Home Chimneys DIY boat made of plastic pipes. Do-it-yourself homemade boat from PVC pipes

DIY boat made of plastic pipes. Do-it-yourself homemade boat from PVC pipes

Our craftsmen have a lot of imagination. As soon as they do not use PVC pipes, both in the interior and on summer cottage, even beds are assembled from this material. There are very original idea, which we want to tell you about, it will be interesting for people who are interested in fishing, or simply for those who like to spend time on the water.

You don’t need any complex engineering calculations or any expensive materials, just take a plastic pipe and the boat is ready. You shouldn’t think that you can do long swims on it, or that you can travel on it; it’s not suitable for this. But this boat is perfect for fishing on the river, or just for a ride. This product can be called a kayak, since there are great similarities. It has a completely enclosed hull, preventing water from entering the boat, like a kayak.

Plastic kayak

In order to create the body of this product, you need to take ordinary PVC pipes; we will fasten them together using ordinary tape. There is no need to think that this structure will not be durable. Try rolling the tape into several layers and tearing it apart. It is clear that nothing worked for you, and when assembling, tape in several layers will hold the connection perfectly. You will need three rolls of tape.

And so we assembled the frame, now we need to close it. To do this we need a waterproof tarpaulin or awning for PVC boats plastic pipes. When stretching the tarpaulin, we do not need any special materials; all this is done from improvised means. So, we have a very light and flexible boat, we can launch it on the water.

But before that you need to make a seat. An ordinary piece of plywood is suitable for this; you can also use a seat from a broken chair.

We also make oars from pipes and pieces of plywood, which we attach to the end of the plastic.

PVC pipe canoe

Introducing one more, that's enough simple design canoe. We will assemble the frame following the example of the first one, also from a plastic pipe and tape. We take a tarpaulin or other fabric that does not allow water to pass through, and secure it with strong twine. You can take not the material, but a polymer film, which will also work well.

For more security you need to secure five-liter cylinders at the bow and stern. Cylinders must be empty. Before you go for a ride on this structure, put on life jackets, especially if you take children with you.

Don’t forget that these boats are not designed to be able to sail far; it’s optimal to sail a few meters from the shore.

Plywood boat with a frame made of profile pipes

This design is assembled very quickly, so you can take the blanks with you and assemble it right at your resting place, so you don’t have to carry the finished product. Although it is light, it is still voluminous. After you have rested and ridden, you can also easily disassemble it and bring it home without special effort.

From this universal material you can assemble quite a lot of structures from a chair to a bookshelf.

IN modern world DIYers now have a lot of inexpensive materials from which they can make a boat with their own hands.

In this article we will look at how to make a homemade boat from PVC pipes.

The easiest way to make a boat from PVC pipes is to assemble the frame of a homemade floating craft using tape and stretch plastic film on top.

This method of assembling a boat with your own hands is very simple and does not require any tools, except perhaps a knife or saw for cutting plastic pipes to size.

Watch a video of making a homemade boat from plastic pipes and film.

As you can see, there are practically no difficulties!

Here's a test of this boat afloat.

It must be said that the not very adequate sailing qualities of this homemade boat lie entirely on the handiwork of the assemblers.

In fact, all homemade boats using this technology have lawyer Egorov’s kayak in their prototype.

Only he took the production seriously and the result was much better. It all depends on you!

You don’t need to wrap a homemade boat with film, but use banner fabric. This will avoid leakage, and the strength characteristics of covering the boat with banner fabric will increase by an order of magnitude.

Drawings of boats made of PVC pipes

The easiest way to get a drawing of a homemade boat from PVC pipes is to use a 3D editor. So, for example, for AutoCAD there are special libraries with plastic pipes, fittings and fasteners. Using it you can get a drawing of almost any homemade boat made from PVC pipes.

The second type of homemade boats made from PVC pipes is made using large diameter pipes.

Here is a video of testing such a homemade boat

Here you will have to approach production with great labor costs.

The video below shows the process of making such a boat in a garage.

To connect PVC pipes, you will have to purchase a special extruder or make it yourself.

However, making such a boat is only half the time. The second part of your time will be spent on equipping a homemade PVC boat made from pipes with fittings, as well as installing a transom and seats.

It's worth talking about the price.

The cost of making a homemade boat from large-diameter PVC pipes with your own hands greatly depends on the size. So, for example, a homemade boat 2.5 meters long will cost 5 – 7 thousand rubles. And for a boat 5 meters long it will cost from 8 to 9 thousand rubles, while in the store, the cost for boats of a similar size with a hard bottom starts from 38 thousand for a 2.5 meter and from 50 thousand for a 5 meter.

As you can see, the economics of making a homemade boat from PVC pipes are very justified.

boat from PVC pipes do it yourself is a simple design. Its production will cost very little, but you can get a lot of pleasure during the summer swimming season. Such a structure can be made from plastic materials on your own. It's not a difficult job.

PVC pipe is the most convenient option for designing products with your own hands. These products are perfectly held together using glue or soldering.

Even if the boat gets damaged during use, there is no need to be upset. Such repairs on your own will not be difficult. Using the same glue, simply apply a patch to the damaged area.

To what has been said, it must be added that building such a boat with your own hands is a very interesting job.

It’s a good idea to first make patterns of reduced sizes and glue such a structure from ordinary plastic bags. With this kind of work, you can “feel” the material, which means that working with full-scale sizes will be much easier.

After working out the patterns, they are increased proportionally. Craftsmen advise checking the compatibility of the workpieces by making the structure in natural dimensions from polyethylene.

This will, of course, take extra time, but it will be worth it. If any errors were made in the calculations, this will be clear on the initial stage, and you won’t have to spoil expensive materials.

A homemade boat made from PVC pipes confidently takes a leading place among do-it-yourself crafts made from this material.

The most common plumbing preparation home handyman on its own can turn into an original watercraft.

Sequence of work:

Frame. PVC blanks with a volume of at least 2.7 cm are cut into four parts. Two two meters and a half (for the upper part), and two with dimensions of 2.7 m (for the lower part). These pipes will serve as the load-bearing part of the structure.
Each end part of these blanks should be cut at an angle of 45 degrees.
Next, prepare slightly smaller trimmings with the following dimensions: 2 x 0.7 m, two x 0.6 m, two x 0.4 m and two x 0.35 m. These parts become supports for the boat frame.
The support pipes are attached to the frame. The ends of the workpieces must be fastened tightly, otherwise everything will fall apart and go to the bottom. For fastening, you can use adhesive tape or epoxy glue. For reliability, you can drill holes in the tubes with a drill and secure the structure with copper wire.
In preparation wooden board with holes, and is fixed to the bottom of the support frame. Plastic ties are used for fastening. The same fastenings are used to attach the chair to this board.
After this, the frame is covered with tarpaulin. It must be waterproof. It is laid diagonally, and all protruding places are wrapped inside. The tarpaulin is secured to the frame with plastic clips. If the tarpaulin has rings, then you can attach it to the frame after holes have been made in it for this. All folds must be stretched as much as possible. This will prevent unnecessary resistance while moving through the water.

Keel

A PVC boat pipe keel serves to provide the craft with increased stability. Most often, the keel is installed on options using an outboard boat engine.

The keel is installed so that its working part is located in the bow area of the floating device. From amidships to the stern the keel goes to "no".

Another advantage of installing a keel is that it partially raises the bow of the structure. And this, in turn, prevents splashes from entering the boat during large waves.

Making the keel

A homemade keel for a boat from a plastic pipe is easy to do. All the material that goes into work is durable, light weight and low cost. This keel is ideal for a punt.

For manufacturing, a four-part plastic profile is taken, which is used in assembling windows and window sills. It is covered with two foam rubber sleeves, which are used to insulate pipe materials.

For convenience, the keel is cut in half and, when connected, a PVC pipe (approximately 0.5 m in size) is inserted into the middle of the tetrahedron.

A keel made of such materials does not get wet, does not emit toxic substances, and is not destroyed by exposure to the rays of the sun.

Also, for flat-bottomed structures of a watercraft, you can make a homemade floor (slan). For work you will need four boards, approximately 0.9 cm thick.

The width of all pieces should be equal to the distance from the side parts of the structure. All these pieces are held together with tightening plastic clamps.

Frame

The frame of the boat made of PVC pipes is the basis of the foundations. The integrity of the structure will depend on its strength. You can learn how to build a frame correctly in the videos provided.

If you approach this issue irresponsibly, the constructed structure will fall apart the first time you try to launch it into the water.

After detailed development and verification of the drawing, you can begin practical work for creating a frame. You can secure the frame using the methods already suggested above, or you can use a soldering iron for plastic products.

Working with such tools is not difficult. Even a person who has no experience in this field can cope with these works. .

It is not recommended to buy this tool for a one-time job to weld a frame, justifying it as economically unprofitable.

It is better to use a rented device to attach a frame made of plastic pipes. This service is offered by stores that sell soldering irons.

A frame made from blanks soldered with a soldering iron will last a long time. In this case, each joint of the frame will be highly durable. This way you can make a very durable structure with your own hands.

If any difficulties arise during work, then video materials will help you solve the problem of how to properly make a frame from PVC pipes.

Cart

Unlike a boat, which will take a little time to create, a boat cart made from PVC pipes can be made quickly. It is intended for transporting a boat made of PVC pipes with an engine and adjacent cargo.

The presence of a trolley makes transporting the boat much easier. Having a do-it-yourself trolley, you can do the transportation without any outside help or stress.

In the provided photos and videos, you can see various options for these mechanisms. After considering them, you can choose the most suitable option for building with your own hands.

The dimensions of the cart depend on the dimensions of the boat. And when calculating them, you need to keep in mind that the width of the cart should be such that the watercraft fits comfortably on it.

To create such a design with your own hands, you need to prepare a pipe with a volume of 32 mm. Experts recommend choosing products fiberglass reinforced.

You should also stock up on appropriate fasteners for the pipes (couplings and crosses). You will also need a pair of wheels and a steel rod.

First, an axle is made from tubes with an inserted steel rod. Wheels are inserted onto it and secured with brackets. Next, a frame is made from the tubes, which is placed on supports above the axle.

On the frame it is necessary to provide fastenings for a rope with which the floating device will be secured to the trolley. That, in fact, is all the work.

Some more details

Now it’s clear how to make a boat from PVC pipes. This work It will require a lot of patience and will take quite a bit of time, but in the end result you can get great pleasure from such an addition to your vacation on the water as an excellent boat made with your own hands.

For ease of swimming you will need oars. They are also not difficult to make with your own hands. A thin PVC pipe is perfect for this.

It will need about two meters. Holes must be drilled at each end of the pipe roll. Then two strips 0.4 m long are cut out of acrylic.

These strips are attached to plastic tubes with self-tapping screws. It is not recommended to tighten the screws very tightly, because the acrylic may burst. It is recommended that the lower part of the oar be slightly rounded.

For greater stability of the product, outriggers can be attached to its side parts. Their role can be played by two large plastic bottles on remote bars.

There are advantages to this addition, such as the creation of free space for storing catch or any other small items. But this solution also has its downsides; it is a little more difficult to row on such swimming structures due to lack of space.

Awning

A real fisherman never gives up fishing winter time, nor in bad weather. When fishing in the summer, an awning can protect you from the scorching rays of the sun and from pouring rain while afloat. With such protection, the river trip will not be hopelessly ruined.

Our craftsmen have a lot of imagination. As soon as they do not use PVC pipes, both in the interior and at the dacha, they even assemble beds from this material. There is a very original idea that we want to tell you about; it will be interesting for people who are interested in fishing, or simply for those who like to spend time on the water.

Plastic kayak

And so we assembled the frame, now we need to close it. To do this, we need a waterproof tarpaulin or an awning for PVC boats made from plastic pipes. When stretching the tarpaulin, we do not need any special materials; all this is done from improvised means. So, we have a very light and flexible boat, we can launch it on the water.

But before that you need to make a seat. An ordinary piece of plywood is suitable for this; you can also use a seat from a broken chair.

We also make oars from pipes and pieces of plywood, which we attach to the end of the plastic.

PVC pipe canoe

We present another, fairly simple canoe design. We will assemble the frame following the example of the first one, also from a plastic pipe and tape. We take a tarpaulin or other fabric that does not allow water to pass through, and secure it with strong twine. You can take not the material, but a polymer film, which will also work well.

For greater safety, you need to secure five-liter cylinders at the bow and stern. Cylinders must be empty. Before you go for a ride on this structure, put on life jackets, especially if you take children with you.

Don’t forget that these boats are not designed to be able to sail far; it’s optimal to sail a few meters from the shore.

Plywood boat with a frame made of profile pipes

From this universal material you can assemble quite a lot of structures from a chair to a bookshelf.

Summer is coming, and that means swimming season. It would be nice to make a simple boat using plastic pipes. It will take approximately one month to create such a boat, and a school swimming pool will be suitable for testing it.

Step 1. Materials needed

For boat:
plastic pipes (PVC) - 122.5 cm
plastic pipes (PVC) - 401.3 cm
wooden board - 1×0.5 m
plastic clips - 50 pcs.
adhesive tape - 2 rolls
foam block - 2 pcs.
foam rubber - 30×30 cm - 2 pcs.
nylon thread
chair - 1 pc.

For supports (optional)
wooden slats - 122 cm×5 cm
bottles (for water) - 4 pcs.
super glue
screws (for drywall) - 8 pcs.

For oars
aluminum pipe - 225 cm
acrylic sheet - 40×40 cm
bolts, nuts, washers - any sizes, 4 pcs.

Manufacturing instructions:

Step 2. Boat frame

For the frame of the boat, it is necessary to cut the plastic pipes into 4 parts: (for the upper part) 2 × 2.5 m, (for the lower part) 2 × 2.7 m. These parts are the supporting frame of the boat. Each pipe must be cut at an angle of 45 degrees.

For the supporting part of the frame, you need to cut 1.3 cm of plastic pipe into 2x70 cm, 2x60 cm, 4x35 cm, 2x40 cm. The photo shows how to cut the support pipes on each side to secure them.

To make the frame, you need to connect the ends of two cut pipes of 2.5 m each using adhesive tape. They are fastened tightly “face to face” so that the boat does not break or sink. You can also use epoxy glue to better hold the frame parts together.

It is necessary to drill holes in the top and bottom of the frame, and then connect them with copper wire.

Frame support tubes need to be added.

Step 3: Securing the chair and foam

The wooden board must be secured to the bottom of the support frame using plastic ties. To do this, you need to drill several holes in it. Also, several holes must be drilled through the chair and boards, and the chair must be fixed to the frame using ties.

Step 4. Sheathing the frame

In order to cover the frame with a plastic awning, it is important to first make sure that it does not allow water to pass through. To begin with, the kayak is turned over, and then covered with a tarpaulin diagonally, all excess, protruding parts are placed inside the boat.

The tarpaulin is secured with tapes on both sides and secured to the frame with plastic clips. If the casing has rings, they can also be secured to the frame; for this, holes must be made in the frame.

To avoid unnecessary resistance while sailing, it is important to straighten the folds of the skin as much as possible.

Foam is added to the bottom after fixing the casing, but carefully so as not to spoil it.

Step 5. Making the paddle
To make an oar, you need 2 meters of aluminum pipe, in which 2 holes are drilled at both ends, at a distance of 10 cm from each other. Cut out 2 pieces of acrylic measuring 20x40 cm and round the edges.

Acrylic is secured using nuts, bolts and washers, after drilling appropriate holes on the pipe and plate. You need to carefully and carefully tighten the nuts on the plate, because... acrylic may crack.

Step 6. Attaching the outrigger buoys
If the boat is unstable on the water, you can attach 2 bottles to the outriggers on each side. You can limit yourself to one side, which is also effective.

The boat floats well on the water, but it is difficult to row due to the lack of space for rope and fishing line. Outriggers can provide this additional storage space.

Step 7. First test
You can use the pool for swimming.

As the test showed, the boat is very stable without outriggers, but maintaining balance at certain points is very difficult.

Outriggers provide better stability. To shift the center of gravity, you can move the chair further away from the bow of the boat, so the kayak won't lean as much.

Thank you for your attention.
It's time to go!

PVC is a modern material with many positive qualities. It is quite inexpensive, lightweight, strong, durable, resistant to various climatic conditions and Wednesdays. In addition, plastic pipes are easily and quickly connected, ensuring absolute tightness of the joints.

Thanks to this, the use of plastic pipes has gained wide popularity not only in the installation of water supply and sewer systems. Of these " craftsmen“They make a lot of useful “things” with their own hands, from racks and drinking bowls to sleighs and watercraft.

In this article we will tell you how you can quickly and inexpensively make a catamaran from plastic (with your own hands.

Contents of the article

Why a catamaran?

There are a lot of options for watercraft, as well as their purposes. For those who live near bodies of water, and especially for those for whom overcoming a water obstacle is a vital necessity, a catamaran is ideal. This type of vessel has many advantages. in front of kayaks, boats or yachts.

To make catamarans from plastic pipes, a minimum amount of material is required. In addition, remnants from the recent installation of a sewer or water supply system may well be used;
the catamaran is light in weight, so it does not cause problems in terms of transportation;
due to the design features - two cylinders connected by a deck, such a craft has high seaworthiness, strength, reliability and sufficient speed;
the ability to accommodate the required number of seats;
Any type of engine can be installed on a catamaran.

What does a catamaran consist of?

The catamaran has a large number of design features compared to other watercraft.

That's why you need to know its components in detail, before starting drawings and installation work.

The first, and most important, part of the catamaran is the floats. These are two chamber structures located on the sides of the craft. Their immediate task is to keep the ship afloat. Cylinders can be made from different materials, limiting the outer perimeter of the float. To do this, use the film from which inflatable cylinders, foam plastic or PVC pipes are made.
Connecting frame. It can be made of any materials, from the same plastic pipes to wood or metal. The lighter the catamaran frame, the smaller size may have floats.
Deck. This part is created to accommodate passengers, luggage and other things that will be transported by water.
Steering wheel. The function of the rudder of any watercraft is performed by an underwater blade, which for movement is directly installed parallel to the movement, and for turning it is bent in one direction or another using a rotary handle brought to the deck.
Oars, pedals, motor or any other device that propels the catamaran.

Vessel size calculation

The diameter of the floats, as well as the width and length of the vessel, depend primarily on where and how it will be used. The larger the crew expected and the more cargo will be transported, the larger the size of the craft and the diameter of the floats should be.

The vessel's carrying capacity can be increased by increasing the cross-section of the cylinders or their length. The decisive factor in this situation is the volume of air inside the cylinders.

Optimal parameters for calculating floats, Based on the crew and carrying capacity the following:

a single-seater catamaran should have a length of 2-3 meters with cross section balloon 0.3-0.4 meters;
for the manufacture of a two-seater vessel, cylinders with a length of 3.5-4 meters and a diameter of 0.45-0.5 meters are used;
three and four-seater watercraft have a length of up to 6 meters with a float diameter of 0.5-0.6 meters.

It is not recommended to make a catamaran longer than 6 meters, since it will almost completely lose its maneuverability. Although, if you are going to sail mainly in a straight line, there are no restrictions on the size of such a “ship”.

The larger the size of the vessel, the greater its maneuverability and stability, but the less maneuverability. This applies to both its length and width.

The width of a catamaran is primarily determined by its purpose and method of propulsion. If you are making a catamaran for river rafting using the kayak principle, its width should not exceed 1.2 meters. Otherwise, capturing water with oars becomes impossible. If it is planned to board rowers on cylinders, the width of the vessel can be increased to 2 meters.

If the catamaran is a fishing or pleasure boat and it is planned to be equipped with a sail, motor or blades with pedals, its width can be increased further.

The width of the catamaran should be at least one and a half times less than its length.

Manufacturing procedure

To make a catamaran with your own hands, you need to decide on its purpose and, based on from this, calculate the dimensions. We will consider two options for the vessel: the simplest single-seater and a tourist raft based on a catamaran.

Single catamaran

We start making the simplest single-seat catamaran by making floats. We take two pipes of the same diameter and length (based on the calculations given above, we will need plastic pipes for external sewerage with a diameter of 0.4 meters and a length of 2 meters). We fix it on one side of both pipes. This will be the back of the catamaran.

The front part needs to be raised for greater cross-country ability and maneuverability. To do this, we use two plastic elbows with a 120 degree bend. We attach them to the other end of the pipes and also close them with plugs.

When assembling cylinders special attention Pay attention to the tightness of the joints. The slightest depressurization can lead to the sinking of a ship on the water.

The floats are ready. You can start assembling.

To connect the floats into one “whole” catamaran, you can use anything. Plastic pipes of small diameter are suitable, wooden blocks, metal corners, etc.

From the material you choose, we make crossbars 1.2 meters wide.
We install the cylinders strictly parallel to each other so that the bends point up and in the same direction.
We fix the transverse strips on top of the cylinders. For fastening, both clamps and self-tapping screws can be used, with which the transverse strips can be screwed to the floats for greater strength.
We install any comfortable seat on the cross beams, take the oars in our hands and row where we want.

Do-it-yourself single-seat catamaran made of plastic pipes (video)

Tourist raft

The basic principles of making these two watercraft with your own hands are not particularly different. The only difference is that the pleasure raft will obviously not be designed for one person. And it’s even better if it can also accommodate cargo in the form of provisions, a sun umbrella, clothes, dishes, and other things.

We make floats using the above method. But you should take a pipe with a diameter of 500-600 mm and a length of 6 meters. This will make it possible to create a stable and passable vessel, on which you can take a nap without worrying about the life of the crew.
We make a strong frame measuring 6*2 meters. Since the frame must not only hold the cylinders in the correct position, but also serve as a platform for the deck, it is better to make it from metal corners.
Clamps are tightened onto the pipes from which the floats are made, to which, in turn, the frame is attached using bolts.
Flooring is made of boards on the frame.

This design allows you to install any driving device on the catamaran, from blades driven by pedals to gasoline engines.

In addition, such a platform allows you to fully sunbathe in the sun, catch fish, and, in general, have a fun and fruitful relaxation in a narrow circle of best friends.

An original idea for the summer for lovers of water recreation. Without bothering yourself with complex engineering calculations and without using expensive materials, make yourself a small boat. Perhaps such a vessel is not suitable for traveling by sea or other large body of water. But it will definitely come in handy for fishing or relaxing on the water.

This option is more like an Aleutian kayak. A kayak, just like kayaks, has a closed top hull, which protects the boat from flooding with water.

PVC kayak.

Connecting parts and assembling the body, as they say, on the knee. PVC pipes were used to create the frame, and connections were made using adhesive tape.
If you doubt the strength of the structure, then remember that tape wound in several layers cannot be torn apart.

In addition to the pipes, you will need two to three large reels of wide adhesive tape.

The finished frame is wrapped with a waterproof tarpaulin, which is pulled together from above using almost improvised means. The kayak is quite durable and light due to the flexibility of PVC pipes.

We lay a piece of plywood for the seat on the pipes.

The oars are assembled from a piece of pipe with a plywood blade attached to the end. It's even easier to do.

Canoe made from plastic pipes.

Another homemade flotation device design, from instructables.com. Classic canoes were made in exactly this way, albeit from different materials.

The frame is assembled from plastic pipes using adhesive tape.
Waterproof fabric is stretched over the body and secured with a strong cord.
Here, in fact, it’s not even fabric, but a durable polymer film.

For safety, large empty cylinders, no less than five liters each, are secured in the bow and stern. Also, be sure to wear a life jacket, especially if you have children in the boat.

And remember, such boats are not intended for long walks; their place is no more than a few meters from the shore.
I would also like to add that such a boat is assembled within a few hours. You can take pre-prepared parts with you into nature and assemble the product on site.

(Visited 644 times, 1 visits today)

PVC is a modern material with many positive qualities. It is quite inexpensive, lightweight, strong, durable, resistant to different climatic conditions and environments. In addition, plastic pipes are easily and quickly connected, ensuring absolute tightness of the joints.

Thanks to this, the use of plastic pipes has gained wide popularity not only in the installation of water supply and sewer systems. From them, “traditional craftsmen” use their own hands to make many useful “gimmicks”, ranging from racks and drinking bowls to sleighs and watercraft.

In this article we will tell you how you can quickly and inexpensively make a catamaran from plastic (with your own hands.

Contents of the article