One-story house 6x6 made of timber. One-story timber houses

Project No. 113. House made of 6x6 timber, one-story

Price of a turnkey timber house in the basic configuration:

• House made of timber 100x150mm RUB 315,000
• House made of timber 150x150mm 340,000 rub.
• House made of timber 200x150mm 405,000 rub.
• Dry profiled timber +18%

Price of a house made of timber for shrinkage:

• House made of timber 100x150mm for shrinkage RUB 252,000
• House made of timber 150x150mm for shrinkage 277,000 rub.
• House made of timber 200x150mm for shrinkage RUB 342,000
• Dry profiled timber +18%

Shrinkable- means that after installing a log house made of profiled timber, construction is interrupted and the building remains unfinished for 6 to 12 months. The price for shrinkage includes wall and partition beams, rafter boards, roofing, necessary Consumables and work.

Price of a timber house project includes basic materials and installation work. After installation you will receive a finished wooden timber house with turnkey windows and doors. For permanent year-round living, it is necessary to order additional insulation. The basic configuration of the presented projects of houses made of timber is optimal for summer country living.

Technology that allows you to build frame houses 6 by 6 appeared in our country more than 30 years ago. But it was not popular due to frequent non-compliance with construction rules and the fragility of the building. Now it is possible to create objects that are superior in reliability to earlier buildings. Our specialists have completed internships abroad and apply all their experience in practice. We work on a turnkey basis, creating buildings from scratch. We will complete the projects, orientation, installation and design in a couple of months. Our housing construction is of good quality.

The layout is calculated based on the dimensions. You can make bedrooms, a living room, a hall, a bathroom, a kitchen-dining room, an attic and a terrace near the house. The client’s idea is transferred to the drawing, agreed upon and then becomes the basis for future construction.

Prices for 6x6 frame houses

All craftsmen set a price tag based on the cost of the wood. We have verified suppliers. We have been working with them for more than 10 years. They bring it to our workshop winter forest. It is easier to process and has good quality.

Advantages of Canadian-Finnish technology:

• not high cost of the object;
• accelerated construction;
• performing work in any weather conditions;
• the microclimate is created favorable;
• sound insulation is good;
• laying pipes inside the walls;
• no shrinkage;
• low foundation;
• light finishing.

Photos of our work are available on the Internet. We have posted them for your convenience. Take a look at them. Choose and contact us. We will recreate the object on your site.

• The foundation is support-column. 2 blocks per cabinet (for one-story houses) and 4 blocks in a cabinet per cement screed(for houses with an attic). Concrete blocks, solid, size 200x200x400 mm. The cabinets are installed on a compacted sand bed. Sand (PGS) is provided by the customer.
• An open terrace (if any) on supports made of planed timber with a cross-section of 100*150 mm, with shrinkage jacks. The fencing is a handrail made of planed timber with a cross-section of 40*100 mm. Steps at the entrance.
• Clear ceiling height of the first floor (from the floor joist to the floor beam) – 2.29 m (+/- 50 mm)
• The second floor is attic. Clear attic ceiling height (from floor beam to ceiling beam) – 2.25 m
• The gables are a frame made of natural moisture boards with a section of 150*40 mm, 100*40 mm. Exterior decoration gables - lining (spruce/pine AB) 17*90 mm. Wind protection – NANOIZOL “A” (for buildings with an attic).
• In the gables of one-story buildings, a door (1 piece) and ventilation hatches (1 piece for each gable, under the ridge) are installed.
• In the gables of buildings with an attic, ventilation hatches are installed (3 pieces for each gable).
• Eaves and roof overhangs with a width of 200 mm (for one-story buildings) and 300 mm (for buildings with an attic). The cornices and overhangs are hemmed with clapboard (spruce/pine AB) 17*90 mm.
• Construction of window and door openings with a dressing crown, without installing casing bars.
• Loading, delivery up to 400 km from the city of Pestovo, Novgorod region, unloading of a set of material.
• Assembly of a house/bath on the customer's site.

• The foundation is support-column. 2 blocks per cabinet (for one-story houses) and 4 blocks per cabinet on a cement screed (for houses with an attic). Concrete blocks, solid, size 200x200x400 mm. The cabinets are installed on a compacted sand bed. Sand (PGS) is provided by the customer.
• Waterproofing – roofing felt in one layer.
• The strapping is a beam of natural humidity with a cross-section of 150x100 mm. Along the outer perimeter the strapping is laid in two rows. The timber is treated with a protective compound.
• Floor joists - natural moisture board with a section of 40x150 mm per edge, with a pitch of 600 mm.
• The subfloor is a natural moisture board with a cross-section of 22x100mm. Steam, waterproofing – NANOIZOL S.
• Floor insulation – 100mm KNAUF/URSA mineral wool (or equivalent). Vapor barrier – NANOIZOL V.
• The finished floor of the first floor is dry tongue and groove batten(spruce/pine AB) 36mm thick. Every fifth board is fastened with self-tapping screws (for the possibility of re-upholstering the floors in the future).
• External walls - profiled timber of natural humidity with a section of 145x90 mm (wall thickness - 90mm) "block house" profile or straight. There are 17 crowns in total.
• The partitions of the first floor are profiled timber of natural humidity with a section of 145x90 mm, straight profile. They cut into external walls with a depth of up to 30mm.
• Intercrown insulation– jute fabric 6mm thick
• Inter-crown connection - on a metal dowel (construction nail 6x200mm, 250mm).
• Corner connection - “half a tree”. The outer corners of the log house are covered with clapboard (spruce/pine AB) 17*90 mm in two rows.
• An open terrace (if any) on supports made of planed timber with a cross-section of 100*150 mm, with shrinkage jacks. The fencing is a handrail made of planed timber with a cross-section of 40*100 mm filled with carved balusters. Steps at the entrance.
• The terrace floors are dry tongue-and-groove floorboards (spruce/pine AB) 36mm thick. They are attached with self-tapping screws to each board. The boards are laid in 5 mm increments.
• The terrace ceilings are lining (spruce/pine AB) 17*90 mm. Vapor barrier – NANOIZOL V.
• Clear ceiling height of the first floor (from floor to ceiling) – 2.25m (+/- 50mm)
• The ceiling lining of the first floor is lining (spruce/pine AB) 12.8*88 mm. (joint for layout is allowed)
• The second floor is attic. Clear attic ceiling height (from floor to ceiling) – 2.20m
• The roof height at the ridge is 1.50 m (for one-story projects).
• Floor insulation – 100mm mineral wool KNAUF/URSA (or equivalent). Vapor barrier NANOIZOL V.
• The attic floors are dry tongue-and-groove floorboards (spruce/pine AB) 36mm thick. . Every fifth board is fastened with self-tapping screws (for the possibility of re-upholstering the floors in the future).
• The cladding of the walls and ceiling of the attic is lining (spruce/pine AB) 12.5*88 mm (a joint for layout is allowed).
• Insulation of attic walls - 100mm basalt mats ROCKWOOL (or equivalent). Vapor barrier – NANOIZOL V.
• The attic partitions are a frame made of 40x75 bars, sheathed on both sides with clapboard (spruce/pine AB) 12.5*88 mm. The partitions are not insulated.
• Rafters - trusses made of natural moisture boards with a section of 150x40mm, 100x40mm. Installed in increments of 900-1000 mm.
• The gables are a frame made of natural moisture boards with a section of 150*40 mm, 100*40 mm. The external finishing of the gables is lining (spruce/pine AB) 17*90 mm. Wind protection – NANOIZOL “A” (for houses with an attic).
• In the gables of one-story houses, a door (1 piece) and ventilation hatches (1 piece for each gable, under the ridge) are installed.
• In the gables of houses with an attic, ventilation hatches are installed (3 pieces for each gable).
• The sheathing is a board of natural moisture with a cross-section of 22*100 mm, with a pitch of 300 mm. Counter-lattice - 20*40 mm slats, along the rafter slopes.
• Roof covering – ONDULIN (burgundy, brown, green) or galvanized corrugated sheeting. Under-roof vapor barrier – NANOIZOL S.
• Installation of a roof drainage system (PVC, DEKE). Colors – brown (chocolate), burgundy (pomegranate), white (ice cream).
• Eaves and roof overhangs are 200 mm wide (for one-story houses) and 300 mm (for houses with an attic). The cornices and overhangs are hemmed with clapboard (spruce/pine AB) 17*90 mm.
• The staircase to the attic is single-flight, on strings made of planed timber with a cross-section of 145*90 mm. Floorboard steps. The handrail and fencing in the attic are planed timber with a cross-section of 40*100 mm.
• The windows are wooden, double glazed, with sealing and fittings (screw-in hinges, twist locks). Inward opening doors. Dimensions (h*w) 1200*1500 mm; 1200*1000 m; 1200*600 mm; 600*600 mm. Windows are installed in casing boxes.
• Doors – wooden, paneled, solid (spruce/pine A). Size (h*w) 2000*800 mm; 2000*700 mm. Handles, hinges. On front door a padlock is installed.
• In window and doorways casing bars (swarms) are installed.
• Sealing corners, joints, abutments - spruce/pine plinth A.
• Finishing of windows and doors - spruce/pine frame A on both sides.
• Nails for fastening parts are black construction nails.
• Nails for fastening the lining – galvanized 2.5x50 mm
• Nails for fastening plinths, layouts - finishing galvanized 1.8x50 mm.
• Loading, delivery up to 400 km from Pestovo, Novgorod region, unloading of a set of material.
• Assembly of the house on the customer's site.

We have compiled for you a convenient table of differences in the configurations of houses for shrinkage and turnkey.