the city for his miracle robots. His collection includes such titans of world cinema as: Megatron, Terminator T-200 and T-800, Star Wars androids, as well as droids from cartoons. The owner himself claims that he will not sell his robots to anyone, they say, he created for the soul

You too create, because the world is unidentified and multifaceted. Give him something new and unusual.

Photos of metal crafts

The advantage of metal crafts is the availability of materials. The work uses any available parts: screws, washers, nails, old devices with a metal mechanism, and much more.

Currently popular metal fences, doors, fences, which can be complemented with forged patterns or toys made of metal parts.

Materials and tools

The following devices and materials will be needed:

• paper and pencil for creating a sketch;
• welding device;
• hammer;
• grinder for cutting metal;
• rust dissolving agent;
• sharp scissors;
• washers and bolts for decoration;
• steel rods of various lengths;
• sheet of iron

The specific set of materials depends on the type of craft.

Prepare all the parts in advance; if necessary, treat the surface of the iron with a special anti-rust agent so that the surface is clean - thanks to this, the finished craft will not be covered with rust and will last for a long time.

Metal owl

1. Prepare a template for the owl by drawing it in pencil or printing it on a piece of paper.
2. Cut out the outline of the figure and attach it to a metal sheet, outline the silhouette with a pencil.
3. Using a grinder, carefully cut out the edges of the workpiece. Using a drill, drill holes for attaching the future craft and for creating eyes.
4. Make the paws from a metal rod, giving them a corresponding curved shape.
5. Treat the surface of the owl with a special solution and paint.

Rose of steel

Prepare the following tools:

• welding machine;
• hammer;
• Bulgarian;
• paint for metal surfaces;
• sharpening stone;
• pliers;
• wire;
• scissors for cutting metal.

Step-by-step instruction:

1. Cut rose petals from a steel sheet - the larger, the more magnificent the bud will be. Make them different sizes: for the lower tiers of the flower - larger, and then smaller and shorter, so that in the center you get a rolled bud.
2. Treat sharp edges of petals with whetstone so that they become even and smooth to the touch.
3. Twist the steel rod into a spiral using pliers.
4. Weld the petals, bases down, to each other, folding them into a rose shape.
5. The rosette can be supplemented with thorns and leaves - two leaves on each stem on different sides.
6. Cover the finished craft with paint, for example, a silver shade.

Simple metal toys

Some crafts can be created from scrap metal materials without using special tools for welding and cutting metal sheets.

This uses wire, screws, washers, nuts and other small parts that can be glued or twisted together with children.

Dog made from bolts

1. Take a large nut and hot weld or glue gun four upside down bolts to it. You will get a blank body with legs.
2. Make the muzzle from a short wide screw, gluing it with its leg to the front upper part of the body, slightly lifting the head up at an angle.
3. Make the eyes from small nuts, attaching them on top behind the head of the screw representing the muzzle.
4. Give the figurine the appearance of a puppy by gluing on a tail and ears.
5. With the help of such a base, you can make other animals - a cat, a horse, an elephant, supplementing the blank for the body with the corresponding elements in the form of ears, nose, etc.

Typewriter

Prepare materials for making crafts. You will need 4 small wheels, metal parts for the body and additional parts for decoration: headlights, exhaust pipe, chair seats. The more detailed the car is, the more beautiful and realistic the craft will be.

Both boys and girls will enjoy watching the process of creating a toy car.

The body of the machine can be assembled in advance, the parts can be welded or glued together.

Attach the wheels to the workpiece, stick additional elements decor.

The finished machine can be coated with varnish or paint.

Wire butterfly

The technology for creating this craft is very simple and is suitable for making together with children.

In this case, the work consists of twisting the wire in the form of curved parts for the wings and antennae of the butterfly.

The wire must be strong, but flexible enough so that it does not break during work and can easily take the required shape with the help of your hands.

Make the wings from twisted ovals, decorating them with patterned patterns in the form of curls and spirals.

For the body, take a thicker piece of wire or twist several thin wires together to form a body.

Make antennae from thin twisted pieces of wire thread and attach to the butterfly's head.

Cover the finished craft with colored paint or clear varnish.

Other insects, such as dragonflies, are created using a similar technique. They differ from the butterfly in their larger body and thin, elongated wings.

It is important not to forget about precautions when working with tools such as grinders and welding; be sure to use protective equipment - a mask, gloves.

The fastest and most reliable way to fasten metal parts is electric welding. Anyone can learn how to use it. Having bought an inverter, and also spent half a pack of electrodes to gain practical skills, you can safely try to create metal crafts with your own hands. Installation of structures, repairs at the dacha, production of garden accessories and much more from now on becomes available.

The first metal crafts

Many people now have welding. Often the device is purchased for construction or repair purposes. Not even necessarily for yourself. If there is a need for it, you can call a self-taught neighbor or a familiar specialist welder. After completion of the work, the unit simply stands idle.

But sooner or later the moment comes when you should make up your mind and try to cook something yourself. There's nothing wrong with that, if you have the desire. The main thing at this stage is not to get burned and not to catch “bunnies”, and experience comes with practice. If there is or Vacation home, there will always be a use for welding. With its help, you can solve problems of territory development much faster.

Not everything can always be bought in a store. Weld the gate, build a base for a bench or table, “grab” it to metal pole a hook for fastening a rope or an additional support for weaving grapes - this seems like a trifle, but it seems inconvenient to call a welder over and over again for this reason. This means you need to master the basics and solve everyday problems yourself.

Welding Basics

Of course, it’s not worth taking on serious work with critical connections right away. You can practice on a piece of scrap metal. At the first stage, you should learn how to light an arc and hold it, maintaining a constant working gap between the workpiece and the electrode as it burns.

After this, you need to work out the educational technique weld, fusing a layer of metal onto a flat surface. Then you can proceed to adjusting the current for different thicknesses of the workpieces being welded. Welding is a technique for joining two metal parts, based on melting their surfaces at the junction. They are joined into one by adding a layer of electrode binder material.

The current is selected in such a way as to ensure melting of only the surface layer without the formation of holes. It is better to master the technique on electrodes with a diameter of 2.5-3 mm. They must not be old and must be dry, otherwise the first experience will most likely be ineffective, which may discourage you from learning how to create metal crafts.

Welding makes it possible to correct minor and sometimes serious flaws or installation errors. It is enough to cut off the seam of the “tack”, and the parts are separated. After cleaning the area of ​​unsuccessful welding, the process can be repeated.

Material

Any owner of a country house or owner of a summer cottage will probably have metal waste on their farm. These may be the remains of pipes after the installation of a gas pipeline, water supply or heating systems. A real owner usually does not throw away the remains of a channel or pieces of reinforcement. You can also find used nails, bolts and nuts.

Such scrap metal very often becomes a material for new repairs or improvements to old ones. There will probably be outdated garden tools, chains, old dishes, as well as spare parts from a car, motorcycle or bicycle in the garage or shed that have not yet been handed over to collection points.

From all this you can make useful and practical metal crafts. With your own hands, using welding and available materials, you can repair old garden tools or make new ones from waste, taking into account personal experience, your preferences and business conditions.

You can make your backyard cozy without purchasing new equipment. From used, but still strong metal, you can build a base for a country table or bench. Finding the right sheet of particleboard for the table top and boards for the bench won't be a problem. Racks can be made even from substandard inch pipes.

If you have a supply of material, you can swing on a swing. It is better to make the structure permanent, with the base concreted. You need two sidewalls made of pipes welded at an angle, with jumpers for rigidity. The more massive the swing seat is, the larger this angle should be. The jumpers can be welded at ground level or even below so that they are not visible.

It is better to make suspensions from chains, but you can also use a reliable rope. The beam for fastening must be massive. A thick-walled pipe, a piece of rail or channel will do. It is best to fasten frame parts and suspension brackets by welding.

At any dacha, with rare exceptions, there is a barbecue or other similar device. A couple of logs for sitting, an old stump as a table and charred bricks for limiting the fireplace and laying skewers - for some, this may be relaxation, but it is better and more convenient to use a more advanced design.

The grill can be disassembled. You can bring it with you to your dacha, or it can also have a permanent home with the possibility of transporting it to a storage location. A barbecue made from an old steel barrel is quite suitable for this solution. It can be made on our own and get by with just a grinder and a drill. However, it will be better and easier if you use a welding machine.

An empty and washed barrel is cut lengthwise along the vertical center line into two halves. Legs made of rods, fittings or pipe sections are welded to one part. Top part serves as a hinged lid and can be mounted for convenience on welded old door curtains.

Crafts made from thin sheet metal can be secured by welding only after gaining some experience. In order to reliably weld parts and not burn a hole with the electrode, you should accurately select the welding current and work with short tacks with constant monitoring of the quality of the seam.

Metal sculpture

The garden around a country house is not only an area where trees and shrubs are grown for collecting fruits and berries. This is also a place to relax! A great addition Garden sculpture will serve as a complement to well-groomed plantings.

It may not necessarily be made of concrete or plaster. For a person with creative potential, there are no limits to its expression. If at the moment you only have at hand a welding machine, half a pack of electrodes, a crowbar and the desire to create, then from all this you can build an original and unique composition. Moreover, the complexity of execution may vary.

It depends on the available material and the idea. Such metal crafts for the garden in one case can consist of a dozen different, at first glance, incompatible parts of different origins and purposes. In another case, it can consist of hundreds of repeating elements of the same type, connected by welding into a three-dimensional model.

Where do you get ideas?

This question cannot be answered unequivocally. Someone, seeing random details in one place, imagines how they will fit together if they are combined into a common composition. Another purposefully goes to a scrap metal collection point and wanders around mountains of this trash in search of a suitable part for the chosen sculpture.

You can get ideas or simply take someone’s already realized idea as a basis from specialized book publications that are dedicated to metal crafts. There is nothing wrong with creating something you like from scrap materials available around the house.

In any case, DIY metal crafts created according to an existing drawing or sketch will be original. Welding is not copying, but a kind of creativity. Anything that is made with a decorative design and repeats a pattern or composition is perceived as a kind of masterpiece.

Safety precautions

To ensure that DIY metal crafts do not serve as a constant reminder of a bad welding experience involving a burn or injury, care should be taken. Working without a mask or shield is strictly prohibited, otherwise you may be exposed to ultraviolet radiation.

A protective suit will protect clothing and body skin from flying sparks and splashes of molten metal, and thick mittens or gloves made of dense material will protect your hands. It is not recommended to knock scale off a seam without protective glasses; sharp fragments flying in all directions can get into your eyes.

When working near wood or fire-prone surfaces, have a bucket of water and a wet cloth on hand. Random sparks or electrode residue that bounce off and land on such materials can cause smoldering and subsequent fire. When working indoors, you need to pay attention to proper ventilation.