How to remove a room door handle. How to remove a round door handle

Sections of the article:

Often there is a need to remove handles installed on interior doors in apartments or private houses. For example, fittings are changed after a breakdown or when the interior of the room changes. Therefore, any owner wants to know how to remove the door handle on an interior door with his own hands. To do this, you need to understand the design of the different types of fittings offered on the market today.

Types of door handles

Door handles are made in three types: stationary, round (knobs) and push-type.

Push

This option is the most popular among consumers. When you press this handle, the latch moves inside the door and it opens. When the pressure on the fittings stops, the tongue comes out and the door can be slammed back.

Such products are mounted separately without locks or as part of mortise locking mechanisms. The handle is protected from damage by special pads located on the outer part of the product. In this case, it is important to know the placement of the latch.

Round

These fittings are intended for doors of rooms that are closed from the inside. For example, in the bathroom or toilet. The products have the shape of a ball, in the center of which there is a shutter mechanism. In this case, the door can be opened with a key on one side, and a latch is installed on the other.

Stationary

Stationary hardware elements are attached to the door leaf with screws or self-tapping screws. They are equipped with roller type latches. The design of such a handle consists of overhead strips and brackets.

Reasons for disassembling fittings

The technology for assembling/disassembling door hardware is not a complicated procedure. Therefore, installation/dismantling work can be done independently.

The main reasons for the need to dismantle door handles:

• The fittings have become loose; the fastening bolts need to be tightened;
• The handle is cracked or broken due to significant physical activity;
• The locking mechanism has failed;
• New, more modern models of fittings have appeared on the market;
• The owners decided to renovate and update the interior of the premises;
• Due to low quality, the fittings quickly lost their attractiveness: the paint peeled off, large scratches or chips appeared on the surface.

Tools

Depending on the design of the fittings, the following tools may be needed for their installation and dismantling:

• Screwdriver set;
• Milling cutter;
• Hammer;
• Electric drill with a set of drills;
• Marker;
• Measuring tape;
• Screwdriver;
• Chisel.

Having the necessary tools and installation instructions at hand, you can independently install a door handle of any design.

Dismantling different types of handles

Before you remove a round or other type of handle from an interior door with your own hands, you need to understand its mechanism and carefully study the assembly instructions.

The procedure for assembling/disassembling the fittings is not complicated or time-consuming. Anyone can handle this task. The main thing is to properly organize the work process and first find out the reasons for the failure of the fittings.

Push without lock

Lever handles are often mounted on the leaves of interior door blocks. Most often in such products the rod breaks. Therefore, you need to know how to dismantle this type of fittings.

The pressure handle bar is secured to the blade with screws, which are unscrewed first. Next, the broken rod must be pulled out using pliers.

If the hardware cannot be removed, you need to find a pin or screw, press it and pull the door handle towards you. Instead of the old structural element, a new one is installed in the reverse order.

Plastic

Plastic fittings are easier to dismantle than other types of products. First you need to rotate the overhead strip, which is located under the plastic handle, 90 degrees. There are screws at the bottom that need to be unscrewed to remove the broken handle.

When purchasing new hardware, it is important to choose the same model from the same manufacturer. It is important that the fasteners and screw holes match.

Push with lock

The push handles used in conjunction with the lock are not very reliable and last a fairly short period of time. But if the latch functions normally, then it is not worth changing.

The algorithm for dismantling the product is also quite simple. First, the fastening screw holding the handle to the canvas is unscrewed and it is removed. Next, you need to lift the trim strip using a knife. It has a special connector for this. But this must be done carefully so as not to damage this part.

To remove the lock, you need to unscrew the four screws that are located under the bar.

Round

These products are distinguished by the fasteners that hold them to the door leaf. Round handles (knobs) are made without pins. They are equipped with spring clips and are included in the door delivery set. A special key is provided for them. If it is missing, then the spring part can be pressed with a nail or other thin object.

If there is no access to the latch, the flange is removed. To do this, you need to carefully pry it off with a sharp knife. The part is then rotated 180 degrees so that the spring component fits into the hole. A characteristic sound should be heard. Next, you need to press the latch and pull it towards you. After removing the flange, the decorative screws are unscrewed.

Stationary

Standard door handles are made in the form of a square, round bar or in the form of a bracket. Such products are attached to the door leaf with ordinary screws. The inner and outer handles are mounted on one rod. When you turn the handle on one side, it turns on the other at the same time.

To remove such a handle, you simply need to unscrew the screws that hold the structure bar in place. After this, the fittings are easily removed.

Push with magnetic lock

Before removing the round push door handle with a magnetic lock on the interior door, it is recommended that you familiarize yourself with the design and installation rules.

Such products are mounted directly on the door leaf; the mechanism operates almost silently and is characterized by a long period of operation. Most often, such models are installed on door blocks for children's and bedrooms.

After prolonged use or rough handling, the latch may become warped or begin to jam when exposed to a magnetic element. Therefore, to adjust the mechanism or completely replace the fittings, you have to remove them.

To do this yourself, you need to find a special hexagon connector at the bottom of the trim strip. The base of the structure is unscrewed with a key and left in a hanging position. Next, you need to find another hole in the moving part, unscrew the screw and remove the fittings.

After this, the rod axis will become accessible. Similar actions are performed on the other side of the door leaf. Next, you need to unscrew the main fastening element holding the handle and remove it. Now you can use a screwdriver to remove the magnetic mechanism located on the end of the door.

The need to disassemble the door handle arises for several reasons. These include breakdowns, the presence of abrasions, the desire to change an element, and renovations that involve dramatic changes in the interior of the apartment. To understand how to remove a door handle, you must first decide on its type.

Before disassembling, find out what type of fittings are. It is divided into 3 categories: knobs (round), stationary and push. The latter are used everywhere. If you press the handle, the latch goes inward. Without pressure, the element is extended.

The mechanism is installed with mortise locks. On the outer part there are linings that protect the handle from damage. Removing accessories requires care. You need to know the location of the latch.

Round models are installed in rooms that can be locked from the inside (more often found in the bathroom). Made in the shape of a ball. The castle is located in the middle.

Important! The keyhole can only be opened with a key on one side. On the other there is a latch.

Stationary ones are held on the door leaf with self-tapping screws or self-tapping screws. They have roller latches. The fittings are made of strips with brackets.

Tools

The list varies depending on the type of fittings. If you make a list, it will include:

• hammer;
• marker;
• screwdriver;
• drill;
• chisel;
• roulette;
• cutter;
• drill;
• flat screwdriver.

The complexity of disassembly and the tools used depend on the type of fittings. Each type of handle is easy to disassemble if you follow the instructions.

Push

It is found in door panels located at the entrance to the room. A common cause of unusability is a broken door hinge. If you have such a problem, you need to know how to remove the door handle of an interior door.

Instructions:

1. If the fittings malfunction, unscrew the screws that hold the bar in place. Use pliers to pull the rod out by the protruding edge.
2. If the fittings cannot be removed, find a screw or pin. Press it and at the same time pull the handle towards you.

The new element is installed in the same way, only in reverse order.

Plastic

This type of handle is easier to remove than others. Find the bar that protects the mechanism. It is located under the handle. Rotate 90 degrees. There are screws at the bottom. Unscrew and remove the fittings. Buy a new one from the same company. The fasteners and holes must match.

Push button in the entrance doors

Such fittings have low reliability and a short service life. A lock is most often installed in the door leaf. If the latch is working properly, there is no need to change it.

The algorithm of actions is the same as when dismantling the hardware in the entrance doors. Unscrew the screw located in the canvas. Remove the pen. There is a connector in the bar. Carefully place the knife in the slot and lift up. Do not damage the bar; it is easily deformed. There are four screws under the bar. Unscrew them and remove the lock.

How to remove a door handle

The knob differs from the previous handle in the elements with which it is attached to the blade. There is no pin in the round one. It has a spring lock. A key is supplied with the door leaf. If you don't have a key, use a nail or other thin object. Press the spring element with the key.

When there is no access to the clamp, remove the flange. Pry it open with a knife. Then turn it 180 degrees. The spring element falls into the hole. At this time a characteristic sound will be heard. Press the locking element and pull it towards you. When you remove the flange you will see decorative screws.

Stationary

Made in the form of planks of the following types: staples, square, circle. Attached to the door leaf with screws. Installation on both sides is done on one rod. If you turn the handle on one side, you can see how it turns on the other.

To disassemble the fittings you need to unscrew the screws. They are located in the bar or handle. Then the fittings are removed.

How to remove a push door handlewith magnetic lock

The mechanism is installed in the door leaf, is silent, and has a long service life.

Attention! The push model is most often used in bedrooms and children's rooms.

Due to careless or prolonged use under the influence of a magnet, the latch becomes jammed or warped. To remove the fittings, do the following:

1. At the bottom of the bar, find the hex socket. Unscrew the base with a tool and leave it hanging.
2. There is a second hole in the moving part. Unscrew and remove the fittings.
3. Access to the rod axis will open. Repeat the steps on the other side of the door.
4. Unscrew the bolts from the main mount. Remove the handle.
5. Unscrew the lock from the end of the door leaf with a screwdriver. Take it off.

So, to remove the handle of an interior door, you first need to determine its type and prepare the necessary tools. Follow the instructions carefully. With due diligence, disassembling the handle will not be difficult.

Today there are a huge number of different types of door handles. All of them are quite reliable, but sometimes they still have to be replaced or repaired. However, a problem arises here - not everyone knows how to disassemble This is the most necessary element of furniture in everyday life.

How to properly remove a door handle mounted on an interior door yourself? Read about it below.

Reasons for dismantling

In most cases, it is necessary to disassemble the handle if:

• she got loose;
• fell into disrepair;
• the lock itself needs to be replaced.

In the first case, there is usually no need to remove it. It is enough to simply tighten the screws holding it, or replace them with thicker ones (if the wood is worn out).

Unfortunately, budget versions of handles, in principle, cannot last long, and besides, they are made completely unsuitable for repair. The coating on them is usually quite unstable and will quickly peel off during use. Therefore, when they fail, they are simply replaced with a new one.

Often, during renovations, owners decide to replace old handles with new ones that are more suitable for the design being created or simply look more modern.

When buying a new kit, try to choose those that are made of good metal with a minimum number of components. Reliable pressure models, for example, should be equipped with bearings - they can serve you for several decades. By the way, quality is very easy to determine: the heavier the fittings, the higher it is.

The most common types of door handles

Most often, the following three types of handles are installed on interior doors:

• stationary;
• nobs (round);
• push.

The latter variety is considered universal, since it can be equally often seen on both entrance and interior doors. This mechanism in its normal position has an extended locking tongue, and when it becomes necessary to enter the room, the handle is pressed and it leaves the grooves. In this case, a lock is usually cut into the canvas, protected by special pads. In order not to damage the latter, disassembly must be carried out as carefully as possible.

In our country, a round handle equipped with a latch is used only on interior doors. Abroad (for example, in the USA) they are often placed on input. It has a key hole on the outside and a locking button on the inside.

Stationary models are installed mainly on swing doors. This design is convenient, but not very functional. In essence, it is an oblong bar on which a U-shaped bracket is attached. In the simplest versions, no locking mechanisms are provided - the door is closed with a separate bolt. More advanced models also have a roller latch, installed independently.

Prepare the following tools for dismantling:

• flat and Phillips screwdrivers;
• thrust wrench (included with the product).

If the model is without bolts (that is, with hidden fastenings), then you need to act in this order:

• Using a flat screwdriver (being careful not to damage the decorative coating of the door), unclip the trim located at the base;
• Unscrew the screws hidden under it;
• use a stop wrench to press directly on the stopper;
• remove the handle by carefully pulling it towards you;
• After dismantling, unscrew the screws holding the locking mechanism.

In simpler round models, disassembly is much easier - just unscrew the two long bolts located on the back side on either side of the latch.

In this case, you just need to unscrew the self-tapping screws or screws securing the strip to the door leaf.

Here it is worth understanding that replacing this type of handle must be done with a similar one in size. Otherwise, traces from self-tapping screws will not be hidden. They are especially visible on varnished surfaces.

Individual models are connected with bolts through the door - this method of fastening is convenient for both the manufacturer and the consumer. In this case, you just need to unscrew them from the back and both handles will be removed.

Lever handle

All that is required is to remove the trim (in most models it is connected to the handle). In simpler versions, you just need to unscrew two screws from the door leaf.

In advanced ones, all fasteners are hidden behind a decorative cap - it either snaps off or is screwed onto a thread. By removing it, you will have access to 3-4 screws that need to be unscrewed with a screwdriver. Don't forget to also remove the clamping screw mounted directly on the handle - it secures the square pivot rod. After this, disassembly can be considered complete.

Assembly nuances

Before placing the handle in its intended place, secure the locking mechanism - turn its oblique surface in the direction of closing the door.

It is important to tighten all screws and screws as tightly as possible - the better you do this, the longer they will not come loose.

After assembly, check how the mechanism works - the latch should fit freely into the groove and ensure reliable fixation.

A door handle is a convenient and necessary mechanism in everyday life, but it, like all accessories and components, tends to break. At some point, the handle begins to sag and dangle, and perhaps even jam. In this case, it must be replaced.

Types of handles and reasons for their breakdowns

Based on the design features of the mechanisms, door handles are divided into the following types:

Main reasons for replacement:

• The door handle broke off, but the base remained in the door.
• The fasteners are loose, it does not fit tightly to the door leaf.
• The fastening element has burst or come off.
• An outdated model that does not fit the overall style of the room.

Replacing a door handle

Replacing the interior door mechanism yourself is not a difficult task if you follow the instructions, prepare all the necessary tools and follow safety precautions.

How to remove the door handle of an interior door?

Before removing it, you should find out what design your handle is, snap or regular.

• The handle with a mechanical latch can be removed by unscrewing the decorative fittings, which are secured with screws. After this, it is determined how the mechanism is attached to the door; usually this role is performed by a small rod located in the door; after its removal, the fittings should be freed.
• To replace an ordinary stationary handle, you just need to unscrew it from the door leaf.
• If the handle has a rod passing through the entire door leaf, you can replace it by unscrewing the part counterclockwise. At this time, you should hold the handle located on the other side of the door structure.
• The round handle is a little more difficult to remove; to do this, you need to use a screwdriver to press the stopper, releasing it, then remove the gasket, unscrew the screws holding the handle together, and then unfasten it from the door leaf.
• The round handle latch is removed by unscrewing the screws holding it in the door leaf.

How to disassemble a door handle?

If you follow a certain sequence, disassembling the handle will not be difficult; all you need is a screwdriver and a wrench.

• First, use a screwdriver to unscrew the screws that hold the levers on both sides.
• The mechanism is pulled out of the door.
• Using a wrench, you need to remove the rotating mechanism; it is located in the handle and wrapped with a spring.
• Then all parts of the fittings are examined for damage.

Door handle installation

The handle is installed in the reverse order of removal.

If you decide to purchase a new mechanism, you should choose a model that fits the holes in the door left by the previous fittings.

It would be useful for every owner to know how to disassemble the door handle on an interior door. This element is exposed to daily impact from the residents of the house, and the handle is not always treated with care, and therefore sooner or later it may break or you simply want to change it to a new model. In this case, in order not to call a specialist, you can do everything yourself. In addition, disassembling and reassembling a door handle yourself is not so difficult.

Different types of door handles are disassembled differently

Types of handles

Before you start work, you need to decide on the type of fittings. All door handles can be divided into several groups. This classification is perhaps the determining factor when disassembling the structure. So let's take a look:

• Stationary. Not connected in any way to the lock or latch. Serves solely to move the door leaf. Attaches with simple screws or self-tapping screws. It can be one-sided or two-sided, connected by an axial element.
• Push. Usually it has the form of an L-shaped structure with fastening on both sides of the canvas. When a load is applied to the handle, it causes the halyard tongue to move and allows pressure to open the door.
• Rotary. The principle of operation is the same as that of the push model, but you need to turn the handle; most often, such models look like a ball or a button.

Main types of handles for interior doors

Due to its shape, the push model has a certain disadvantage: it can easily be hit. The disadvantage of rotary samples is that a person’s hand can slip along its surface, which makes it difficult to open the door.

There are also models with a decorative flange and on a rosette. What are their main differences? When using a socket, you do not need to drill a huge hole in the door. In addition, such a handle is full-bodied and heavy. But decorative overlays are usually large in diameter and are installed on lightweight hollow nobs with a lock or latch. Both options are worth considering.

Why disassemble the handle

Since these models of door handles are disassembled quite simply and according to a similar principle, anyone can learn how to do this without any problems. But disassembling and assembling handles is not a routine process; the need for this does not always arise. What could lead to such a need?

• Breaking. This is one of the most common reasons, especially for cheap Chinese products. Over time or due to rough handling and ignoring preventive measures, the mechanism wears out and some of its parts fail, so it is necessary to carry out timely repairs to the fittings.
• Replacement of an outdated model. Every year new product models enter the market and it makes sense to replace old models with more advanced ones in technical and aesthetic terms.
• Repair. When renovating a house, most often the interior changes radically in terms of style, so the old door handle may not be suitable and then it needs to be disassembled and replaced.
• Scuffs. The lower the quality of the decorative coating, the sooner such a handle will become unusable due to the appearance of abrasions, peeling paint or chips on its surface. It is better to replace such fittings if you do not want to spoil the overall impression of the room.

During long-term use, the handle mechanism often fails.

Push

The most popular model of handles for interior doors is push-type. In order to disassemble this type of product, you only need to take one screwdriver. First, unscrew the handle itself, that is, the pressure element. On the side or bottom of such models there is a small recess with a hidden screw; you need to unscrew it with a screwdriver and then remove the element from the axis. In some cases, you may need a hex wrench instead of a screwdriver.

After this, remove the decorative trim that masks the main fastener; in most models it has a thread, so you just need to turn it several times. The screws will open in front of you. Carefully unscrew them and pull the structure towards you, holding the handle on the other side, now you can remove it along with the rotating axial element.

If you need to disassemble a latch or lock, the steps are carried out in the same order, but in addition you need to unscrew the plate from the end of the blade and remove the mechanism installed in it.

Push door handle

Round with rosette

Now let's look at how to disassemble a round door handle. The principle of operation is very similar, but the main difference lies in the method of removing the decorative turning part. If there is no hole for a key or screwdriver on the side of the handle, then you need to manually separate the elements. To do this, hold the handle on one side of the door motionless, and turn the other part and remove it from the thread; you may just need to pull it towards you.

After that, remove the socket in the same way and unscrew the screws. Remove the axle and proceed to other elements: the lock or latch, if necessary. When removing decorative parts, it is important not to overdo it so that some elements of the mechanism do not burst.

Round door handle with rosette

Nobs

In order to disassemble the round knob handle, you will need an additional special key to clamp the spring mechanism.

The key included in the kit may not be the right length; in this case, it can be replaced with a nail or other thin object.

First, remove the decorative trim from the top. Using a wrench or nail, move the spring-loaded pin, inserting the tool into the access hole on the side, while simultaneously pulling the handle and removing it along with the cap. After this, you need to pry the latch of the decorative flange and remove it too. Then unscrew the mounting screws on the plate. Now you can completely disassemble the handle and remove both parts along with the axle.

As you can see, there is nothing complicated. In order to assemble the handle, you need to perform all the manipulations in the reverse order: first, install the lock and fix it with a plate, then insert the axle and put on the fasteners, and only then assemble the decorative parts. Don’t forget that you first need to thread the decorative flange, and then put on the pressure or rotary part itself.