A tree made from your own coins. How to make a beautiful money tree panel from coins with your own hands

They will still be happy to make them DIY money tree. Moreover, this beautiful craft will serve as a wonderful decoration for the interior and, with practice, you can easily make a wonderful gift for your friends and family, giving them either a topiary with banknotes, or a tree whose branches are hung with jingling lucky coins. Our master classes today will tell you five different options for constructing such crafts.

DIY money tree made from coins

Manufacturing process DIY money tree made from coins, which we will consider first, can be called a classic of such bonsai crafts, both bringing financial well-being and decorating the interior. But, despite the elegant and expensive appearance of the craft, we will use simple and accessible materials for the process. What you will need to buy specifically for these are souvenir Chinese coins with a characteristic square hole inside. This is what we will use to decorate the wire branches.

You need to tie pieces of wire (copper, with a standard diameter of 0.3 mm) to a coin, and you don’t have to worry too much about the same length for all the pieces, it’s okay if some are longer and others are shorter, in any case it will even out in progress. To form the branches, we need to sequentially connect five pieces of wire with coins screwed to them. Focus on the photographs that show the process of creating something like this DIY money tree step by step. When you have managed to weave all the coins together (50 pieces were used in our master class) into a dozen branches, you can start decorating them. Thin wire is good for working with square coin holes, but it will not be able to properly support the weight of all five coins at once, so each branch must be strengthened with an additional piece of wire at the base; for this purpose, take material one millimeter thick, fold it in half and this width should be enough for strengthening. We wrap everything together with dark floral tape and connect it into a single trunk. If necessary, we also add thickness to it using copper wire.

The second stage is to form the tree, because now you need to decorate it, create a stand for it. This stage can take up to half an hour, because we will be plastering the base. To do this, make a solution of alabaster, cement and sand, dilute it with water and pour the resulting mixture into a plastic box of a suitable shape, immerse the wire barrel inside and fix it until the mixture begins to set. After 20-30 minutes, remove and begin to shape the trunk. It needs to be given additional volume, for this again take alabaster, plaster, which is used for cement, dilute it with PVA construction glue (or office glue diluted with water), apply this mixture to the trunk, scratching grooves with the material at hand.

Painting can be multi-layered: a layer of bronze paint, a layer of gold paint, acrylic varnish + glitter. You can proudly give the finished product to your friends, telling how powerful it is as a magnet for money, adding other knowledge, for example, about.

DIY money tree: master class

If you weren’t able to buy Chinese coins, and a lot of unnecessary little things have accumulated in your household, then you can use them to make an excellent DIY money tree. Master Class, which we will look at, is precisely distinguished by the use of real, circulating coins, combined with beautiful, delicate beaded leaves. Creating bead weaving is much more difficult than weaving several dozen leaves according to a standard pattern, using thin wire as the basis for weaving.

Your blanks should be such leaves on legs, and coins of different denominations, the wire on which is fixed in a small drilled hole in the upper part. Drilling metal will be somewhat more difficult than when performing, but here we are talking, rather, about dexterity and the presence of a special thin drill for metal. If no one in your family can dare to do such delicate work, then simply make loops on the wire pieces and glue them to the back of the coins. This is exactly what was done in our case. Again, as in the previous example DIY money tree made from coins, master- the class of which we examined earlier, the assembled barrel needs to be further strengthened by using a thicker, but still quite flexible wire. We thicken the trunk, together with decoration, with a plaster bandage, which is very convenient to wrap from top to bottom, or with its more modern analogue - floral tape.

We insert the base into a glass with unhardened plaster or finishing plaster, since we will not remove the craft after hardening, then initially it is worth choosing a glass that is both elegant and, at the same time, one that you don’t mind. It is convenient to use this method, since it allows you to place additional decor on the surface of the still plastic retainer, for example, another portion of coins, beads, seashells, which, after complete drying, will be securely glued. This way of decorating the interior is an excellent replacement for " " ideas.

DIY money tree photo

The following ideas to create a great talisman are: DIY money tree, photo which you will see below with step-by-step instructions are dedicated to special trees. They do not resemble Japanese bonsai, because these are traditional European topiaries. But the use of coins and banknotes for them as the main and practically the only decoration gives us every right to call them money plants. In the end, it is only our beloved fat woman who deserves this proud title (we remembered about her when studying the issue).

Topiary number one has a classic round shape and a single trunk, a real tree of happiness and good luck. Those who are engaged in this type of crafts know that stores sell round foam plastic blanks for topiary, so as not to have to worry about creating your own. But for this job, a small foam ball (not rubber, as it will need to be pierced to install the base) will work perfectly for you. Select the center of the ball and stick one coin on it. All of them for this work must be of the same denomination, that is, the same size and appearance, this is very important for the overall effect of the finished product. Four more coins are glued slightly overlapping onto the first coin, then, in the next row, you also glue the next eight coins overlapping, moving in a checkerboard pattern. The texture and coating that appears on the ball should remind you of snake scales, or, if you like, a bump. Naturally, having crossed the equator, you will have to reduce the number of elements in the reverse order.

In the opposite center of the ball, leave an empty hole with a diameter of one coin. You will need to pierce it using scissors or a knife to insert the straight stem inside. Additionally, during installation it should be fixed with a layer of transparent silicone glue. To disguise this junction, take a piece of beautiful fabric with a suitable texture, pull it together with thread and form a skirt, which will need to be glued to the base. The other end of the trunk is inserted into a pot with filler, which should be decorated with matching fabric (golden shades). The filler can fix the craft securely (gypsum, plaster) or be temporary.

How to make a money tree with your own hands

The craft that we will consider next is similar to the previous topiary, so the first part of the master class how to make a money tree with your own hands, you can skip. The main difference is that you need to form not one ball with iridescent golden scales, but three.

Continuing the creation of an unusual triple DIY money tree, step by step master class which is in front of you, you can move from the process of decorating the balls to the stage of creating the barrel. For someone who knows how to do it, even a triple barrel will not be a problem. Each consists of three pieces of strong steel wire wrapped with tape. A decorative effect will be provided by twine, which is carefully wound in a dense layer on each trunk, but not from the beginning and not to the end. The beginning is a segment that will be inside the ball of the workpiece and there is no need for twine there and in the same way it is not needed at the ends, which will be woven into one wide trunk.

The connector can be hot glue, which must be applied both to the wire shafts themselves before insertion into the ball, and to the finished joint. If necessary, decorate it with coins or twine. In our example, we also used twine to decorate a flower pot – a topiary stand.

DIY money tree from banknotes

And the last example of topiary - DIY money tree made from banknotes. Since it is difficult to find banknotes that you wouldn’t mind using for crafts, you can get the job done using souvenir banknotes, which in appearance cannot be distinguished from real ones.

In the third example, we probably don’t need to dwell in detail on creating a ball and a leg. It is worth taking a closer look at the process of rolling banknotes. There are two main types in this craft - rolls tied with a piece of twine, and small fans for which the paper is folded like an accordion.

When you have made a sufficient amount of decor, cover the base ball with it (preliminarily paste it with several bills so that there is a single color), using hot glue. It is best to move from top to bottom, then you will calculate the amount of material correctly and maintain the shape of the ball. Additionally DIY money tree from banknotes master- the class we are considering can be decorated with souvenir coins, and with them, complete with a couple of rolls, you can decorate the top of the pot.

Hi all!

This time I will show you a master class with which you can attract a lot of money or even two heaps) We will create a panel - a money tree!

To do this you will need the following:

• Photo frame (choose the size yourself);
• Napkins;
• PVA glue;
• Adhesive for rubber, leather, etc. (transparent);
• Container for mixing the water-glue mass;
• Sackcloth;
• Hot melt adhesive;
• Acrylic paints;
• Glitter.

Well, let's get started.

Step 1.

Take a photo frame and remove a piece of cardboard from it (you can cut another one to fit the internal size of the frame).

Step 2.

We cut out a rectangular piece of burlap a couple of centimeters larger than the cardboard from the frame - with an allowance on all sides.

Step 3.

We glue the burlap to the cardboard with rubber glue on the front side, bend it and glue the edges (which we left in the allowance) to the back side. To prevent the edges from bending when gluing, you can secure them with paper clips. We are waiting for the glue to dry.

Step 4.

We'll need a little artistic skill here. On the front side of the panel we draw a sketch of the future tree (you can first mark along the edges the distance where the frame will cover the panel - these areas should be left free). The shape is completely arbitrary, as the heart tells you)).

Step 5.

We make a water-glue mixture from PVA and water. You don't need too much water, it's about the consistency of kefir.

Step 6.

We take napkins, fold them into a rope and soak them in the adhesive solution. Then we glue them onto the sketch that we drew - forming the trunk, roots and branches of the future money tree. Places where there is a large accumulation of glued flagella (usually the trunk), we coat well (you can even water it a little) with an adhesive solution to strengthen it. Make flagella of different diameters and sizes, get creative!

Step 7

Now that everything is dry, we begin painting our panel. In this case, the main color is brown.

Step 8

When the base paint has dried, we begin to apply the second layer (here it is golden in color). After the second layer of paint has dried, you can highlight the relief and emphasize the texture of the panel with a slightly different shade of paint, using the “dry brush effect”. If desired, the final result of the panel can be decorated - sprinkle the still wet paint with yellow or bronze glitter, or, if the paint has already dried, apply rubber glue to the places where you would like glitter and sprinkle them on it. After the glue has dried, shake off any remaining residue and remove it with a soft brush.

Step 9

After all layers of paint and glue have dried, we glue coins, previously degreased with alcohol or solvent, to form the crown of a money tree. Coins can be painted or varnished if desired, as you like, as you see your money tree.

Step 10

The frame can be left just wooden or decorated in some way, again it all depends on the flight of your imagination. In this case, the frame will be gold, just like the panel. After the frame and panel have dried, we insert it into the frame, hang it on the wall, and in about an hour, they will definitely bring you a bag of money! Or maybe four!

OK it's all over Now! As you can see, nothing complicated, but very beautiful! And useful for increasing your financial status!

at 03/19/2018 4,484 Views

Money topiary makes a great souvenir and an excellent gift idea for friends, family and loved ones

Everyone inevitably faces the problem of finding a gift for a friend, relative or colleague. It’s not always possible to choose a good souvenir, even if you know the person, his habits and tastes well. What can we say if the hero of the day is not so close, and asking about preferences on the eve of the celebration is not always appropriate. In such cases, an original gift, made with your own hands, which will always find its place in the house, will help you get out of a difficult situation.

• • Description and features
  • Money tree: master class
  • DIY money cake

17

Description and features

The history of the appearance of topiary began with the heyday of landscape design, when perfectly straight plants with beautiful haircuts began to decorate the gardens of aristocrats. All kinds of figures were cut out of the tree crowns, competing in skill and flight of imagination. Over time, topiary began to be used in garden floristry, creating bouquets of incredible beauty.

15

Today, the art of creating crafts in the form of a tree, consisting of a trunk, crown and pot, has gone beyond strictly defined boundaries, and topiary is called not only flowers and trees, but also all kinds of crafts.

117

Money topiary occupies a special place in needlework, as it is great for gifts. This souvenir has a number of features, among which are the following:

• • Originality of idea and unusual implementation. When making a gift, you can come up with many options by making a topiary in the shape of a ship or a cake.
  • Demonstration of creativity and the opportunity to give a gift without spending a lot of money. A homemade gift always evokes more emotions than buying a banal set.
  • An interesting legend that the money tree brings good luck and prosperity to the house. Such superstitions are inherent in many nations and are ancient traditions that are carefully protected and passed on from generation to generation.

There are many ideas for creating a money tree.

Advice! The choice of denomination of banknotes, as well as their authenticity, completely depends on the master. If you plan to give a small amount, you can add one real bill to the place of honor.

Money bouquet - another super gift idea

Money tree: master class

One of the most popular types of topiary is a money tree made from bills and coins. Making such a gift is not at all difficult if you follow the instructions step by step.

To make a souvenir you will need:

• • a small pot for indoor plants or a mug;
  • coins and bills;
  • glue and double-sided tape;
  • leg-split;
  • scissors;
  • alabaster;
  • sushi stick.

It is better to have the necessary tools at hand

• • • Take a sushi stick and tie a knot of twine at the end, then wrap the rope around the entire stick to create a tree trunk. Place the finished barrel in a pot and secure it with alabaster, leaving space on top for coins.

Of course, the money tree for decoration is made from drawn banknotes

• • • • Take the bill and fold it in half, slightly moving the edges. It must be folded unevenly so that the edges move, after which the uneven edge must be secured with double-sided tape and glue. Make an envelope from the folded bill, securing the edges with the glue-coated side.

Technique for folding banknotes

• • • • • For a flower you will need 15 such envelopes; use the same technology to make 14 more pieces. From the resulting 15 envelopes, assemble a flower; the corner of the envelope should be in the center, expanding towards the outer edge. Grease the right side of each envelope and secure all bills together using double-sided tape.

Connect the elements together using a glue gun or tape

• • • • • • Take two identical coins and glue them to the center of the resulting flower, one on each side, to secure the flower. Take a pot with a trunk and smear glue on the top of the trunk, putting a flower from envelopes on it so that the trunk is hidden inside. Secure with glue the back side of the barrel, which is covered by the inside of the envelope.

Elegant tree with your own hands

• • • • • • • All that remains is to decorate the pot with coins. To do this, take the resulting tree and coins. Lubricate each coin with glue and fix it under the tree trunk in a random order, placing one on top of the other to make a pile of coins.

The money tree is ready!

Advice! When working with coins, it is better to use a more reliable glue so that the structure does not fall apart. A glue gun or superglue is suitable for this.

13

DIY money cake

This master class is perfect for a gift with genuine banknotes, since the money will remain intact, without traces of glue or creases. A cake made from banknotes will be an excellent gift for a wedding, where a monetary souvenir is especially relevant, and the presentation will become more impressive and memorable.

For production you will need:

• • • • • • • thick and thin cardboard;
            • thin satin ribbon and elegant bow;
            • paper clips;
            • double-sided tape and glue;
            • bills (at least 100 pieces).
              • Take thick cardboard and cut out 3 bases for each tier.

Blanks for money cake

Important! The largest one should be about 30 cm in diameter, and each subsequent one should be 2-3 cm smaller.

• • • • • • • • • Cover the edge of the base with satin ribbon to hide the cut. From thin cardboard, cut 3 strips for each base. The height of the strip should correspond to the bill rolled into a tube, and the length of the rolled strip should be adjusted to the circle.

The base of the cake is the largest part in diameter.

Advice! The folded strip should be slightly smaller than the base so that the money tubes can fit on it.

• • • • • • • • • When cutting out the strips, make 6 triangles in diameter equally spaced around the circle on one side and the other entirely from jagged edges. Fold these edges and spread with glue, securing the edge of the cake to the base.
                • Take a bill, roll it up and secure it with a paper clip. Use the outside of the paper clip on the bill to place it on the side of the cake. Do the same around the entire circle. Using the same principle, make the remaining 2 bases and decorate each with banknotes.
                • From thin cardboard, cut out another circle corresponding to the diameter of the smallest base. A circle of thin cardboard is the top of the cake. In its center you need to secure a bow with glue.
                • Assemble the cake by gluing one tier to the other by the visible triangles.

Cash trade is ready!

Custom handmade gift

Advice! If dollars are used, the tube should not be rolled all the way so that the president's face can be seen. Each subsequent bill is attached to the left, covering the tail remaining from the previous one.

15

You've probably seen a money tree in someone's house at least once.

This is a DIY craft that looks like a small tree with numerous twigs, leaves and, of course, coins.

The most important element of this decorative home decoration is the coins.

They are considered a symbol of wealth, and such a money tree itself can bring its owner success, good luck in business and business, and will also attract real money.

Regardless of whether you believe in the miraculous properties of the money tree or not, even if it is not alive, but made from scrap materials, such a decorative item can decorate any room or become the main accent in interior design. So, let's take a closer look at how and from what you can build a money tree with your own hands.

How to make a money tree with your own hands

Typically, those who tried to make such a craft used several available materials.

The most necessary thing to create a money tree is wire.

The frame and branches are made from it.

You will also need beading skills.

The fact is that beads are most often used to create leaves; this method is very convenient, especially if you like to do this type of needlework.

Any coins are used as the “fruits” of the money tree. These can be coins with special holes, which are usually sold in stores that sell various small items for handicrafts.

But you can easily use ordinary coins that have become unusable or outdated. Also, some craftsmen, when creating a money tree with their own hands, use coins and tokens made from decorative materials.

In some cases, craftsmen make such crafts using ordinary coins, which are glued to the base of the tree or serve as its crown. But such a money tree must have a three-dimensional trunk and branches that diverge in the same plane.

If you decide to create a money tree with your own hands that has a classic look, then the coins should hang down a little. In this case, it is very important to form a rigid frame and create the correct structure of the branches so that the “fruits”, under the influence of their weight, do not distort the future tree. For making branches, ordinary thin wire will not work; you need one that can withstand the load of coins.

How to make a money tree with your own hands: step-by-step instructions

First, you must imagine what the future craft will look like.

A DIY money tree may or may not have leaves. It all depends on your imagination and skills that may be required in the first case.

To make leaves, you need to acquire beads and thin wire through which the beads can be easily strung. The shape of the leaves can resemble ordinary loops or be similar to natural tree leaves.

Take the wire and thread as many beads through it as you need to create the shape of one leaf. Next, the wire with beads can be bent in different directions, but the easiest way is to make a frame that has several loops with a stem. How exactly to make twigs with leaves is shown in the photo below.

Calculate in advance how many branches with leaves you will need for your tree. It is best to do, as they say, in reserve. But even if you end up not having enough branches, you can always make more. This is what you should get approximately, see the photo below.

Next you need attach coins to the resulting branches with leaves. If you intend to use regular coins that do not have special holes, you will have to purchase a glue gun. Apply one drop of glue to each coin and glue it to the wire, pre-twisted with a small loop. When the glue dries, this wire with a coin can be attached to the branches with leaves. Look at the photos, they show how the whole process happens.

The resulting branches with leaves and coins still need to be strengthened. To do this, wrap the stems with electrical tape or thin construction tape. If you want to create a more realistic shape for the branches, you can use plasticine to cover each branch. After this, give the branches the desired shade; they can be painted with brown paint.

To create a frame (trunk) you will need thick wire, although you can use thin wire, but then it is wound in several layers for strength. First, create the main line of the trunk, after which you can screw the finished branches onto it with wire. Don't forget to leave a few diverging wires at the bottom end of the barrel. They will serve as the foundation due to which the entire structure will be stable. By the way, these same wire branches should resemble the shape of the roots of a real tree.

The trunk of the tree should also be wrapped with tape or tape to secure the resulting frame. To make the crown of the trunk, you will need to make a gypsum-adhesive mass. Take one tablespoon of dry gypsum mixture and the same amount of PVA glue, mix thoroughly until a homogeneous mass is formed. Next, place the frame of the tree on a saucer and fill its base with the resulting mixture.

Next, apply the mixture to the trunk, gradually moving upward. Try to immediately make the necessary irregularities that will look like the crown of a real tree. To obtain such unevenness, you can use available tools, spatulas, brushes, sticks, which are included in the set with plasticine.

When the entire trunk and the beginning of the outgoing branches are covered with materials, leave this matter for several hours to dry. If you want to plant your money tree in a pot with your own hands, then you first need to fix the base of the trunk to the bottom of the container using plasticine, and then fill the pot with a plaster-adhesive mixture.

The last stage of creating a craft is decor. To do this you will need gouache and brushes of different thicknesses. First, paint the tree trunk the desired color. It can be either a brown or a golden shade - at your discretion. The base of the pot can also be covered with gouache, imitating either grass or rock.

When the paint has dried, you can glue small golden-colored beads onto the tree trunk. To fix the result, use a varnish base. Thus, your handmade money tree will acquire a glossy shine.

The money theme in home decor has long been common among creative people. Money is used to make various decorations for the room. They make topiaries, panels and other interesting products. Money trees are very popular among needlewomen. You can make a money tree out of coins with your own hands from inexpensive materials that you have at home.

Topiary made of coins

Most often, such trees are made from small coins, but coins of larger denominations are also found. DIY crafts from 10-kopeck coins are not that difficult to make. Any needlewoman can make such a tree, but you need to know the sequence of work.

For manufacturing you will need the following tools and materials:

• foam ball;
• leg-split;
• stick or rod for the trunk;
• coins.

You should start with making the barrel. It should be tied with twine. You need to make a hole in the foam ball. Insert the prepared trunk there, but do not glue it. This procedure needs to be done to make it easier to put the finished upper part on it later.

At the top of the topiary you need to glue the first coin. Subsequent ones must be glued in a circle. Around the central coin, four more should be glued on different sides. The main requirement for this process is that all the coins were the same. The next row is glued between the previous coins. The entire surface of the foam ball is gradually filled. When this work is completed, you need to put the ball on the leg. The hole must be filled with hot glue and the barrel must be glued to the ball.

Next you need to secure the entire structure in the pot. To do this, you need to dilute alabaster and pour it into a pot. The barrel is installed in the center. A prerequisite must be an even position of the trunk. Otherwise, the weight of the topiary on the surface will be incorrectly distributed. The entire product will be unstable. All that remains is to glue the additional decor and you can consider the work of creating a topiary from coins completed.

In order to diversify the options for such a product, you can use coffee. Coffee beans are glued on the surface of the ball, and coins are glued only on one side. There is a lock around them, which is also glued to the base.

This topiary looks very unusual.

Other examples of work

In addition to topiary, you can make other, quite interesting products. These include panels and various interior decor. You can depict anything on a panel. It could be a tree whose crown consists of coins. Or an image of a Goldfish consisting of pennies.

To make penny wood for the wall you will need the following materials:

• base for panels;
• putty or glue;
• clay for creativity or twine;
• coins;
• PVA glue and hot melt glue;
• acrylic paint and varnish;
• palette knife;
• sponge.

You can use fiberboard or chipboard as a base. If the coins will stick, then thick cardboard will do. In the case of putty, cardboard cannot be used. It becomes deformed from exposure to moisture.

The base must be covered with soft paper. White toilet paper or paper towels are suitable for this. You need to take a piece of paper and place it on the base using PVA glue. This is done to create a textured surface. If such a surface is not needed, then the base can be left flat.

Shaping the trunk

The trunk can be made in three ways. It is made from twine, paper or clay. In the case of twine, it is necessary to glue pieces of this material with glue. The more pieces are glued, the thicker the trunk will be. You need to shape it to your taste. Add bends and various branches as your imagination dictates.

If you use paper for this, the trunk is formed from thin strands. In order to make them, you need to twist a piece of paper with your fingers. When a large number of such bundles have been made, you can begin gluing. They only need to be attached with PVA glue. It is necessary that the paper is completely saturated with glue.

Another way to form a crown is with ornamental clay, which is sold in craft stores. It can make excellent branches and trunk. It also needs to be glued using PVA glue. It must become one with the base.

Making a crown

There are also two ways to form a crown. One of them is gluing with hot glue. Another method is to use putty. Which method you choose depends on what is available.

Coins should be glued according to a specific plan. Each coin must be in its place. The crown should have branches and shape. In order not to make a mistake with this, it is better to have a ready-made option before your eyes. If you use putty, you need to apply it carefully so as not to stain the base. To do this, you can use a palette knife.

When the crown formation work is completed, the product must be left to dry. In the case of hot melt adhesive this is not required. Before painting the work, all parts must adhere well to the base.

Product tinting

Metallic acrylic paint is suitable for tinting. Dark paint is first applied to the surface of the panel. It may be black or brown. The entire product is coated with paint. Then, using a sponge, you need to highlight individual convex areas. To do this, take a little gold or bronze paint and apply it to a sponge. Before painting, you need to make several impressions on another surface so that there is not too much paint on the sponge.

Next, carefully walk over the surface with a sponge. It is not necessary to paint over a continuous layer. It is necessary to highlight only some parts and place accents. After applying this type of paint, the panel will gain volume and sparkle with new colors.

Finally, acrylic varnish should be applied to the surface. It is best in this case to use varnish in a can. It does not have a strong odor and spreads well over the surface.

Registration of work

You should also take care of the frame for the panel. You can buy it in a store and simply glue it on top. This must be taken into account when choosing a base for a panel. The base size should be standard. The frame is selected to the desired size. In the case of a base that has a non-standard size, you will have to make the frame yourself. It can be made of wood or glued together from cardboard. In the future, it is decorated according to preferences.

Attention, TODAY only!