home Pipes and fittings Inner corner for tiles. External corner for tiles: features of choice, installation technique and reviews

Inner corner for tiles. External corner for tiles: features of choice, installation technique and reviews

Nowadays, tiles are a fairly popular type of cladding. And rarely is a bathroom renovation complete without it. If the layout of ceramic elements for home craftsmen rarely causes difficulties after some training, then the inner corner or outer corner confuses many. However, manufacturers have already taken the trouble to solve this dilemma by producing fairly simply designed parts called tile corners.

What is this article about?

Types of corner elements

So, to solve the problem of competently joining the coating at the corners, you can use special elements. Moreover, experienced craftsmen have become acquainted with them and use them in their work for quite a long time. They know that a tile corner is a very convenient and easy-to-use device. If we characterize such parts, then in general they can be described as elongated strips with corresponding grooves for inserting ceramic edges into them, through which the evenness of the cladding at the joints is ensured. Due to them, it is possible to partially mask defects in the material (ceramics or plastic), the possibility of which cannot be excluded when cutting off the facing elements.

Typically the length of the corners for ceramic tiles is no more than 250 cm. These mounting elements make the cladding more concise and complete. Why does the room only benefit? The characteristics of the junction dictate their conditions for the installation of one or another type of element. For example, at an external joint, the ends of the ceramics will regularly experience mechanical stress.

To prevent this, they are strengthened. If the corners of the tiles are strengthened, the coating will better cope with the emerging loads that inevitably appear in the bathroom. The joints with the corners will be safe, and their service life will increase. Sometimes in stores you can find another name for tile corners - trims. Some manufacturers of building accessories call this tile element this way. Despite the name, the following types of corners are distinguished based on the base material:

Aluminum - will be appropriate where ceramics of 2 or 3 shades are combined in the corner zone and where a color plastic trim cannot solve the task assigned to it. And all thanks to the reliability and neutrality of the color of such an element. In addition, the color of the aluminum fittings is good addition metal parts in the shower stall.

Plastic - made from polyvinyl chloride profile, they have a wide range color solutions. These are lightweight, flexible and waterproof elements. Due to the light weight of PVC parts, it is possible to glue them to the joint with a silicone sealant after laying the ceramic coating. When installing a shower stall, this is the most indispensable option.

Metal - these corners for bathroom tiles are made of metal, they are wear-resistant and reliable. To cope with their role as fixing elements, they must be perfectly even. Since even a slight distortion will affect the laying of the cladding. They are made from stainless metal. Such corners for laying tiles can be found in gold or silver; they often have a nickel or chrome coating on the front side.

Ceramic - they allow you to mask seams, waterproof them, and give the entire cladding an aesthetic appearance. Their distinctive feature is that they have a pattern, exactly the same as on a tile cloth. Ceramic products are not cheap and usually come in addition to one or another tile collection.

There are differences not only in materials, but also in which corner the product belongs to (internal or external). In addition, trims differ in the installation method - for horizontal or vertical installation. There are also differences in the angles for tiles in their sizes. The latter have certain designations, reflected in the numbering from 6 to 12. The digital value indicates the distance from the base of the product to its edge line. Craftsmen select trim sizes, which are always 1 mm larger than the tiles. For example, for 7 mm tiles they take trims number 8.

The difference between PVC and metal fittings

The most popular are plastic corner profiles, as well as metal ones. Often consumers get confused in choosing, not knowing which one is better. The difference between them is not very big, but it is there. Hardware will last a little longer, however, plastic samples have not gone very far in this regard. A bonus from metal is the richness of the color range and the presence of noble shades in it. If the interior of the room allows, you can purchase accessories in a golden hue or with a chrome top. Such accessories contribute to a significant transformation of the room.

But the advantage of plastic products is the ease of working with them. It is easy to cut using the simplest tool available in every home. Corner elements of this type are made from PVC, which is a practical solution, especially for bathrooms. Because this material is absolutely not afraid of mold or fungi. An additional advantage of plastic is its low price.

Application nuances

When planning to purchase corner elements, you need to focus on their parameters and know exactly the quantity. The number is selected according to the thickness of the tile elements. If the thickness is different, the number is selected according to the largest value. The length of the joining elements is calculated by summing the estimated lengths of the joints from the inside and outside. Internal joints are usually masked along the entire length and up to the ceiling. When purchasing, you should stock up on one additional element in case of cutting.

In addition to numbering and length, corner parts are selected according to one more significant parameter - color. Since plastic and metal corners for tiles They have the widest selection according to this criterion; it is good to have a sample of ceramics with you when purchasing.

Mounting external elements

The sequence of actions when installing corners on the cladding from the outside will be:

Having cut off the excess length of the outer profile, it is tried on to the wall corner;
The edges of the tiles are inserted into the grooves on each side. Having tried it on, set marks and put the parts aside for now;
The corner surface is coated with glue, a profile is applied to it, all the time adhering to the mark;
Using a notched trowel, glue is applied to the tile, pressed into the grooves of the corner, and pressed with the profile to the wall. 5. The elements on the opposite side are treated in the same way;
External surfaces are cleaned of traces of mixtures, the tiled surface is wiped dry;
Both tiles with a corner (regardless of the type of material used) are fixed with construction tape. Hold the tape until the glue dries. Which takes about a day.

Mounting internal elements

To effectively decorate the internal joint in the finishing, take an internal tile corner. In this case, the profile size must be larger than the thickness of the cladding. To carry out proper installation, proceed in this order (in this case, the ceramics must be laid towards the internal joint):

The surface of the element is treated with glue in the place where it begins to join the adjacent tile in the corner area;
Having covered the wall with an adhesive layer, they “seat” the internal profile. 3. The tile is set into the groove and glued. To maintain a gap with the previous one, the seam is wedged using a construction cross;
Do the same with the tiles on the opposite side of the internal joint;
Place the required number of rows. The row on top is finished with a finishing profile, if necessary;
After 24 hours, the seam gaps are filled with decorative grout mixture.

Regardless of the chosen sample of connecting fittings (made of PVC, ceramics, metal or plastic), a room decorated with it will look stylish and expensive. If it is impossible to independently establish them for one reason or another, you can always turn to the help of professionals.

During renovations in the bathroom, sooner or later the question will arise about the joints of the tiles in the corners, in contact with the bathtub. What and how can you beautifully seal such a corner? What tile corners and profiles can be used for this.

In this article we will tell you in detail how to do everything beautifully, correctly and reliably.

Cut the tiles at an angle of 45 degrees

The most aesthetic and professional way to refine the tile joints in the corners is to cut the ends at an angle of 45 degrees. As a result, we get an even joint made of tiles, without any profiles, plastic corners, etc.

How to make a drink like this? First of all, you need to calculate and outline everything in advance. For drinking ( hooks) tiles usually use a professional tile cutter, cutting the end of the tiles at a 45 degree angle.

However, such a cut can be done without a tile cutter, using a grinder. True, this will take much more time and effort. Watch the video, everything is explained there clearly.

Plastic or aluminum profiles for tiles

This is perhaps the most common option for finishing tile joints and corners. Profiles are usually made of plastic or aluminum. They prevent destruction of the edges of the tiles and create the desired shape for the outer and inner corners.

As an option - great! The only negative from the point of view modern design– this corner will be visible.

Such a profile for tiles costs on average about 50 rubles per 2.5 m length.

The only caveat is that you need to take care of installing them in advance, even before laying the tiles. They are attached under the tiles using a special profile.

Plastic corners

For those who are renovating their apartment on their own, the easiest way would be to use special profiles for tiles that hide the joints in the corners. This is also one of the least expensive ways to seal existing cracks.

The cost of one corner 2.5 meters long is from 20 rubles. No plastic fastening required special effort and time. Sometimes they are simply glued with sealant. Despite the fact that this is not a particularly aesthetic method, some people are satisfied with this option due to its practicality, cheapness and simplicity.

Plastic tolerates moisture and temperature changes well, copes well with the impact chemicals, does not require special care and dirt can be easily removed from it. And most importantly, it perfectly hides the cracks at the junction of the internal corners of the tiles.

Ceramic corners

The ceramic edging looks very original and makes the design more complete. The cost is more expensive compared to other types of corners ( the price depends on the type of tile you have).

The baseboard looks better than the plastic tile corner. Ceramics – natural material, which is preferred by supporters of “natural” interiors. It is actively used to hide the joints between the wall and the bathroom. It copes well with moisture and is practically not subject to mold formation. Does not require constant care and can be treated with ordinary detergents.

This corner is secured with regular sealant. There are both external and internal corners.

Tape border, self-adhesive corners

On sale you can often find special tape corners (border tape). It is a flexible tape that can create a smooth and sealed corner.

The main purpose is to close and seal the joint between the bathtub and the tiles (walls). Installing such a tape compared to plastic material it goes much easier. The tape has a self-adhesive base.

Fillet

The fillet is also capable of masking failed seams, gaps, joints and minor errors repair work. The amount of gap that a corner can hide depends on its size. It is quite easy and simple to attach - glue it to the sealant when the work on laying the tiles is already completed. Due to the soft edges, the corner ideally takes the shape of the surface, taking into account all its irregularities and errors.

Since the structure is not susceptible to moisture and various temperatures, the fillet is used as a seal. You can purchase such a corner for 150 rubles per 2.5 m.

Ceramic material is the most famous and practical for conducting finishing works. Actually, for this reason, tiled coverings are found on walls, floors and even ceilings, mainly in those rooms where there are temperature changes and high humidity. However, in order for the room to look impeccable, tiles alone are not enough. That is why at the final stage of repair, external corners for tiles and other elements are installed.

Advantages of tile corners

Tile corners are not a requirement for tiling, but they are necessary to eliminate uneven edges of the tiles and also as a functional component.

In order to understand the full benefits of an external corner for tiles, it will be useful to consider its advantages:

Possibility of designing complex geometric planes. When installing tiles at an angle of 45°, using a corner will allow you to complete the work without sawing the blade.
Covering uneven edges and imperfections in tiles. A cut processed using a corner looks perfectly smooth and even, respectively. general form becomes much more attractive.
Visual perception. The cladding, finished with the installation of corners in a contrasting shade, looks very neat.
Reliable waterproofing. When using a corner, water will not be able to seep into the joints between the tiles, and accordingly, the occurrence of mold and mildew becomes impossible. This moment significantly extends the service life of the cladding.
Safety. If someone suddenly slips on a wet floor, the presence of corners on untreated tiles will lead to cuts and injuries, and installed corners will hide these defects.

Important! If the room is decorated in baroque or folklore style, then the presence of corners will be an indispensable part of this composition. The process of laying tiles itself is not easy, so to make the job look perfect, use the corners. If you believe numerous reviews, the presence of this element helps make the composition complete.

Which corner to choose for tiles

A tiled corner is required to design a corner area, join tiles, cover difficult areas, connect plumbing fixtures to tiles, etc.

Corners come in two forms:

Inner corner. This element is used to connect the corner joints of the fabric of adjacent planes. For example, the junction of the ceiling with the wall, as well as the combination of the shower stall with the wall. The use of a corner in this case does not allow moisture to get between the tile seams and under the tile itself.
External corner for tiles. This element is used to design wall projections. This process is necessary because this part of the wall is continuously exposed to mechanical stress. In addition, covering the sharp edges of the tile with a corner will help eliminate the possibility of injury to people nearby. In other words, in this case the corner is a protective element. It can be installed both during the cladding process and after it is completed.

Functions of a tile corner

Corners can be both functional and decorative, it depends on the function that it will perform.

Functional elements are external metal corners for tiles, tiles and plastic. All of them are able to withstand large mechanical loads.
A decorative corner is used only for aesthetic purposes, for example, it can be an external aluminum corner for tiles. Elements made in one or several colors will give the interior a finished look.

The most affordable and fastest way to decorate corners is to use a strip border, but this, unfortunately, is the most short-lived method, which also does not look very beautiful. The most commonly used is a self-adhesive border. Before installing it, it is necessary to treat the surface with an anti-mold and fungi agent. This corner is very light, bends well and does not crack during the gluing process.

Materials from which corners are made

Various materials are used to make external corners for tiles:

Aluminum. This universal material, the color of which goes well with almost any color and design solutions. In addition, the element can be perfectly combined with interior items and metal structures. The main advantages of aluminum outer corner for tiles are lightness, high strength, long service life, and corrosion resistance.
Metal alloys. Almost all types of these elements are coated with gold or silver paint; there are chrome-plated corners for tiles, external and nickel-plated. They are considered universal and suit different stylistic trends in the interior.
External plastic corner for tiles. This is a very durable element, practically waterproof, with a huge selection of colors and shades, which makes it possible to use it even in the most expensive interiors, and it is also very light.
Ceramics. Corners for tiles can be made to look like ceramics or made of ceramics. From an aesthetic point of view, this option is the best. Quite often, a ceramic element becomes part of a tile collection, which is why it is recommended to pay attention to this particular type.

Life time

If we compare the materials from which the corners are made in terms of service life, then metal will come first, with plastic outer corners for tiles taking last place.

Corners made of metal provide good tightness compared to elements made of other materials.
Polyethylene curbs have such advantages as ease of installation and affordable cost, however, with constant interaction with water, they will have to be changed every 2-3 years. But, according to customer reviews, this point does not particularly scare them, since the low cost of the element is more important for many.
The advantages of corners made of ceramics include high strength, water resistance, as well as poor thermal conductivity and aesthetic appearance for many years. The disadvantages of ceramic corners include the following: high cost, complexity of installation, especially if cladding of architectural compositions was carried out. The appearance of a ceramic element can only deteriorate in the event of an impact. After strong mechanical impact, tiles begin to crumble and require urgent replacement.

Factors to consider when choosing corners

In order to choose the right corner, you should follow some rules:

Thickness. The corners also have different thicknesses, so when choosing an element you should proceed from the parameters of the tile. Experts recommend taking a corner 1 mm thicker than the tile itself.
Design features. According to the rigidity of the corners there are three types: soft, semi-rigid and hard. This parameter is selected depending on the complexity of the architecture. If you need to design a complex geometric or curved design, then you should opt for a plastic corner, which is very easy to cut and bend. A metal corner is suitable exclusively for a flat and clear space.
When going to the store to select a corner for outdoor tiles, you should take with you a sample of the fabric that you are going to lay indoors. This will allow you to perfectly match the color of the corner.
When choosing a corner, try to rely on all the recommendations listed, then the installation will not bring you any surprises.

Installation of external corners

Installation is carried out only after the cladding of one of the walls forming the outer corners has been completed. The process consists of several steps:

Before you begin cladding the second wall, the corner groove must be placed under the tile sheet, which will be used to cladding the other wall of the room. Need to pay great attention the fact that the dimensions of the groove must strictly correspond to the parameters of the tile. Otherwise, when the size of the groove is smaller, it will become impossible to insert it, and if, on the contrary, it is larger than the thickness of the tile, then you will have to use a lot of sealant.
To make facing the next wall more convenient, the corner should be secured with tape.

The layout of the outer corner under the tile should be done close to the corner, and its vertical position must be constantly checked with a level.
After the work is completed, it is necessary to seal the voids with acrylic or silicate glue. This must be done carefully so that there are no voids left.

Slicing

Quite often, when installing corners, you have to trim them. For example, if after laying the tiles it is planned to install suspended ceilings. Once the element has already been installed, it is very difficult to trim, and if the corner needs to be installed near doorway, then it is almost impossible to do this.

In most cases, the corners are cut for installation perpendicular to each other. In this case, cutting is carried out at an angle of 45°. This must be done extremely carefully, since the slightest deviation can lead to the formation of a gap at the junction. Careless work will lead to the formation of burrs, which will not allow the corners to fit right next to each other. An indispensable assistant in the cutting process is a miter box, which will provide correct location layouts at the desired angle. You can cut the corners with a hacksaw or a turbine.

It is worth noting that cutting well requires some skill. Therefore, the work should be carried out with full responsibility, carefully making all markings and measurements. If suddenly the geometry of the cut differs from a right angle, you should be smart.

Conclusion

Recently, external corners for tiles, ceramic or made of other materials, have become an integral attribute when laying tiles, since their presence gives the interior a complete look in any room. And although this element is not mandatory, most people still prefer to purchase them and enjoy the complete composition.

Modern renovation country house or an apartment is rarely complete without laying tiles on the walls or floors. If installing tiles on floors and walls does not cause any particular difficulties for most home craftsmen after acquiring a certain skill, then external and internal corners baffle many. At the same time, there are simple and affordable elements that can solve the problem of joining coatings. We are talking about corners for tiles.

Corners for tiles are long (250 or 270 cm long) parts that, due to their structure, allow not only to obtain even tile joints, but also to eliminate some defects in the material that form when cutting it. The use of these elements gives the tile surface a finished look and the whole room a certain elegance.

It is also important to give the corners of the tile covering high mechanical strength and resistance to shock loads, which are inevitable during the operation of the room, replacing plumbing, etc. External joints of tiles, protected by tile corners, among other things, become less dangerous for residents, since the ends of the ceramic parts are completely hidden.

Sometimes in specialized literature you can find another name for these building parts - trim. Perhaps some advanced trade organizations They can include this term on their price tags.

Regardless of the name, tile corners can be divided according to several criteria:

according to the material from which they are made - plastic and metal;
According to their location and functions, they are divided into internal corners, installed in the internal corners of rooms, as well as when joining horizontal and vertical surfaces, as well as external ones;

According to the dimensional characteristics of the tile (thickness), the corners are produced in several basic numbers, from No. 6 to No. 12. The number determines the distance from the base of the corner to its edge.

Features of use

When planning to purchase a corner, you need to decide on the basic parameters of the elements and their quantity. We select the trim number based on the thickness of the tile. If you are working with several sizes of tiles, you must take into account the sizes of all. The length of the connecting elements is calculated based on the estimated sum of the lengths of the internal and external joints. Internal corners for the walls of a bathroom, toilet and other rooms, as a rule, are installed up to the ceiling, depending on its type - suspended, plasterboard, etc. And some amount of tiles can be saved if you take this fact into account. Naturally, installing the corners will require trimming them, so plan on one additional element at a time.

In addition to markings and length, there is another essential criterion - color. Modern industry produces corners made of plastic and metal in a wide range of colors, so it’s a good idea to grab a small sample of your tiles when purchasing trims, in case you didn’t take care of this when purchasing the tiles.

Directly at a hardware store you can be offered both plastic and metal corners. Which option should you prefer? Metal products are more durable. They allow you to get various options for metallized coatings from chrome to gold, which can significantly diversify the interior of the room.

Plastic is less capricious to small errors in operation and can be easily cut with simple tools available in every home. An important criterion in favor of plastic corners is their price.

Technology for installing corners for tiles

Installation of a corner for tiles is carried out directly during the process of laying tiles. Fastening of elements to vertical or horizontal surfaces is carried out using tile adhesive. The perforated base of the products allows them to be slightly pressed into the layer of glue, which, when hardened, reliably fixes the trim, regardless of the material from which it is made.

There is no general opinion among professionals regarding the order of installing the corner and laying the tiles. Some fasten all the corners, aligning them and controlling verticality and horizontality, and then install the tile covering, trimming the joining parts. Others lay tiles on walls or floors and, as necessary, install trim at the transition of internal or external corners, also carefully monitoring the correctness of its position.

Regardless of your liking for one method or another, it is better to start installing tiles on a new or next surface from a pre-fixed corner.

Particular attention should be paid to marking and sawing the joints of the corners. The overall effect of the entire work will depend on the quality execution of these elements. It is convenient to mark 45° angles using a universal square, a student triangle, or remembering the basics of geometry and constructing the diagonals of a square on the edges.

In the process of laying tiles and joining them with a previously installed and suspended trim, it would be a good idea to periodically check that the corner for the tile is in the correct position, and, if necessary, make the necessary adjustments in a timely manner. Only in this case will it be possible to achieve maximum quality of tile work.

After the installation of the tiles and corners is completed and the tile adhesive has completely set, which usually happens after 24 hours, the seams between the tiles and the trim, if necessary, are grouted with the same tile grout that is used for the main coating.

Dear readers, if you have any questions, please ask them using the form below. We will be glad to communicate with you;)

It's hard to imagine modern renovation, which did not use tiles. And the space of a bathroom, even a small one, with a shower stall or a full-fledged bathtub, is unlikely to be able to fully function without high-quality tiles. Tile corners give a room a unique finished look.

Laying tiles correctly is not an easy task; they usually use the services of specialists, but having even a little construction skill and a great desire will help you easily cope with such a task.

Not everything always depends on the skill of the craftsman or the quality of the tile, because it is not for nothing that they say that it is the retinue that makes the king. In this case, these are additional materials that help give excellent appearance and additional guarantees for your repair. It is worth considering that sometimes even the presence of a small part inbathroom on the corners can fundamentally affect the interior of the room.

We will talk about the corners that are used when laying tiles in the bathroom. This profile is needed for aesthetic and high-quality joining of tiles at external and internal corners. There are, of course, other ways of joining tiles at external corners (cutting tiles at an angle of 45 degrees, regular joining and grouting), but they are not so effective and beautiful.

Types of corners for tiles: external and internal

6 reasons to use corners when laying tiles

It simplifies the process of laying tiles at corners, because when using such fittings there is no need to trim each tile at the joints in the corner area.
Connecting tiles at the outer and inner corners involves reducing its thickness, since each tile needs to be cut at 45 degrees (as in the photo). This negatively affects the service life of such a product in the future, since along the edges
the tile will be small in thickness.
Cut tiles at the outer corner are fraught with the potential for bruises not only for children, but also for adults. If you consider that the floor in the bathroom can be slippery due to high humidity, then the risks increase even more, because even a small mistake is enough and you can easily get injured. An external corner with an installed PVC profile partially eliminates this issue.
When installing a profile in a bathroom, the waterproofing properties of the tile are significantly enhanced, since moisture does not get into the seams between the tiles and chips and mold do not appear.
The strength of the wall increases, because the corner acts as a connecting link between the rows of tiles.
With the use of such a reinforcing and decorative element, the aesthetic design of the bathroom benefits.

Types of corner fittings

To decorate the joints between the wall and the bathtub or shower stall, use a self-adhesive border, which also protects the seams well from fungus and mold.

Corner trim can be internal or external. Internal corners are concave-shaped products designed for neat joints of internal corners. This device perfectly protects against fungus, mold, and aggressive detergents.

Important: when choosing a corner for a tile that has discrepancies in color scheme(for example, the part of the wall at the top is light, at the bottom is a little darker), do not be put off by the color of the wall. Fittings in a neutral or metallic color will look more aesthetically pleasing.

Aluminum corner	Thanks to its reliability and neutral color, it can well connect together those parts of the corner area where tiles of two or three tones are used, and where a colored plastic corner cannot cope. Also, the color of the aluminum fittings goes well with the metal elements of the shower stall.
PVC corner	The plastic (PVC) corner (pictured) is made of PVC profile, the color range is wide. This material characterized by lightness, flexibility, water resistance. Due to the small mass of PVC products, they can be glued to the joint at the joint. silicone sealant even after laying the tiles. They are also indispensable when installing a shower stall.
Ceramic corner	A ceramic corner has the same functions as corners made of other materials: ceramic corner masking of seams, waterproofing, surface decoration. A distinctive feature of such fittings is that the manufacturer can apply an imitation of the pattern that is present on the main tile cloth to the ceramic corner. The ceramic corner is not very inexpensive and usually comes as part of a certain tile collection (pictured).
Metal corners	Bathroom corners made of metal tiles are durable and reliable. metal corner for tiles To perform their function efficiently, they must be perfectly level, since even a slight distortion will entail a disruption in the finishing masonry. They are made from stainless metal. Such bathroom corners are painted in golden or silver tones, which often matches the color of the shower stall. You can often find a chrome or nickel plated surface of such products.
Accessories for decoration	This profile is made of PVC of different colors, designed to hide the seam and significantly improve the tiled wall, it can be self-adhesive. They can be used to finish the joints between the shower stall and the wall. It is also rational to use it in places where the immovable part of the screen from the shower stall and the sides of the tray or bathtub are attached.

External corners provide additional reliability of the corner protruding part at the joint and its aesthetics. As for the material, the corner can be plastic (PVC), metal, ceramic. The consumer chooses exactly the type that suits the at this stage repair work.

Tip: choose a corner, either plastic or ceramic, a little thicker than the tiles. The difference should be about 2-3 mm. If the difference is too small, the tile will not be able to fit into the corner.

How to install an outer corner

To install fittings for external corner structures, you must adhere to the following order:

Cut the required length of the external profile for the bathroom, attach it to the corner of the wall (temporarily).
Insert the tiles into the grooves on both sides, try them on, mark them and put everything aside.
Apply glue to the corner area, “plant” the profile on it, and make sure it matches the mark.
Using a notched trowel, apply and spread the adhesive on the tile, insert it into the groove of the corner, and press it with the profile to the wall.
Do the same with the second tile (on the other side of the corner).
Clean the outer surfaces of the mortar and wipe the tiles dry.
Strengthen both laid tiles with a corner, be it plastic, metal or ceramic, using masking tape (until the glue dries). This will take about a day.

Installation of internal profile

In order to beautifully decorate the inner corner of the bathroom, use the inner corner. To ensure high-quality installation, proceed in the following order:

Buy a profile whose size is larger than the thickness of the tile.
Move in the direction of the inner corner while laying tiles.
Apply glue to the tile that will be joined to another in the corner area.
Cover the wall with the required amount of glue and install the internal profile.
Insert the tile into the groove, glue it, and to maintain the distance from the previous one, wedge the seam.
Proceed by analogy with the tiles on the other side of the inner corner.
Lay the required number of rows. Top row decorate with finishing profile (if necessary).
After a day, treat the seams with decorative.

Whatever corner you choose: PVC, ceramic, metal - it will still be able to bring the feeling of an expensive, high-quality renovation to the bathroom interior.